LS Swap - Fuel System
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2024
- Join me as I figure out and install the fuel supply system for my 1981 Chevrolet Malibu G Body LS swap. Fuel tank, sender, connections and fittings. High pressure fuel injection hose etc. Budget friendly, but still good quality. This information can be used for any LS Swap.
Parts include;
Grand National fuel tank with baffle
Aeromotive Stealth fuel pump
Spectra Fuel Sender
Wix Fuel pressure regulator filter
Amazon fittings and connections
*New*
Buy me a Coffee and keep me fueled!
www.buymeacoffee.com/slowcarfix - ยานยนต์และพาหนะ
Great work Ed! Love all of your videos, I really liked the explanation of the pieces before seeing the assembly. That is something that took all of the guess work out of it.
Thanks Chris, I'm glad you enjoyed and are actually getting something from it. The goal is to show what I'm working on and hopefully it helps other people.
Great job thanks for the demonstration of the install. As for the double clamps to secure the lines, just use two of your clamps & butterfly them together
Thanks for watching and thanks for the comment.
Great video man. Your setup is almost the same way I did my 69 Chevelle. With the exception of the in-tank fuel pump, I drilled big holes in the bottom of my tank and welded on a bottom sump(Kenda triangular shaped) with two 1/2" bungs and an inline pump.
I used to have a sump on this car, and an in line pump for a SBC, but I wanted it quiet this time. I am doing a similar set up to this on my 57 truck very soon.
@@SlowCarFixlater on, after everything is sorted out, I might try to cut open my original tank and try to put some sort of baffles and a sump inside of it. The online pump is fairly loud, and I'm (like you) really wanting to make it a driver car again.
Found your channel from watching Scot Rods You Tube magic, woke up 3 AM thinking about my C10 build watch your vid , a coffee and back to the garage. Thanks for videos
Great! I enjoy his videos, he doesn't live terribly far, I would like to meet up with him some time. Glad you enjoyed the video, and keep working on your C10! Hopefully you could take something away from some of the stuff I'm working through. I'm no expert, but I'm getting stuff done and learning along the way. Thanks for watching!
You actually was the first person to explain in detail what's what on the fuel system thank you 🙏 but how did you get the line from the engine to the filter to go in to the filter do it just pop in
it's a "quick connect" fitting that pushes on the fuel rail, just like the other ones I used on the fuel pressure regulator etc.
Great video. Did you use all the “stock” wires that came with the GN sending unit? The power and ground wires seem to thin to handle the demands of an aftermarket fuel pump. Also the pass through on top of sending unit. That’s all stock, just like when you bought it?
Yes, I used the wiring that came with the sender and connected it to the pump. No issues, and it's been a few years and lots of miles.
Thanks for the quick reply! I think im going to upgrade them anyway to be on the safe side. I’m using a Holley 340 LPH pump and they say in the instructions to use at least 12 gauge wire to connect to the pump.
I am ls swapping a 96 f350 with the 351w (has injectors already . Will I have to switch the pump ? Swapping a 5.3 in the truck
I'm not that familiar with Ford stuff, but you need 60psi to keep an LS happy. It doesn't matter what pump you use, as long as you get the correct fuel pressure and flow rate. Hope that helps.
What fuel sending unit did you use
Grand National sending unit.
Hey with the way your hoses are setup have u had any tank ventilation issues?
Thanks for asking. Absolutely zero issues. Several thousand miles on it now.
Question about the color of the wires on the sending unit. I know the black needs to be grounded to chassis but the purple and grey wire not sure. I have a 85 Chevy Caprice Classic that wasn't fuel injection that has the 1 wire at the tank. I bought the Fg10 f spectra sending with a PSI harness. Just need to know where to run those other two wires
Grey wire is pump power, purple is the sender.
Thank you, so that I understand you correctly grey wire goes to relay power and purple is connected to sender, there's a single red wire that I unplugged from my tank do I have to tie into that wire and run it to the relay provided on the harness. Sorry for all the questions I just don't want to mess things up because it's my first swap and TH-cam is helpful but no one really go into detail about exactly where each wire goes. Thx again...
