I think I just realized why I love cars and cameras so much and not other go kart youtubers, these guys don’t milk as many episodes out of a project as possible for example finishing a project then saying we gotta wait for the next video to even see a test ride
Polaris usually has high, low and reverse seems like your running it in low. I wonder what year and model that is it would totally make a difference but was four-wheel drive so I would see it having having high gear. Could be bad/ stuck, it's possible since the motor was bad. My Polaris transmission has hi low and reverse and the transmission is very iffy.
@@didyliduu They typically respond when reading comments, I think they're tryin to churn these videos out before the meet (And it satisfies youtube algorithm) So they seem to be bit more busy, than say, a month ago.
I'm pretty sure ours just has forward & reverse but ours is a trailblazer 250. Motor isn't stock & I'm really surprised the stock trans is holding up to the shoehorned 1200cc we stuffed in. If interested in checking it out I can copy the link to comments I think
Yeah, friend of mine put B-H exhaust/'mufflers' on his Harley... I was in front of an 18 wheeler going about 55 on my Intruder, he was behind it, and I could easily hear him over that 18-wheeler racket !!! I asked him if it was louder than he expected, but he said no... Way too loud for me! But, I guess, it would warn deer that you're coming down the road... through the woods...
I'm not hating on them, i'm just looking out for them. Would love to keep seeing videos and them not having to load up and head out into the middle of no where to ride.
Johns Mommy & Daddy look like they live in a fairly nice neighborhood, If i lived near them I'd have the law out there every day!!! Why dont they test drive or work on anything at Ike's houses? they are all in the ghetto from what they've shown
Take the old factory muffler and take a small rod and hit it through the muffler. It’ll open it up and be free flowing, factory look, and still not to loud!!!! Did that to some Honda 4 wheelers and sounds gooooood. Have any questions then just leave a comment
The old "trim the cable wrap and change the throw" trick! Impressive. Been using that trick since my early days riding. Good job guys. Always entertaining.
@@Xx_nobody_xX fr the fuck does he care if its loud lol sick of people bitching because of noise, fucking people a selfish retards. Kids staying out of trouble riding having a good time so people call the cops cuz they here a dirt bike. Thats like me complaining everytime i heard a fucking lawn mower running. Iwana call the cops on people making noise with there push m0wer and see if they like it.
I have watched ALL of y`alls videos for a couple of years now(everyone, Ike's channel too)... NEVER STOP! Good Friends(REAL ONES) are rare now days and you guys are legit! Also y`all remind me of Rickey Bobby and that French dude :)
@@isaacitllbefine7231 I finally broke down and bought my own welder a couple months ago because of you guys!.... no BS! I`m building a GO cart`ish/buggy`ish/ATV`ish... IDK what it will be conceited.... but it`s made out of bed frames and random metal bed framing... why?, um... cause I have it and why not? Hopefully it works out and I can make it to an event and meet Y`all :)
I live just minutes from Busco and I watch your videos and I noticed you guys go out there I would like to meet you guys at your meet and greet and show you the Yerf-Dog spiderbox I built I cut a four-wheeler in half and put it on the back end
Dude , you have to do a race cart from the ground up , with like a old school triple two stroke .an Rd 350 cc or kz 550 or 750 triple . Dude it would be insane ! The ride of your life !!!
1. Put a piece of mudflap rubber between the engine and frame (go to a tractor supply or truck stop for a real mudflap, not walmart junk) 2. Use the same mudflap rubber between the footrests and frame 3. It seems like the torque converter isn't throwing the belt as far as it should. I'm sure the original motor cranks a little faster but that thing seems a bit slow. Might be the pulley position (too far or too close) 4. Find out if it's 2 speed
Hey carsandcamreas. Hi my name is chance and I recently started on my own go kart re build it's a 1 seater and I'm super excited!! I just gotta wait for the chain and clutch to come from go power sports!! And I wish I could come to mini mayham but only 14 and were from Arizona so quite the drive and I live on a ranch btw!!!
