We had a bunch of different Massey-Ferguson tractors on our dairy farm in Ontario, Canada; but, the MF165 was my favourite, and I spent countless hours on it. My Dad purchased it new in 1971, I remember it being offloaded the day they brought it out to our farm, I was 10 years old. My Dad purchased it without the Multi-Power because he heard that feature had problems; subsequent tractors we owned had that feature and it worked fine. I suspect farmers were shifting the Multi-Power without using the clutch, when you did that the tractor lurched and I'll bet it was hard on it. Our MF1080 tractor had Multi-Power, I always used the clutch when I put it in "High" and it worked perfectly, never had a problem, and it was a great feature to have. We never owned the MF1155; but, we did have the MF1105 with air conditioning. People only had problems with the hydraulics on these tractors when they blew a hose to an implement, like a cultivator, or disc. The low oil in the hydraulic system then caused the failure, if you didn't top up the hydraulic oil like smart people should do. We had two such occurrences, one with the cultivator, the other with the disc, we immediately topped up the hydraulic oil before moving the tractor (and replaced the bad hose), and we never had a problem! My Dad was a smart man, he could fix anything, and I miss him very much.
That brings back memories from the ‘70’s! Put a lot of hours on an 1135 and an 1155. Good pulling power, fuel efficient and simple to service. Thanks for this.
I appreciate your videos. I cut my teeth on Massey Fergusons. My neighbor always told me this, "There is only one thing better than a Massey Ferguson and that is two of them!" My neighbor had a couple of 135's, a 175, a 255, a 1100, a 1150, a 1155 and the big 2805. It was a good time back then.
I operated an 1155 like this in 1973 - brand new - in west Texas, plowing dry-land cotton. Thought I was in heaven...inside a cab where I didn't have to breath the clouds of dirt. Got paid a whopping $22 a week.
WOW That's awesome you made 22pr hrs weekly and got to work in an awesome tractor to boot. I inherited my dad's 1150 V8 MASSEY FERGUSON about a 70 model I'm going to restore her to like new condition because I don't have a whole lot of money to restore to brand new condition. However she'll look real nice though. Anyway HAPPY NEW YEAR
Thank you for a great video of the ultimate Massey 1135, I was literally squirming on my seat willing that old girl to start. Well done, thoroughly enjoyed it.
Bloody marvelous ! What a beast ! That's easily my favorite in your collection, JT. Congrats on this one ! I only have seen one once over here in Europe. I was dumpstruck by this engine. The sound is just glorious.
My Uncle had a 1155, that thing had all kinds of power. It would pull anything and seemed like it could pull a house down. I saw it plow and didn't even struggle pulling a 4 bottom plow. used it to pull out a stuck combine. just an awesome tractor.
A tip for cold starts put the throttle full open go around to the right side of the engine and reach in on the fuel injection pump and find the fuel enrichment button and trip it. Now she will start much easier..
This was me 5 months ago when I bought my 255 massey it got parked in the bush for 15 years becuse it needed a clucth I put fresh fuel and battery in it and it rolled over about 8 times and the way it went and drove it home 10 miles did clucth and paint job and its one of the best tractors on my farm
Very Happy to see you had a new video up. You are always very entertaining and informative. Those V8 Perkins were horsepower monsters and that one sounds great. Looking forward to the next installment. Thank You JT.
Two thumbs 👍! Man those old Masseys were probably good , but I wouldn't have any idea how to work on them. I really never knew why the Perkins Engines gave trouble. They were good engines overall. Thanks for sharing.
I love masy Ferguson . It's always been one of my favorites. The 1155 just cool tractor the motor sounds good. Be fun to watch you get this back to work. Great video.
Welcome back, missed your videos and she's a beaut. It will be fun watching her transformation! I just picked up a new piece of red iron myself. I know have an 880 4furrow to go on the back of my 1085. Just got to get the corn off and try her out!!
She's got to come apart ... spent too many years driving one of those as well as 1100 , 1135 and various Internationals ,probably put a 100,000 miles on tractor ... Growing up on a farm will do that to ya...
