ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to CUT DOWN (shorten) your own golf clubs AT HOME
ฝัง
- เผยแพร่เมื่อ 24 มิ.ย. 2021
- In this video I show how easy it is to cut down your own golf clubs at home if you feel that your clubs are too long for you. You only need the minimal amount of tools and no more than 5 minutes for each one. You might be surprised at how easy it is even for anyone that wouldn't know where to even start.
------------------
⛳️ What i used in this video;
🏌️♂️ White Spirit: amzn.to/3xIjlKj
🏌️♂️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
🏌️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️ Mini Hacksaw:
amzn.to/3d3WOQo
⛳️ What i use for all of my golf club repairs;
🏌️ Golf Grip Cutting Tool:
amzn.to/3d5I3fJ
🏌️ Golf Grip Remover Rod:
amzn.to/3zOZ8V6
🏌️ Double Sided Tape:
amzn.to/3zJXd4h
🏌️ Mini Hacksaw:
amzn.to/3d3WOQo
🏌️ 2 part epoxy glue:
amzn.to/2SkHnw1
🏌️ Mini Shaft Cutter:
amzn.to/3xKlsgU
🏌️ Double Sided Shaft extension for steel:
amzn.to/3zRWVrR
🏌️ Single Shaft extensions for graphite:
amzn.to/3xEiABS
🏌️ Full set of shaft extensions for graphite:
amzn.to/3d5ezPg
🏌️ White Spirit:
amzn.to/3xIjlKj
🏌️ Golf Gripping Solvent (Like white spirit but the proper stuff for regripping, a bit more expensive but it doesn't smell):
amzn.to/3zR9l3a
-------------------
📲 follow me on Instagram;
lukehanlongolf
------------------
📹 Related Videos;
🎯 How to re-grip your own golf clubs at home - • HOW to RE-GRIP a GOLF ...
🎯 How to lengthen your own golf clubs at home - • How to EXTEND your Gol...
🎯 How to remove your golf club grip at home - • How to REMOVE your own...
🎥 Related Playlist;
🚩 DIY Golf club repairs;
• DIY Club Repairs
-----------------
**Please note, i earn a tiny percentage of anything bought through the links in my description and that money will always be put back into making future content on my youtube video.
Thank you for your support on my channel 😎
Subscribe to play better golf 👀
#diygolfclubrepairs
Thanks for the video, greetings from Mexico 🇲🇽
I was looking to cut down my putter by about an inch and I was curious about the tool that was used. Thanks for the info.
No worries, hope it went well haha 👍
Milwaukee has a m12 pipe cutter. Would you use that?
Awesome tips! Thanks
Got banned from Instagram had to come subscribe 😢but glad I did
Have you tried taking jumbomax grips off?
Yes they’re an absolute pain but I was using a rod. I think if you used a syringe they’d be fairly straight forward
Problem is often times shaft butt end will deform as you tighten the cutter. It makes it difficult to cut it in straight line.
You're using too much pressure. Barley tighten the blade and do several rotations till it gets easy then repeat.
You have no idea what you’re talking about
Is removing 3 inches do-able?
It’s definitely do able you just might have to thicken up the shaft with tape or the grip won’t stick
Hi I've bought this cutter to do one of my wedges no way will it cut the steel
Hi if you keep going at it it should eventually get through it does take a while but will eventually do it
You can't be afraid of bending the butt end of the shaft. I started with a tiny bit of pressure, turned a few times, and adjusted the screw. Lather, rinse, repeat. The end of the shaft starts looking a bit like an oval, but then you find just the right amount of pressure for the wheel to cut, go around 5-6 more times, and you're done.
Those cutters are made for copper piping and thin steel tubing. It will 100% cut the shaft of a golf club no problem if you use it correctly.