Isaac really knows his Tater Salad. I bet his Beanies and Weenies also rock. Wow! That intake looked as good as a genuine McFarland Fabrication masterpiece.
Looks like 2019 Power Tour (6/8 - 6/14) starts in North Carolina, works its way westward up and over to Indiana, doubles back and ends in north middle Ohio... goes by us here in Toledo, Ohio on last leg... It has gone through here many times... because of getting around the end of Great Lake Erie...
That belt should be adjusted so it rides at the top of the secondary with no load on it. You should have about 1/32"-1/16" of belt sticking out from the top of the secondary. You will lose a ton of power and speed if it is not adjusted properly. Same thing with the primary, if not using the oem polaris clutch you may have some deflection issues to address. It should be just loose enough to barely touch the outside of the primary shaft at the bottom.
With no muffler, might want the carb a little richer again? Defo right over the target, just a little tuning and bullseye! Yah, cover for the belt. Don't want all the hair plucked off yer left calf. :P
I’ve shortened a couple of those cables. Just cut the black stuff of so you have the metal wrapping inside exposed then cut just 1 row of that metal rapping and pull it off. Not sure how well it will work with ends on the cable. Might have to cut all the rows up to where you want to stop
Sand and round out that wood seat! Maybe the smaller leather foam pad, for vibrations try and out some rubber or poly bushing in-between the engine and the engine plate!
You guys should really try to put some rubber isolators between the engine and the mounting plate to act as vibration damperners. The second thing I notice is that instead of using the mixture screws to lean out or richen the fuel air ratios you always seem to try to change the engine setup to match the preadjustment carb instead of adjusting the carb mixture to the engine you already have. Tune that carb up and you will notice a world of difference with the air filter and exhaust that was already there. Maybe attach the stock muffler to the header pipe but that is just to get rid of that strange angle you had before but that's it.
Now take two mini-bikes and attach them together side by side. Rigid handlebars on one and have the other control the steer tires, throttle, and brake for both. It would look silly but I bet it would be fun.
That Roster was hilarious just running off like wasnt me bro,,,,,lmao😂😂
I think I just realized why I love cars and cameras so much and not other go kart youtubers, these guys don’t milk as many episodes out of a project as possible for example finishing a project then saying we gotta wait for the next video to even see a test ride
Nah, that's guys like RBG.
Polaris usually has high, low and reverse seems like your running it in low. I wonder what year and model that is it would totally make a difference but was four-wheel drive so I would see it having having high gear. Could be bad/ stuck, it's possible since the motor was bad. My Polaris transmission has hi low and reverse and the transmission is very iffy.
Nick Reynolds yeah I keep trying to tell them that I don’t think they realize you have to hit the foot brake to get it in high range
Oh god this so much. They say they read comments but i call that bullshit. :D
@@didyliduu They typically respond when reading comments, I think they're tryin to churn these videos out before the meet (And it satisfies youtube algorithm) So they seem to be bit more busy, than say, a month ago.
I'm pretty sure this 300 only has one forward gear. My grand father has a cheap model Polaris that only has one forward gear.
I'm pretty sure ours just has forward & reverse but ours is a trailblazer 250. Motor isn't stock & I'm really surprised the stock trans is holding up to the shoehorned 1200cc we stuffed in. If interested in checking it out I can copy the link to comments I think
I was in a hurry today walked into Tractor Supply saw this guys standing in line that was kind of crazy. love the show!
Ryan Smith 😳
IDK how anyone can NOT like these videos. You guys make me wish youtube had a love button
Can’t wait to see the blaster, it will be faster and quicker.
At the rate you guys are going with loud exhaust, won't be surprised if your neighbors shut you down for good on that stretch of road.
@TheTallWizard - Neighbor prolly hates minibikes, karts, SUVs, etc...
Yeah, friend of mine put B-H exhaust/'mufflers' on his Harley... I was in front of an 18 wheeler going about 55 on my Intruder, he was behind it, and I could easily hear him over that 18-wheeler racket !!! I asked him if it was louder than he expected, but he said no... Way too loud for me! But, I guess, it would warn deer that you're coming down the road... through the woods...