Nice! Glad to see you again. I finished my IH 986, now you’re making me think about rebuilding another tractor! Great job JT thanks for sharing your endeavors
My 185 row crop still works . My hydrolics need working on as well . They still work just ever once in a while they will quit . My only wish is it has a Perkins instead of the Continental engine however it's easy to get started in the cold.
I was a Massey Ferguson mechanic in the late ‘70’s. Loved the CAV injector pumps. I could turn up the fuel delivery and get extra horsepower out of those old babies. 1135 and 1155 were great work horses.
@@jtsbarnngrill6873 Would be nice to have a lot of things wouldn't it, but some times you make do with what you have. I wish you well with this beast. Hope it all simple things to fix.
Subscribed! I love Massey's I only have a industrial 20 loader Massey but I also put a perkins t6.354.4 in my 85 c30 chevy with a 5x3 trans. I have a shorts video of me running though some of the gears on my channel the perkins sounds so good now I just gotta find a Massey 1130 to haul behind it
We have 2 of them 1 on daul straight pipes and the other with a single pipe are they are freaking loud when we're using them 1 on a bale grinder and the on stock chopper and they do have alot of power
We had a smaller MF and the farm down the road had a 1155 both had good engines but ours and theirs had lousy 3 point hitch lift problems. They gave up on using their 3 point hitch pulling a chisel plow and we just sold ours to get a JD with their simple 3 point hitch draft.
A few things to mention, the electric fuel pump is definitely not factory, the switch to hold until the tractor runs is most likely a Murphy switch (engine protection system) that too is not factory. The source of coolant in the oil might the oil cooler.
Looks like a pretty decent looking 1155, the tin work looks really straight. I’m sure a good work out would make it run even better. Years ago I had a 2805 Massey with the 640 Perkins, it was a horse when running, a little hard to start when cold. Our 2805 had the Rotary CAV Pump, not the in-line Bosch. I’m a Michigan Guy as well, you need a sense of humor to live in this state, just for the weather.
@@jtsbarnngrill6873 mine had the straight 8 speed, no power shift. Didn’t have any transmission problems. AC was hard to keep running. We got rid of it in the late 90’s early 2000.
The last 540 we rebuilt we had to put the used crank bearings back in parts came from England and all over god’s creation. We only planted with that tractor another year before upgrading 40 years to something with auto steer. It’s a good looking 1155.
I’ve been subscribed for a while now (I think the Steiger series was when I subscribed) finally got the chance to go back and watch some of your older videos. Baffles me how you don’t have 100k sub yet but I know you’ll get there, good stuff for sure. What is your background? Is it just farming or are you a mechanic? You definitely have a broad skill set.
I appreciate that! I’ve dabbled in a little of everything, grew up farming, 20 years of auto parts and paint, and back to an ag related 9/5 job with my own hobby farm tossed in the mix. Been reviving old tractors for several years now and thought others would enjoy watching what I enjoy doing!
Once upon a time when these tractors weren't antiques, I drove around an MF 1155 that had broken in half at the clutch housing when it was coming out of a field. Stranded on the edge of a two lane black top road blocking traffic. I have no idea what caused the split other than it was not because of a vehicle hitting the tractor. I've always wondered if these tractors had an unstated weakness in the frame.
I have an 1155 here in Laredo Tx tractor is a beast!👌
We had a bunch of different Massey-Ferguson tractors on our dairy farm in Ontario, Canada; but, the MF165 was my favourite, and I spent countless hours on it. My Dad purchased it new in 1971, I remember it being offloaded the day they brought it out to our farm, I was 10 years old. My Dad purchased it without the Multi-Power because he heard that feature had problems; subsequent tractors we owned had that feature and it worked fine. I suspect farmers were shifting the Multi-Power without using the clutch, when you did that the tractor lurched and I'll bet it was hard on it. Our MF1080 tractor had Multi-Power, I always used the clutch when I put it in "High" and it worked perfectly, never had a problem, and it was a great feature to have. We never owned the MF1155; but, we did have the MF1105 with air conditioning. People only had problems with the hydraulics on these tractors when they blew a hose to an implement, like a cultivator, or disc. The low oil in the hydraulic system then caused the failure, if you didn't top up the hydraulic oil like smart people should do. We had two such occurrences, one with the cultivator, the other with the disc, we immediately topped up the hydraulic oil before moving the tractor (and replaced the bad hose), and we never had a problem! My Dad was a smart man, he could fix anything, and I miss him very much.
