วีดีโอ

It was the Regular 40. But you need to remove resonators as well.

Awesome and thank you

My pulley rubs on side intake

As you can see in my video there was none of that as an issue. I am thinking you are miss aligned somehow and it needs to go forward and down a bit. If really bad reach out to Corsa as well.

I did not have any issues.

So I installed mine yesterday and the hood wont close. I bought the black carbon fiber piece and the install was very easy. I went to close the hood and the right (passenger) side won't latch. I turned the hose clamp 90 degrees that runs along the top of the airbox and this did not fix the problem. I'm stumped and not sure what to do at this point short if sending it back

@@benjaminpeace2967 Not sure what would be wrong. Make sure no tubing is on top and it is all tucked in the right places. Also make sure you have the airbox into that hole correctly in the fender to make sure it is low enough. Try looking to see what is hitting. Maybe put some chalk or something on the top of it to see where it is hitting.

Yep. Going to do a uninstall, reinstall later. The bolts should only go in one way on that fender.. i dont see how i could have put that in wrong, but who knows. ​@barynovacek5982

Awww come on we have skipped before.... If you need next time we can hold hands lol.

All the information I have on this is in the video description.

I don't fully remember any gap in there and should not be. Would need to be tight to filter all air going into the engine. You might want to just verify you didn't have something wrong or a part missing etc. Hope that helps.

Just installed mine late last night. Mine has the same 1/4" gap, but still seems fully seated

No, The computer with the map sensor still there automatically adjusts. I went and ran mine with a tuner and my air mixture was almsot perfect.

I bought it from www.rpidesigns.com/ Then I had the guy that did my air brushing on the engine candy coat the lower sections to give it that ripple depth look.

Yep, all stock.

Thank you, Hope it helped

That was our thought when he was blocking our path. Finally got a stick and moved him along his way so we could pass. Was a great time and 2 of us hold 2x Jasmer now.

The car is much stiffer and does not roll as mush as it used to. If your going to autocross etc it will definitely help

None.

Yes, I have the standard bed as this is a double cab not the crew cab.

@@barynovacek5982 I’m getting the 2023! Crew cab with the standard bed. I think our beds would be the same. Really appreciate your video. Thanks.

I have not replaced it for multiple reasons. 1) I drive low amounts of miles and most is on pavement with it. Mine looks the same today in there. I have taken it out and blew it off to get loose dirt out. When it gets bad I will use something like a K&N recharge kit to wash and then reoil it. I expect it will be in there long after I get rid of the truck and I drive my trucks 20 plus years.

You are not lifting much and it would not mess up toe in or out but could change the camber some. No other person we know of that has done this has, but with that in mind I would think you should, or suffer the worn out tires over time.

Provided you don't have expensive tires on it, and it drives safe for now, those tires will basically tell you how your alignment is in a couple seasons. It looks perfectly normal lifted this much, and might even launch better

No, I bought this truck for that in 2019.

@@barynovacek5982 much appreciated! Soon to be a Silverado owner in Australia 👍

@@petarlujic6446 Awesome, Congrats.

I don't know I never used with the Resonators. I don't get much drone more Tire whining that drives me nuts.

@@barynovacek5982 yours sound great!

@@dc4l157 Thank you

It was in May as I built this video the week after being there. A mountain bike could do it but it is long and in places lots of loose gravel that would need to be crossed. The water we only occasionally and as you can see not deep etc. You could easily cross it.

For my car it feels snappier and quicker on the response from when I give it some fuel. The noise is awesome. It growls more when you are giving it the fuel, kind of like the old days when you turned your air clean cover over and hear the 4 barrel carb sucking in air, but a little deeper growl.

@@barynovacek5982 Great to hear it is working out. May add one to my 19 GS.

I don't have the FS1 flares. Mine as you can see mount with clips from under the wheel well. They don't stand out a much as the FS1. If it was not included you should write them back I bet that is a miss packaging issue. Mine came with everything needed to install.

Smoke

I bought them mostly off of Amazon

@@barynovacek5982 I like the quality of yours. Do you remember the name brand on Amazon they have various different ones.

@@joe7801 Sorry, I looked and can't find where I bought them. Been a few years.

What’s a good exhaust for AT4 2019

I have never looked for one, sorry.

@@barynovacek5982 Okay! Thanks for your reply anyway!

Is that round red filter that you just installed, washable and reusable, just like the K&N type filters? I have the same GM CAI, but bought the truck used. It appears washable but thought I’d ask if you knew? Thanks in advance!

I only used the adhesive that was on the parts from bakflip. I have the factory rhino also but mine has stuck fine for almost 3 years now. Sorry.