I'm not hating on them, i'm just looking out for them. Would love to keep seeing videos and them not having to load up and head out into the middle of no where to ride.
Johns Mommy & Daddy look like they live in a fairly nice neighborhood, If i lived near them I'd have the law out there every day!!! Why dont they test drive or work on anything at Ike's houses? they are all in the ghetto from what they've shown
Ricers paradox...cuz making it louder makes it go faster.. O_o..
Don't these quads have a two speed gearbox behind the CVT? I think you have to hit the foot brake and shift it into high
No. There is not a two speed forward gear box. These only have forward and reverse
@@ncphenom2309 Thanks Bill, I watched the latest video and found that out.
Loud pipes save lives. This is one of your best builds yet.
I like the golf cart better but everyone has their own opinion 😉
Who’s ready for Ike’s beanies and weenies!?! LOL
have you ever thought of using the rear end of a panzer garden tractor for one of your projects
Take the old factory muffler and take a small rod and hit it through the muffler. It’ll open it up and be free flowing, factory look, and still not to loud!!!! Did that to some Honda 4 wheelers and sounds gooooood. Have any questions then just leave a comment
The old "trim the cable wrap and change the throw" trick! Impressive. Been using that trick since my early days riding. Good job guys. Always entertaining.
That rooster has it in for Ike. Watch your back dude. 8:46
"I need some protection so I can party." LOL!!!! Classic. I don't care what anyone else thinks, this thing is cool man!
Ok Chicken Joe needs to be a part of the show from now on, his comedic timing was...imPECKable... anybody?
PeeweeTheKiwi 😂😂😂👍
Have you guys thought about getting like a slip on dirt bike muffler? They usually have fiberglass packing in them and should quieten it down a bit
someperson exactly I think that every time
I second this
Quiet it down? Lmfaoo i think not lol the louder the better lol
What are you his neighbor? Bahahaha
@@Xx_nobody_xX fr the fuck does he care if its loud lol sick of people bitching because of noise, fucking people a selfish retards. Kids staying out of trouble riding having a good time so people call the cops cuz they here a dirt bike. Thats like me complaining everytime i heard a fucking lawn mower running. Iwana call the cops on people making noise with there push m0wer and see if they like it.
That ct70 is gorgeous
I just got my daughter a 2016 Hammerhead 150 Platinum. Would love to see some videos of upgrades on a GY6 engine. Thanks guys love your videos
that dang old rooster is getting brave again
lookin forward to the ct70 build, great vid as aalways
Awesome that you follow this, I can't wait for the CT70 videos also. Excellent work on yours.
I love both channels!
Make a hot dog trailer for the meet up!!! That can be pulled behind a go cart or the golf cart would be awesome!!!!
Yes!
Awesome man can't wait too see the Ike-mobile in action
Beanies and weenies, the bachelors culinary master piece. Needs a muffler, maybe glass pack or make one with baffles spaced large.
Thats a nice red honda trail bike !
I have watched ALL of y`alls videos for a couple of years now(everyone, Ike's channel too)... NEVER STOP! Good Friends(REAL ONES) are rare now days and you guys are legit! Also y`all remind me of Rickey Bobby and that French dude :)
Took me this long to comment on a video... thank that loud ass rooster, he finally got me :)
Thanks for watching
@@isaacitllbefine7231 I finally broke down and bought my own welder a couple months ago because of you guys!.... no BS! I`m building a GO cart`ish/buggy`ish/ATV`ish... IDK what it will be conceited.... but it`s made out of bed frames and random metal bed framing... why?, um... cause I have it and why not? Hopefully it works out and I can make it to an event and meet Y`all :)
Use rubber spacers for the foot holds to minimise vibrations
This will help a toooon
@@imagineaworld on the engine mounts too
I live just minutes from Busco and I watch your videos and I noticed you guys go out there I would like to meet you guys at your meet and greet and show you the Yerf-Dog spiderbox I built I cut a four-wheeler in half and put it on the back end
NO REGRETS ATV CLUB See you Saturday?