Good to have you back friend keep the great videos coming friend from Scotland.
That brings back memories from the ‘70’s! Put a lot of hours on an 1135 and an 1155. Good pulling power, fuel efficient and simple to service. Thanks for this.
I appreciate your videos. I cut my teeth on Massey Fergusons. My neighbor always told me this, "There is only one thing better than a Massey Ferguson and that is two of them!" My neighbor had a couple of 135's, a 175, a 255, a 1100, a 1150, a 1155 and the big 2805. It was a good time back then.
Amazing clean concrete floor for a mechanics barn!
Love those Massey's and their Perkins engines!
I operated an 1155 like this in 1973 - brand new - in west Texas, plowing dry-land cotton. Thought I was in heaven...inside a cab where I didn't have to breath the clouds of dirt. Got paid a whopping $22 a week.
How many girlfriends
Ford was paying $5 a day in 1928.
Were you out there in all that red dirt cotton area?
WOW That's awesome you made 22pr hrs weekly and got to work in an awesome tractor to boot. I inherited my dad's 1150 V8 MASSEY FERGUSON about a 70 model I'm going to restore her to like new condition because I don't have a whole lot of money to restore to brand new condition. However she'll look real nice though. Anyway HAPPY NEW YEAR
These old videos just want you to crack a beer.
Yup, job done.
Cheers.
🍺
Neighbor has a 1155 thats hydrolocked I'd love to rebuild but like you said, parts availability is....yeah
I had an 1155 for about 10 years. Great pulling tractor. This will be a fun restore to watch.
Impressive job by JT on this one!🙂
My dad's best friend had this same one..best of the best in the 1970 80s..
Great video!
The beast is alive!!!!
I love all things massey ferguson!!
Nice looking 1155,thanks for sharing,kudos to you for taking on this tractor
Welcome back,,you and your videos have been missed.Looks like a good old tractor,can't wait for the video series of it's rebuild.
My dad had 1155 when i was a kid , just found your channel great stuff
Great job fellow michigander
Love Fluffy the cat!
Love those old Massey Ferguson’s
Good to see youback. You have a beast on yr hands. We don't see many tractors like that in the uk
Neighbor years ago stuck a 6,71 Detroit in one of these when his locked up . Said he'd never do it again but his is still going 25 years later
Thank you for a great video of the ultimate Massey 1135, I was literally squirming on my seat willing that old girl to start. Well done, thoroughly enjoyed it.
Bloody marvelous ! What a beast ! That's easily my favorite in your collection, JT. Congrats on this one ! I only have seen one once over here in Europe. I was dumpstruck by this engine. The sound is just glorious.
Entertaining as always. Good luck with your new project 😻
My Uncle had a 1155, that thing had all kinds of power. It would pull anything and seemed like it could pull a house down. I saw it plow and didn't even struggle pulling a 4 bottom plow. used it to pull out a stuck combine. just an awesome tractor.
A tip for cold starts put the throttle full open go around to the right side of the engine and reach in on the fuel injection pump and find the fuel enrichment button and trip it. Now she will start much easier..
This was me 5 months ago when I bought my 255 massey it got parked in the bush for 15 years becuse it needed a clucth I put fresh fuel and battery in it and it rolled over about 8 times and the way it went and drove it home 10 miles did clucth and paint job and its one of the best tractors on my farm
The 255 is an excellent tractor!
@@jtsbarnngrill6873 I can't agree more I got a tractors the 255 is one of my favorites but my 500 belarus is the best tractor I ever owned
"new glorious piece of shit"... I could latch on to this lol...
Glad see u back thats a sharp tractor luv it
Nice straight looking tractor
That's a big engine for a tractor!, love the twin exhausts and seeing the caps in action!
