I'm glad it was helpful and thank you for the kind comment. I hope all goes well if you are going to perform this! Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for watching!
Nicely done video! And it IS as easy as you show it to be. I had to do a transplant recently on my 13 year old YS4500 20hp Intek Gold that's done everything but cut grass over it's lifetime. Weeds... lots of southern NM weeds on a dirt acre - clay & stones - & moving 200 yards of fill dirt, year round. In other words, lots of abuse. Tough machine. You mentioned weight - my 1900EX replacement is listed at 77 pounds. Lost that decompression lever as well but mine took everything w/ it at mow speed. Not one thing was spared except for, oddly enough, the governor. Thrown rod, cracked counter-balance, too much to mention. Like a mini-grenade went off in it. One thing I've always done w/ fuel lines was pinch them off like you but then plug w/ a bolt and remove the pincher until ready to re-install. On these an exhaust flange bolt fits nicely. Again, great video. Should be the #1 'how-to' for those needing it! Clear, concise, thorough.
I’m glad it was helpful and thank you for the kind words. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:) Thank you for watching
I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
Hi James, I'm glad it was helpful. Thank you for commenting, Please give this video a thumbs up, subscribe and tell your friends to help my channel. It would be greatly appreciated.
NIce job; I just finished a 23 hp engine in my shop, same issue. Cam compression release is broken. Briggs has lots of them that break. Also I find many of the quick oil change plugs loose and leaking. Now I keep a new spare in inventory. Replace them or use red locktight on them after cleaning really good with break clean or carb spray. Thanks for excellent video.
Thank you. Just take you time and you will be fine. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching
Hi Larry, I’m glad this video was helpful and thank you for the kind comment Please give this video a like to help the channel. It would be greatly appreciated.
I’m glad it was helpful. Thank you for watching and the kind comment. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated!
Excellent vid, thank you. If you don't have an impact wrench, do you have any tips on how to keep the main pulley from turning while trying to loosen it's nut? Thank you.
Pipe wrench between the pulleys. Borrow or purchase a electric impact. It is a good investment if you do all your repairs. Make getting blades on and off easy too!
Hi Jeffrey, I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Thanks, I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly helpful. Thank you for watching:)
Thanks, I’m glad it was helpful, Please give this a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
Thank you! and for the kind comment! Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated
It should be similar but I can’t say without looking as I do not remember from one to another. I think the transmissions may be different so the belt may be different coming off the front engine pulley. As far as the mounting engine on frame it should be the same. Muffler may also be different. Let me know how you make out.
Looks like the tractor doesn’t have more than 50 hours on it. These are over $2000 as of 12/2023. That’s crazy money for what used to be a $900 tractor 4 short years ago.
95% of all my videos the machines look that good. I clean them before the video. This one was a defective cam from Briggs and Stratton. That can happen at any given moment. I think this was 4 years old.
Should get the best video award. Thank you for a great one.
Thank you fir the kind words and I’m glad this video was helpful. Please subscribe and tell your friends to help my channel grow:)
Amazing detail. Like I was at Craftsman school. Thanks for taking the time to do this...
I'm glad it was helpful and thank you for the kind comment. I hope all goes well if you are going to perform this! Please give this video a like and share my channel to help it grow. It would be greatly appreciated! Thank you for watching!
Nicely done video! And it IS as easy as you show it to be. I had to do a transplant recently on my 13 year old YS4500 20hp Intek Gold that's done everything but cut grass over it's lifetime. Weeds... lots of southern NM weeds on a dirt acre - clay & stones - & moving 200 yards of fill dirt, year round. In other words, lots of abuse. Tough machine. You mentioned weight - my 1900EX replacement is listed at 77 pounds.
Lost that decompression lever as well but mine took everything w/ it at mow speed. Not one thing was spared except for, oddly enough, the governor. Thrown rod, cracked counter-balance, too much to mention. Like a mini-grenade went off in it.
One thing I've always done w/ fuel lines was pinch them off like you but then plug w/ a bolt and remove the pincher until ready to re-install. On these an exhaust flange bolt fits nicely.
Again, great video. Should be the #1 'how-to' for those needing it! Clear, concise, thorough.