@@Berryhill42 I'm not sure about the red. I'd have to see it. Yes, the grey should go to the relay that feeds your fuel pump and purple to the factory sender wire.
@@SlowCarFix the red wire on my original setup which had a mechanical fuel pump was the wire to let you know how much gas was in the tank. The original sending had just 2 wires black ground and red fuel level wire. The sending unit and tank I have is set-up for 1986-90 Chevy Caprice Classic FG10F which has 3 wires, a black ground, grey to the sender and my question does the purple wire go to the relay that was provided with the LS swap harness
@@Berryhill42 On the one I used, purple was the sender. So that would go to your red wire (if that's your factory sender) The grey was power to the electric fuel pump.
Which wires u use to make the floater work
Purple is for the sender
Hi just curious if you had to wire a fuel pump relay or just wired to the grey switched wire in harness? Thanks
No relay, I just wired it to the LS harness.
@@SlowCarFix thanks for the reply
Will that sending unit fit the 78 Malibu stock fuel tank? 🤔
sure it will, but you still need a baffled tank to run an in tank fuel pump properly. I recommend a grand national tank or fuel injected monte Carlo tank.
Ok, thanks.
I was wondering with the 1/4 return line did it cause any issues?
No issues. I have 8000+ kilometers on it with no issues at all.
@@SlowCarFix Thank you for the reply. Your show and tell couldn’t be any better.
@@shitlocks5464 I'm glad it helped. That makes it all worth while. I'm going to have to review my notes and watch my video again soon as I'm putting a 6.0 in my 57 truck.
Did you use the factory sending unit with the fuel pump or did you use a efi sending unit ? Thanks
I explain in the video, with part numbers. It's a grand national sending unit which is fuel injected.
@@SlowCarFix ok thank you
@@badss87-67 no problem. best of luck.
Does the baffle in the gas tank basically look like a dog bowl ? I got my new tank in and just wondering if it’s the right one thanks
I believe it did, if you can't see the bottom of the tank through the sender hole, it's likely a baffled tank.
Same question I had? No bowl in the new tank. I don’t think I seen any baffles inside new one either?
Hey, I’m doing a 5.3 vortec swap into a 1972 Caprice.... do I need to change anything with the fuel system or can I just run it with the factory unit.
yes you need to change everything, it's a good part of the job. You need an electric pump, regulator, high pressure line etc. Pretty much everything I describe in this video. It's not hard but takes time.
@@SlowCarFix okay. Thanks. Any brand recommendations?
@@gorillabuiltcustomz5449 I used a aeromotive stealth pump and the lines I bought local. Fittings are all from Amazon and the fuel pressure regulator is stock C5 Corvette
@@SlowCarFix I appreciate It brother
Why did you use a zip tie to secure the pump to the sending unit? Hose clamp would have been better, zip tie will get brittle in fuel over time.
Didn't think of it, I'll let you know if it fails.
what lph pump is that? had any problems running that setup?
I can't remember off the top of my head, but I go through all the part numbers in the video. I have had no issues with this set up so far.
@@SlowCarFix its a 340lph pump. The reason I asked is because a lot of people say don't run anything bigger than a 255lph pump for the 33737 filter/regulator. Just seeing if that is a myth, or justifiable.
@@claytonhaske It's good you checked. So far no issues. What are the common issues with that pump and stock regulator? When I researched I didn't see any issues. I thought it is a common set up.
@@SlowCarFix Note: The C5 Filter/Regulator is capable of flowing a maximum of 255LPH. Beyond that amount, there is the potential for fuel pressure creep as the flow rate can overwhelm the internal regulator.
This is in the description from a c5 regulator from ebay, ill see if I can find anything like that for a wix specific regulator
@@SlowCarFix 233883533751 thats the ebay part number
What engine are you running
Gen IV 5.3L LS. Check out my other videos, I've documented the process. Thanks for watching
@@SlowCarFix the reason I asked because I see the computer you are using and that's the same one I got when I pulled my engine out and didn't know if I could that style computer
it works!
@@SlowCarFix thanks
Long or short either way OK with me
Great! I appreciate the input. I'm just trying to show what I'm working on without boring people to death.
Can you give the Amazon part # for all the fittings please