Very Happy to see you had a new video up. You are always very entertaining and informative. Those V8 Perkins were horsepower monsters and that one sounds great. Looking forward to the next installment. Thank You JT.
Frank Perkins son migrated here in New Zealand. He was my property valuer.
It brings back memories from the 70this to see a 1155 getting resareacted back to life
Awesome tractor - great video...👍
Two thumbs 👍! Man those old Masseys were probably good , but I wouldn't have any idea how to work on them. I really never knew why the Perkins Engines gave trouble. They were good engines overall. Thanks for sharing.
I love masy Ferguson . It's always been one of my favorites. The 1155 just cool tractor the motor sounds good. Be fun to watch you get this back to work. Great video.
I had a 1155 and didn't use Massey hydraulic transmission fluid. Took out the multi power. Make sure you use Massey oil
Brilliant content in all the videos . INTERESTING , INTUIATIVE , Just gripping content .
Looking forward to see how this beast comes along
Had one those girls in the 90’s ! Sold because it got brake dust, shavings In the hydraulic oil . Enjoyed watching JT
I got a Massey 65 1963 diesel and a 285 1982. Love both of them. My dads 275 he added a separate oil cooler radiator for the power steering
Nice to see youre alive and well
Just found this channel I LOVE Massey Ferguson currently have a 275 in pieces and a 230 Gas that is functional
sick duals!
Easy to follow fix congradulations😊
Merry Christmas back to you and your family
Awesome, thank you for sharing👍🦾 !!!!!
That was great enjoyed it very muchrunns like a semi.
She sounds good. Hello from Sweden 😊
Welcome back, missed your videos and she's a beaut. It will be fun watching her transformation! I just picked up a new piece of red iron myself. I know have an 880 4furrow to go on the back of my 1085. Just got to get the corn off and try her out!!
Good deal! Hope she works good for you!
She's got to come apart ... spent too many years driving one of those as well as 1100 , 1135 and various Internationals ,probably put a 100,000 miles on tractor ... Growing up on a farm will do that to ya...
Good job. Little work and I believe you will have good tractor. Sounds good. Look forward to the next video.
Thanks! I’m looking forward to this one too. It’s a pretty nice tractor, hopefully I can get all the bugs worked out
I had a Cummins 555 V8 had pin hole in liner below ring area let antifreeze in oil .
A block heater electrolysis ate a hole in liner..
Nice looking tractor JT👍
Thank you! It will get even better!
Nice machine 👍
That’s a nice tractor i like it👍
Thanks for the memories
Nice! Glad to see you again. I finished my IH 986, now you’re making me think about rebuilding another tractor! Great job JT thanks for sharing your endeavors
Nothing beats a good challenge and the feeling of accomplishment when you finish one
👍glad you’re doing well.
That think is fuckn mint bud love the dual stacks and the clappers
Right on! Thanks!
My 185 row crop still works . My hydrolics need working on as well . They still work just ever once in a while they will quit . My only wish is it has a Perkins instead of the Continental engine however it's easy to get started in the cold.
Awesome I have 1105 massey myself but hard to beat the sound of v8👍
That was really great to watch, love those old big tractors, where could I get one
Cool, awesome video
I was a Massey Ferguson mechanic in the late ‘70’s. Loved the CAV injector pumps. I could turn up the fuel delivery and get extra horsepower out of those old babies. 1135 and 1155 were great work horses.
Amazing story 😊
Pull the injectors out fill the radiator and pressurize the cooling system and see which cyl.. fills up 👍👍👍
Head gasket
Digging the equipment, especially the grain truck in the background!
there is a few videos of the revival and restoration on that truck on my channel 😉
@@jtsbarnngrill6873 Nice!
Nice find man I'm jealous
Greetings from central Michigan
U got a good sounding tractor
Love the 165
I would bypass that oil cooler just to eliminate it being a possibility of your coolant intrusion
This is gonna be awesome
Hey stranger good to see ya !
Nice score and Win!!
Atb john
Thank you!
Enjoyed the video! Wouldn’t it be nice to occasionally have a helper…steer a tractor, spray ether or hook a chain. Keep up the good work!