I’m glad it was helpful and thank you for the kind words. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:) Thank you for watching
this video great ! It moves right along but still has detail and explanations. Great camera work as well
I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
@@JohnsonsSmallEngines Hola!! Amigo me gustan Tus videos por que generalmente ordenas en TU mesa de trabajo todas las herramientas.( Tools)
Great video. This guy's so talented he can remove the engine one handed.
Excellent Video! No nonsense, detail oriented. I will be taking my engine off soon Will keep this video on hand for reference.
Hi James, I'm glad it was helpful. Thank you for commenting, Please give this video a thumbs up, subscribe and tell your friends to help my channel. It would be greatly appreciated.
NIce job; I just finished a 23 hp engine in my shop, same issue. Cam compression release is broken. Briggs has lots of them that break. Also I find many of the quick oil change plugs loose and leaking. Now I keep a new spare in inventory. Replace them or use red locktight on them after cleaning really good with break clean or carb spray. Thanks for excellent video.
Thank you for watching!
Excellent video - I’m now ready to walk over to my garage and hopefully do the same. Thanks for sharing !
Thank you. Just take you time and you will be fine. Please give this video a like and share my channel to help it grow. It would be greatly appreciated. Thank you for watching
Great video...very well explained from start to finish!
Hi Larry, I’m glad this video was helpful and thank you for the kind comment Please give this video a like to help the channel. It would be greatly appreciated.
Thank you this video made the job easy
I’m glad it was helpful. Thank you for watching and the kind comment. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated!
Excellent vid, thank you. If you don't have an impact wrench, do you have any tips on how to keep the main pulley from turning while trying to loosen it's nut? Thank you.
Pipe wrench between the pulleys. Borrow or purchase a electric impact. It is a good investment if you do all your repairs. Make getting blades on and off easy too!
Did the 3/28/19 Brad part come from the factory?! 😁
Another great video. I guess you have to trust that chain hoist with your life.
Not sure what you meant 3/28/19? I love my chain hoist!! Thanks for watching!
Excellent detail.
Thank you and thanks for for watching:)
Great video.
Thank you, I’m glad it was helpful:)
wow down to every detail.. I was impress... well done will subscribe.
I’m. Glad this video was helpful. Thank you for supporting the channel to help it grow!
Very good . Thank you
Hi Jeffrey, I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Great video
Thanks you :) I'm glad it was helpful. Please give it a thumps up and tell your friends to help my channel grow. It would be greatly appreciated.
Thsnks for the video! The bolt holding the pully on, is it counter clockwise to remove?
If you’re talking about the engine pulley? The bolt comes off counterclockwise and on is clockwise.
They have a well built deck
This video is excellent
Thanks, I’m glad it was helpful. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly helpful. Thank you for watching:)
Exelent video
Thanks, I’m glad it was helpful, Please give this a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
Where's the video on how to fix the cam on this engine?
Need a video to pull the pistn out of a 22 hp kohler courage engine sv620-0018
Nice clean video! I've got a t1400 with 17.5 motor, do you know if I could replace it with a bigger motor without any modification? Thanks in advance
I'm sure it can be done but I cannot say what will and won't fit.
@@JohnsonsSmallEngines thanks much
Well Done
Thank you! and for the kind comment! Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated
Suggestion Brad; how about removal of a Craftsman/MTD snow blower engine.
Hi Justin, It is very rare that I ever need to remove a engine from a snow thrower. If I get one in that needs a replacement, I’ll d a video on it.
@@JohnsonsSmallEngines I just bought a new 208cc MTD replacement engine for $99 from Brand New Engines. Plan on parting it out for spares.
Did you ever do the one on the bad cam?
Not yet. It's a little more involved then most want to tackle and I only come across it every now and then.
Waiting for the cam video!
Possibly by end of the week
is the engine removal the same as the craftsman t130
It should be similar but I can’t say without looking as I do not remember from one to another. I think the transmissions may be different so the belt may be different coming off the front engine pulley. As far as the mounting engine on frame it should be the same. Muffler may also be different. Let me know how you make out.
@@JohnsonsSmallEngines 10-4
Looks like the tractor doesn’t have more than 50 hours on it. These are over $2000 as of 12/2023. That’s crazy money for what used to be a $900 tractor 4 short years ago.
95% of all my videos the machines look that good. I clean them before the video. This one was a defective cam from Briggs and Stratton. That can happen at any given moment. I think this was 4 years old.
👍👍