Just and update we sent the tcm to www.ecuteam.com and they were able to repair the ecu so we could avoid buying and new one and having to program the new ecu since we don’t have the tools to program a new ecu. Installed the repaired ecu and truck fired up first try.
My name is Vic, please I need your help, my LR4 Discovery is not starting. It's been 2 weeks now my mechanic don't have a clue here in Africa. The system is detecting crankshaft sensor error. We tried fix another one but still it refusing to start. I am getting so frustrated with this. I need advice plsease!
Hi I've disco3 no start but when i put quick start everything is fine. I check the fuel pump is fine, fuel lines to the injectors fine, but seems like injectors are not opening. What could be the problem?
Hi, I have a 2004 Land Rover Range Rover and I did replace the engine after everything put together , engine won’t crank is there any way to reset the system
I am having a problem with the tcm of a 2008 range rover sport it says that there is little communication with the ECU can they help me if I let uj change a new TCM and where in the car do I get it
Hi Shotgun Diagnosis, I'm wondering if you could help me out on my channel. Bought a 2003 Range rover 4.4 as a project on my TH-cam channel. The old girl has a No Crank No Start issue. Previous owner says he went through a car wash, came out and got the issue. Previous owner has tried replacing the Starter Motor, Starter Relay, Transfer Box, New Battery, Auto electrician stated to him the transfer box is showing invalid selection. So far, I've tried. Cleaning Battery Terminals, Cleaning Alternator Earth, Cleaned Crank Sensor, Unplugged MAF Sensor, Checked under the car for loose connections, turned the car over by hand, check glove compartment fuses. Diagnostics from INPA and RSW AllComms, didn't show much that could cause the No Crank No Start issue. After clearing the codes the only odd thing that showed up was the Air Suspension CAN BUS fault came straight back but Air Suspension is still able to self level. Also the DSC warning light also is still on and wouldn't clear, I've attached a picture. Our next thoughts is to check all the modules for water ingress, including the ABS module and Sensor and replace the ignition switch. We've also got another diagnostics reader on the way specifically for Live data If anyone has any thoughts or advice, that would be greatly appreciated. Cheers
Hi Man Your Video is very inspiring. I am a new owner of a 2009 RR sport Supercharger. my problem started with the key fob battery dying but the car was still starting, days after the car battery died. I replaced the car battery and the car started a few times. i made a new key fob also and since then the car has not started either with the old key or the new key. I can turn the key to position 1,2 and I can hear the door locks clicking and flashing parking lights and flashing red light on the dashboard. i have read on several forums that it can be an immobilizer preventing the engine to start i also noticed that the check engine yellow light is no longer showing when the key is in position 1 and indication that there is no communication between the immobilizer control module and the engine control module. Any help to solve this RR mystery? I am desperate PLEASE HELP.
I am having this same issue!! And sometimes lights will stay on flashing when taking key out and take a while to stop and shut off dashboard did you end up solving the issue?
@@spectreorganics5747 Yes ! It was a loose ground and making it glitch and not start but now I’m facing a fuel pump problem and I must say this truck is a problem almost every few months even though I love it ! 😅
@@Angelo-zz8cb thanks for the update! Ahh I can only imagine lol. I finally figured out my key needed to be reprogrammed. Hopefully all I need now is a battery but I doubt it right lol
Hello, i have the same exact vehicle, i connected the wire to the negative battery pose and touched the yellow wire and it cranks right up.... so what part do i need to replace the pcm? just wanna make sure i buy the right part....is it the engine control module? i need the name of the part.
Hi i have same problem with v8 motor . Cant turn the key after baypass with blue wire key turning but still no crank 😊 after jumped 12v wire from battery to the black wire from the relay under the bonner behind the battery engine start and running . Air suspensio message on the dash . Any one know what is the solution? I will be appreciated for any info regarding to the problem. Thanks
T Carter there is a company that is rebuilding the tcm circuit board so we will not have to program it to the car, if we got a new tcm yes it would have to be programmed by the dealer. Im not sure what the companies name is but I’ll ask my boss and let you know.
thank you for making an easy step by step video...
great diagnosis
good work man
What type of meter are you using. What is th name brand and what is it called? Your making this easy. Thanks
Just and update we sent the tcm to www.ecuteam.com and they were able to repair the ecu so we could avoid buying and new one and having to program the new ecu since we don’t have the tools to program a new ecu. Installed the repaired ecu and truck fired up first try.