Indeed it would! Nothing like running a one man band lol
@@jtsbarnngrill6873 Would be nice to have a lot of things wouldn't it, but some times you make do with what you have. I wish you well with this beast. Hope it all simple things to fix.
You need your bride to help 😅
Subscribed! I love Massey's I only have a industrial 20 loader Massey but I also put a perkins t6.354.4 in my 85 c30 chevy with a 5x3 trans. I have a shorts video of me running though some of the gears on my channel the perkins sounds so good now I just gotta find a Massey 1130 to haul behind it
Nice tractor
Nice interesting video, I have a 1155, she pulls well. It could be the oil cooler also that’s letting antifreeze into the block.
I think that’s my culprit
Hey this is Steve with Arnett Tractor we have 1155 in our salvage yard is a good running engine
I’ll keep that in mind just in case. Thank you!
We have 2 of them 1 on daul straight pipes and the other with a single pipe are they are freaking loud when we're using them 1 on a bale grinder and the on stock chopper and they do have alot of power
Bravo, Sir! Bravo!!
We had a smaller MF and the farm down the road had a 1155 both had good engines but ours and theirs had lousy 3 point hitch lift problems. They gave up on using their 3 point hitch pulling a chisel plow and we just sold ours to get a JD with their simple 3 point hitch draft.
SHE Answered You back when you said "PURR"!
Head gasket can cause oil on water to mix together
If I recall, the water pump bolts onto the aluminum timing case. They can corrode a pinhole through the case and put antifreeze in the base.
I will keep that in mind. Thank you!
Don't forget the coolant.
What a shame I knew where one of these were sitting long enough the trees grew up around it over here in Kansas ☹️
I have a 1135 with hydraulic problems, I'm not exactly sure what the problem is so I'll tune in to see how you get on with this one.
man good work
A few things to mention, the electric fuel pump is definitely not factory, the switch to hold until the tractor runs is most likely a Murphy switch (engine protection system) that too is not factory.
The source of coolant in the oil might the oil cooler.
The splitsecond I saw the words will it start, I knew it would🤠
Looks like a pretty decent looking 1155, the tin work looks really straight. I’m sure a good work out would make it run even better.
Years ago I had a 2805 Massey with the 640 Perkins, it was a horse when running, a little hard to start when cold. Our 2805 had the Rotary CAV Pump, not the in-line Bosch.
I’m a Michigan Guy as well, you need a sense of humor to live in this state, just for the weather.
That’s the truth! I wouldn’t mind a 2805 with a straight 8 speed, but that’s a unicorn lol.
@@jtsbarnngrill6873 mine had the straight 8 speed, no power shift. Didn’t have any transmission problems. AC was hard to keep running. We got rid of it in the late 90’s early 2000.
The last 540 we rebuilt we had to put the used crank bearings back in parts came from England and all over god’s creation. We only planted with that tractor another year before upgrading 40 years to something with auto steer. It’s a good looking 1155.
I’ve been subscribed for a while now (I think the Steiger series was when I subscribed) finally got the chance to go back and watch some of your older videos. Baffles me how you don’t have 100k sub yet but I know you’ll get there, good stuff for sure. What is your background? Is it just farming or are you a mechanic? You definitely have a broad skill set.
I appreciate that! I’ve dabbled in a little of everything, grew up farming, 20 years of auto parts and paint, and back to an ag related 9/5 job with my own hobby farm tossed in the mix. Been reviving old tractors for several years now and thought others would enjoy watching what I enjoy doing!
I’ve always like that tractor it’s because the V8 Engine, please take the time to fix it up. Enjoy Grace and peace.
Awesome
Once upon a time when these tractors weren't antiques, I drove around an MF 1155 that had broken in half at the clutch housing when it was coming out of a field. Stranded on the edge of a two lane black top road blocking traffic. I have no idea what caused the split other than it was not because of a vehicle hitting the tractor. I've always wondered if these tractors had an unstated weakness in the frame.
No frame on mf
How many hrs did it have? If you pulling with it and do wheelies and slams back on the ground yes, that's hard on the casting