I got a new VHS tape called Competition Reloading with Brian Enos. The entire video I was like, “I know that voice really well from somewhere, but WHERE?!!” I found where that voice came from! Thanks for your years of contribution to our community. Much love, Lenny.
Lone Ranger - In the video it teaches how to load your own rounds using a Dillon press. It shows Brian Enos, who is a competition shooter, being interviewed by someone off camera. In the video it never shows the off camera interviewer, but through the entire video I was bothered by the fact that I knew the voice so well, yet couldn’t quite place who it was. It was a video produced by Lenny Magill. I was pretty excited when I figured it all out.
I believe in this man, the conviction in his words. Plus even when he is imagining and demo holding a gun or holding thr gun in his hand describing how to shoot he puts his hands in propped position his body behind it u can see its built into him and he always safe checks his gun as he picks it up. Respect
Relax dude u sound like your about to orgasm lol hes supposed to sound like that its buisness hes trying to sell these products and take your money thats the whole point lol
Hi, you are offering a "captured" and a "non captured version" of the "Pure Tungsten Guide Rod". Obviously for a carry gun I would prefere the captured version. I do not see how the captured version is assembled. Would it be possible that I change the spring by myself if it is getting weak over time by myself? Is it the same principle with a fixing screw and locking glue like with your standard steel guide rod? Could the GRT tool be used? I am nit sure because it looks like that the diamter of the Pure Tungsten Guide Rod is larger than the standard steel version and whether it will fit into the GRT??
Lenny, I recently purchased a Gen 4 21, I've been learning from you well before this purchase and I'm thankful for all of you're knowledge. I want to get a pure tungsten uncaptured guide rod for my 21, does the one you sell for the 17 work in a 21?
Definintely shoots flatter, i love it. The 13lb spring is too soft after 500 rounds the slide doesnt close all the way when manually racking it. I got a 15lb spring and cut 2 coils off so it's like a 14lb.
Are you running a factory weight striker spring or a reduced power one? The striker spring works against the recoil spring. A good test of this is to see if it fails to go into battery with the trigger held back but does when released.
Only gun I've ever needed to change a guide rod/spring on, is a CZ P07. The things are set up for hot NATO ammo, and the slide is tiny giving you barely any grip to rack it. Anything else, should really stay stock for reliability. Save the money, buy ammo and train instead.
Where can I found that Glock barrel 3:45 ? The one being used as a demo ! I’d love to have that . Dose anyone know what item number it is. I’d go grate with my gs pure tungsten set up .
Thanks a lot for all your awesome videos But I have a question for and that I got an answer I carry glock 20 sf and Underwood ammo 115 gr extreme defender (1700 fs) what recoil spring whight is the best for this hot ammo? Thanks alot
We need a Nashville update video!!!!!!! I can’t wait for the grand opening I’m Savin my money. Well I’m trying you won’t quit coming out with all this new parts!!
It's coming soon. We're working on our SHOT Show videos right now, but the latest Nashville Update will be right after those. I'm thinking mid to late next week.
I got a new VHS tape called Competition Reloading with Brian Enos. The entire video I was like, “I know that voice really well from somewhere, but WHERE?!!” I found where that voice came from! Thanks for your years of contribution to our community. Much love, Lenny.
Where did you get a new vhs?
@@m17x4v7 Roots Market in PA. Epic NOS find
Lone Ranger - In the video it teaches how to load your own rounds using a Dillon press. It shows Brian Enos, who is a competition shooter, being interviewed by someone off camera. In the video it never shows the off camera interviewer, but through the entire video I was bothered by the fact that I knew the voice so well, yet couldn’t quite place who it was. It was a video produced by Lenny Magill. I was pretty excited when I figured it all out.
I have that same video. Been watching Lenny for years. He's a treasure.
VHS ?
Just got and installed my tungsten guide rod.
WOW!
That's all I've got to say, Len... WOW! 👍👍👍
I believe in this man, the conviction in his words. Plus even when he is imagining and demo holding a gun or holding thr gun in his hand describing how to shoot he puts his hands in propped position his body behind it u can see its built into him and he always safe checks his gun as he picks it up. Respect
Relax dude u sound like your about to orgasm lol hes supposed to sound like that its buisness hes trying to sell these products and take your money thats the whole point lol
Hi, you are offering a "captured" and a "non captured version" of the "Pure Tungsten Guide Rod". Obviously for a carry gun I would prefere the captured version. I do not see how the captured version is assembled. Would it be possible that I change the spring by myself if it is getting weak over time by myself? Is it the same principle with a fixing screw and locking glue like with your standard steel guide rod? Could the GRT tool be used? I am nit sure because it looks like that the diamter of the Pure Tungsten Guide Rod is larger than the standard steel version and whether it will fit into the GRT??