Dude , you have to do a race cart from the ground up , with like a old school triple two stroke .an Rd 350 cc or kz 550 or 750 triple . Dude it would be insane ! The ride of your life !!!
gotta love a boomin bench seat
guys to get rid of vibration use rubber motormounts like the new generators have so that way you wont shake your brains out!
i have used some on a smaller preadator but they are a little pricey
@@beaterboyz6796 I saw it on amazon for $10.99 for four at the cheapest.
@@beaterboyz6796 ive used rubber plugs with a hole drilled out in center
I friggin’ love this channel
Me and my friend have to make a manifold today as well for his 420cc.cool video I love the rosters and chickens
I would tune the idle air mixture some you get the best possible mixture below 1/4 throttle. its pretty awesome otherwise
You guys are on the right track.
YOU GUYS ARE JUST AS BIG OF A HACK AS ME !! I LOVE IT !!
Awesome to see you guys getting into full size atvs. Just eBay a factory Hawkeye cvt cover for it maybe. Fenders too possibly.
1. Put a piece of mudflap rubber between the engine and frame (go to a tractor supply or truck stop for a real mudflap, not walmart junk)
2. Use the same mudflap rubber between the footrests and frame
3. It seems like the torque converter isn't throwing the belt as far as it should. I'm sure the original motor cranks a little faster but that thing seems a bit slow. Might be the pulley position (too far or too close)
4. Find out if it's 2 speed
Awsum guys I'm sure the ladies r guna luv wrapping there lips around Ike's beanies n weeny hehe sweet build keep em coming
Need to find a different primary clutch. The belt isn't going up as far as it should.
Like to see that CT70 going I'm a old school fan I have five three wheelers a old Kawasaki quad in great job on the four-wheeler
Couldn't keep my eyes off that beautiful ct70
Hey carsandcamreas. Hi my name is chance and I recently started on my own go kart re build it's a 1 seater and I'm super excited!! I just gotta wait for the chain and clutch to come from go power sports!! And I wish I could come to mini mayham but only 14 and were from Arizona so quite the drive and I live on a ranch btw!!!
Skeletongaming Sounds like fun, wheeling on a ranch! 👍
I agree with the others something is wrong with your gearing.Too much noise not enough go. Should go 50 mph with a muffler.
Front pulley too small
Awesome build, keep up the good work!
The Ikemobile. Nice
That thing looks freaking INSANE!.... I love it! xD
Isaac really knows his Tater Salad. I bet his Beanies and Weenies also rock. Wow! That intake looked as good as a genuine McFarland Fabrication masterpiece.
Perhaps that smog pump supercharger from awhile ago would be a good addition?
I still use that potato salad recipe to this day. Except i added some hard boiled eggs into the mix.
Been waiting for this video cant wait for more. Keep them coming awsome videos get excited when i see yall uploaded new vid haha
That thing is fing fast dame it is a asome atv asome vid man
Dude i am excited to watch beanies and weanies live, not gona lie.
After watching the preview of John flying down the path I thought to myself... spoil alert, Isaac lost paper scissors rock again.
Awesome! Please do something with gears and clutch!
Put fake akrapovic exhaust from AliExpress that's should be nice sound and no restriction
That chicken is awesome.
Looks like 2019 Power Tour (6/8 - 6/14) starts in North Carolina, works its way westward up and over to Indiana, doubles back and ends in north middle Ohio... goes by us here in Toledo, Ohio on last leg... It has gone through here many times... because of getting around the end of Great Lake Erie...
You guys need to do a meet in Pittsburgh pa
We just finished a #rotax #1200 #polaris trailblazer 😁 good build though guys! Good job!
Put some shop rags on the handle bars and some pool noodles on the foot rests to dampen vibration
10:10 Artisan wood work.
I actually loved that potato salad video
John has reached telepathic rock paper scissors
Like how the guy with no mechanical back round is telling the guy with mechanical back round about his welds lol , good build right here
Just about anyone can critique, but good feedback is hard to find. No matter where it comes from.