My name is Vic, please I need your help, my LR4 Discovery is not starting. It's been 2 weeks now my mechanic don't have a clue here in Africa. The system is detecting crankshaft sensor error. We tried fix another one but still it refusing to start. I am getting so frustrated with this. I need advice plsease!
I have the same problem with my truck now looking for answers
Hi I've disco3 no start but when i put quick start everything is fine. I check the fuel pump is fine, fuel lines to the injectors fine, but seems like injectors are not opening. What could be the problem?
Good bud very in def , lol cut 😂
Hi, I have a 2004 Land Rover Range Rover and I did replace the engine after everything put together , engine won’t crank is there any way to reset the system
I am having a problem with the tcm of a 2008 range rover sport it says that there is little communication with the ECU can they help me if I let uj change a new TCM and where in the car do I get it
any update on this?
I have questions
Hi Shotgun Diagnosis, I'm wondering if you could help me out on my channel.
Bought a 2003 Range rover 4.4 as a project on my TH-cam channel. The old girl has a No Crank No Start issue.
Previous owner says he went through a car wash, came out and got the issue.
Previous owner has tried replacing the Starter Motor, Starter Relay, Transfer Box, New Battery, Auto electrician stated to him the transfer box is showing invalid selection.
So far, I've tried. Cleaning Battery Terminals, Cleaning Alternator Earth, Cleaned Crank Sensor, Unplugged MAF Sensor, Checked under the car for loose connections, turned the car over by hand, check glove compartment fuses.
Diagnostics from INPA and RSW AllComms, didn't show much that could cause the No Crank No Start issue.
After clearing the codes the only odd thing that showed up was the Air Suspension CAN BUS fault came straight back but Air Suspension is still able to self level.
Also the DSC warning light also is still on and wouldn't clear, I've attached a picture.
Our next thoughts is to check all the modules for water ingress, including the ABS module and Sensor and replace the ignition switch.
We've also got another diagnostics reader on the way specifically for Live data
If anyone has any thoughts or advice, that would be greatly appreciated.
Cheers
Ever get it fixed?
Hi Man Your Video is very inspiring. I am a new owner of a 2009 RR sport Supercharger. my problem started with the key fob battery dying but the car was still starting, days after the car battery died. I replaced the car battery and the car started a few times. i made a new key fob also and since then the car has not started either with the old key or the new key. I can turn the key to position 1,2 and I can hear the door locks clicking and flashing parking lights and flashing red light on the dashboard. i have read on several forums that it can be an immobilizer preventing the engine to start i also noticed that the check engine yellow light is no longer showing when the key is in position 1 and indication that there is no communication between the immobilizer control module and the engine control module. Any help to solve this RR mystery? I am desperate PLEASE HELP.
I am having this same issue!! And sometimes lights will stay on flashing when taking key out and take a while to stop and shut off dashboard did you end up solving the issue?
@@Angelo-zz8cb ever figure it out?
@@spectreorganics5747 Yes ! It was a loose ground and making it glitch and not start but now I’m facing a fuel pump problem and I must say this truck is a problem almost every few months even though I love it ! 😅
@@Angelo-zz8cb thanks for the update! Ahh I can only imagine lol. I finally figured out my key needed to be reprogrammed. Hopefully all I need now is a battery but I doubt it right lol
@@spectreorganics5747 truck is a pain lol wishing you the best though man
Hello, i have the same exact vehicle, i connected the wire to the negative battery pose and touched the yellow wire and it cranks right up.... so what part do i need to replace the pcm? just wanna make sure i buy the right part....is it the engine control module? i need the name of the part.
TCM
Hi i have same problem with v8 motor . Cant turn the key after baypass with blue wire key turning but still no crank 😊 after jumped 12v wire from battery to the black wire from the relay under the bonner behind the battery engine start and running . Air suspensio message on the dash . Any one know what is the solution? I will be appreciated for any info regarding to the problem.
Thanks
What scanner is that
V8 ?
Of course
I thought u couldn’t replace the ecm I thought it had to be programmed to the car
T Carter there is a company that is rebuilding the tcm circuit board so we will not have to program it to the car, if we got a new tcm yes it would have to be programmed by the dealer. Im not sure what the companies name is but I’ll ask my boss and let you know.
Clear the computer it’s full of crap