Great, I hope you eventually make these for the big Glock 20 and 21's?
I bought a Gen 4, G-19 from Lenny. I want to return to improve it esthetically.
Love the glock 22, thanks for the info, I will be purchasing one.
This is designed to add weight to the handgun yet the website doesn't list the weight of the guide rod. What sense does that make?
I have the 4th gen tungsten guide rod for a g19, I am curious if the spring is replaceable or is it considered garbage after it wears out?
Lenny, I recently purchased a Gen 4 21, I've been learning from you well before this purchase and I'm thankful for all of you're knowledge. I want to get a pure tungsten uncaptured guide rod for my 21, does the one you sell for the 17 work in a 21?
Definintely shoots flatter, i love it. The 13lb spring is too soft after 500 rounds the slide doesnt close all the way when manually racking it. I got a 15lb spring and cut 2 coils off so it's like a 14lb.
Are you running a factory weight striker spring or a reduced power one? The striker spring works against the recoil spring. A good test of this is to see if it fails to go into battery with the trigger held back but does when released.
Can we trade in the previous model? Only bought them recently!
I don’t see one for the Glock 26 gen 5.
Only gun I've ever needed to change a guide rod/spring on, is a CZ P07. The things are set up for hot NATO ammo, and the slide is tiny giving you barely any grip to rack it. Anything else, should really stay stock for reliability. Save the money, buy ammo and train instead.
Agree with shooting/training. Disagree with not changing out springs,
For competition shooting with lighter loads, lighter springs make a huge difference.
Will probably get one at some point... good video.
How can I buy one for my g23 gen5. Im in the Philippines
On the UNCAPTURED guildrod spring not as compress as the Captured guildrod when installed???
On a Gen 5 G34 Uncaptured .....does it require a bushing or any adapter to use or just spring and rod?
Hi! Planning to buy one, but not sure which spring weight to choose for my glock 35 gen 3. Thank you
DOES IT WORK JUST AS WELL FOR THE 10 MM GLOCK 20 ?
Might be a dumb question, but will Wolf springs fit this, or do I have to use proprietary springs if I switch to this?
Whats a good set up for glock 23 ? Full tugsen and the standard 17 lbs? Or should i move up or down in weight for less recoil?
i like that you made out of a cheap and easy made Glock a precious and esthetic gun / glun glock gun
Where can I found that Glock barrel 3:45 ? The one being used as a demo ! I’d love to have that . Dose anyone know what item number it is. I’d go grate with my gs pure tungsten set up .
Thanks a lot for all your awesome videos
But I have a question for and that I got an answer
I carry glock 20 sf and Underwood ammo 115 gr extreme defender (1700 fs) what recoil spring whight is the best for this hot ammo?
Thanks alot
I got a question I'm running a polymer80 pf45 with a compensator what spring weight would be recommended to run reliable
Lenny, newbie question. Will Gen 4 backstraps work on Gen 5's?
No
We need a Nashville update video!!!!!!! I can’t wait for the grand opening I’m Savin my money. Well I’m trying you won’t quit coming out with all this new parts!!
It's coming soon. We're working on our SHOT Show videos right now, but the latest Nashville Update will be right after those. I'm thinking mid to late next week.
I wanted to get one but it’s 120.00
Nice video,.Thanks Lenny.
Saw those jacked arms in the thumbnail and thought this was one of my fitness channels I follow at first lol
Is the short tungsten rod recommended for a 43X?
Hi lenny do you have it for glock 26 gen 5?
Any plans to offer one for a G41?
are there any tricks for installing new guide rod, and are there any problems if it extends past the frame,
If it extends past the frame you bought the wrong one.
Hey Lenny do you ship overseas
Bought my first glock it was a glock 34 first two shots jammed very disappointing
What Weight spring comes with a store bought Glock 19, 17
Usually its 17 lbs stock
i would like to see a test
is it CC friendly?
My credit card loves it.
I would pay to hear a conversation between Lenny and Harry Shearer.
Why does everything in this video sound like innuendo
We need a Glock 42X. I want a Glock 42X.
Pure tungsten !!!!
U mean your old one was from china ...50%tungsten 50% bullshi!
SMH...😬
We purchase the tungsten/copper hybrid metal for the original Heavy Tungsten Guide Rods from a US foundry in Carol Stream, IL.
@@glockstore Yeah..USA
always on b.o. but they take your $$$ ... scam co never buy from these cali rip off con man