That belt should be adjusted so it rides at the top of the secondary with no load on it. You should have about 1/32"-1/16" of belt sticking out from the top of the secondary. You will lose a ton of power and speed if it is not adjusted properly. Same thing with the primary, if not using the oem polaris clutch you may have some deflection issues to address. It should be just loose enough to barely touch the outside of the primary shaft at the bottom.
I don't think that go power sports primary is a good match for the stock secondary pulley should put the original on it
That rooster wants to get Ike by the beanie weenies.
I'm excited for the beenie weenie video.
ducati ATV...the only right path to take :D
Ducati + ATV = DEATH.
love the quad it’s awesome can’t wait to see it at Busco beach
Ok, i have to admit it. This 420cc swap seemes like the perfect choice!
I straight piped my oppy Briggs. My neighbors hate me. Lol
I hear ya!
Good video and the roster crowing lol
Love watching you guys. Very informative. Keep um coming.
Ike looked like a bird getting offered food when John called it the ikemobile
With no muffler, might want the carb a little richer again?
Defo right over the target, just a little tuning and bullseye!
Yah, cover for the belt. Don't want all the hair plucked off yer left calf. :P
Hell yeah! Keep it LOUD!!!
Make a video on that red ct70
That would be a beast with a big cam!
That rooster getting into your videos lol, funny tho, great videos
@11:00 John's laugh reminded me of the goosebumps intro the part where it goes do, doo, do, do.
You'll need the 4wd harness to make it work with that yellow switch
You guys need to make some merch with your rooster on it meme it.
Derpydog 100 That’s what I said too!! Great minds...
You are on the right track.
I’ve shortened a couple of those cables. Just cut the black stuff of so you have the metal wrapping inside exposed then cut just 1 row of that metal rapping and pull it off. Not sure how well it will work with ends on the cable. Might have to cut all the rows up to where you want to stop
That's awesome! Get some mud lites for it or some executioners, something AWESOME! Nice job!
Sand and round out that wood seat! Maybe the smaller leather foam pad, for vibrations try and out some rubber or poly bushing in-between the engine and the engine plate!
any one else notice the sweet paint on that ct70 at 8:16!
Yeah its got me keen for more ct70 vids
you know what else is loud? THAT FRIGGIN ROOSTER!!! lol
Dude, IKE! Bring yo beanies and weenies to Oregon!
You just went full hill Billy Bob on this one rofl
Rubber grommets under the engine? Also are you guys bringing anything for Oregon?
When did you guys get the red ct70 in the back?...
You need thick rubber washers between the motor an engine brake will help with vibration
TOLLDDD YOU!! TOLLD YOUUUU!!!!! IT WAS THE EXHAUST!!!!!
I've got a Polaris 400 and it should go 70 mph ez!
Dang that ct70 is minty
You guys should really try to put some rubber isolators between the engine and the mounting plate to act as vibration damperners. The second thing I notice is that instead of using the mixture screws to lean out or richen the fuel air ratios you always seem to try to change the engine setup to match the preadjustment carb instead of adjusting the carb mixture to the engine you already have. Tune that carb up and you will notice a world of difference with the air filter and exhaust that was already there. Maybe attach the stock muffler to the header pipe but that is just to get rid of that strange angle you had before but that's it.
U guys are super cool. Ik you guys need to be safe, but I wanna see something bigger and faster. Dune buggy, 450cc quad please 💯
Ike does all the work and never gets the test ride. Lose up on Ike. He is the man anyway
Helmet, bubble wrap, pillows, can't forget the crayons, all n check!!!!!!!!!! N the rooster crows!! He agrees!
Duck tape!!!!!!!
Bubble gum!! Can't forget baling wire, super glue, n flex seal!!!😎
Now take two mini-bikes and attach them together side by side. Rigid handlebars on one and have the other control the steer tires, throttle, and brake for both. It would look silly but I bet it would be fun.