Titan Roller J-Hooks (J-Cups) First Impressions
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Just got in the new Titan Rollers. Wanted to tell you my first initial impressions!
Get some here: bit.ly/2JSdcV1
Custom Roller Review: • Custom Rolling J-Cups ...
Ghost Roller Review: • Best Equipment You Don...
Save 10% off all Pioneer orders using code BASEMENT
generalleather...
Social Links:
Instagram: / basementbrandon
Twitter: / basementbrandon
Snapchat: BasementBrandon
brandoncampbellfitness@gmail.com
I just received a second set of these from Titan for my T-3. They are significantly better than the initial release in that; both roll freely, umhw plastic on all 3 inner surfaces, nut and bolt which protruded has been replaced by receeded hex bolt, better powder coat and “pop pin” hole is better aligned. I would say these are an absolute 5/5. Titan seems to be listening to reviewers.
Maybe explains why the price went up as well?
Damn Brandon do you read minds? I was just watching your roller cup reviews and read all the comments asking Titan to copy the idea. Here you are 20 mins later with this video. Wild.
Haha good timing
It took us 2+ years but we are glad to be pretty much all Rogue at this point. The inconsistency of other manufacturers products is fine when you are starting out, but I'd rather pay a little more for peace of mind at this point. Great video as always Brandon!
Right on!!
Wanted to note here I ordered the X3 version where I should have got the Titan version for my a Rogue RM 3, but the X3 actually fits fine. The pin it self is smaller than my a Rogue holes but because of twist knob, I can secure it tightly and is not loose when I bench or squat with these. So far love them!
Nice!!
I bought my set and get them yesterday. I use them today and they work perfectly. Both rollers work. It fit the upright (3x3) nicely and I find the lip not as big as people seems to see them. In any case for $62 is great
They are available for a 3x3???
@@prestonrichardson7894 the one I bought is for the x3 so is a 3x3
appreciate the feedback!
@@prestonrichardson7894 DIMENSIONS: The T-3 Series Roll J-Hooks provide a combined weight capacity of 2,000 pounds. The design allows for quick adjustments to any T-3 Series Power Rack with 2 x 3-inch uprights.
"Haven't yet fixed that in their cloning services" lmfao. Great way to start the day!
:)
I was one of the unlucky ones that received a stuck roller 😔 though the other roller spins like a gyroscope.
Damn it!
Thanks for this! I see on Titan's website that they have since changed that nut on the front to a flush fitting fastener.
Yeah seems they updated the design some, but also doubled the price lol.
@@BasementBrandon I got the X3 version. That one still $79.
Great review on a product that I have wanted for some time but didn't think I could afford while I am still building out the rest of my home gym necessities. I have now incorporated a number Titan products (squat rack and dip bar, landmine parallel handle, wall ball, conditioning rope, box jump) that have worked really well for us. Thank you!
No problem! Def a lot more attractive price than the other options
I just got some good roller J cups from a no name brand that only sells them so that they fit on their own personal rack then cut the extra piece of metal to have it fit on my Rogue Rack lol, cost me a whole 35$
Nice dude!
I just received mine And yes they fixed those two issues but now they cost twice as much as they used too.
It ll be nice to know if the rollers from the Ghost will fit the Titan ones ,Since Ghost Strength sells them for $40
Great review?👍🏻
Thanks! I got rid of these otherwise I'd try the rollers.
Thanks for posting the hardware size. I was wondering if the X3 was 1” or 5/8” hardware.
no problem!
The girl friend thought I was watching a video about bra sizes
J-cups 🤣
hey now!
Too many risks of damaging your barbell on these. Should just wait for the inevitable Version 2's which will be much better lol
Tom Schlong I wouldn’t say too many risks, I mean in 4 years of garage lifting I’ve maybe hit my j-cup less then 10 times.
My thoughts exactly!
I think the damage part is pretty low, but yes I think these can def be improved upon!
Breathing hard asf, bro. 😩😩😩
Eh I was trying to talk as fast as possible to get this video time down. Try doing that for 10 mins straight and having a mic 2" from your mouth lol.
I received Titan Roller J-Cups yesterday. One of my rollers was too long to rotate. I used a disc sander and it works as it should. Though annoying, I have to say for the money these are a steal compared to other options or lack of options. Glad I wasn’t the only one who had a non-rolling roller.
I just don't get how they can screw that up, seems like such an easy thing lol
Brandon Campbell Diamond
Quick Question: Do you still like the 6 shooters after having used them or would you look at something else?
@@gregw7094 They're awesome
$70 compared to $200-300 for a set of jcups is a win in my opinion! Definitely going to purchase for a second set of j cups for my x3 rack!
Nice!
I got in a set for the X-3 (3x3, 5/8 pin) today and they've updated since this release you got in the video - there's no more protruding bolt on the front, and all three sides that contact the rack have UHMW now. I'd rather have the updated Ghost cups, but I can't justify the cost and these things are excellent at
I'm hoping they took my suggestions as I know they watch these videos lol. It would also explain the price hike.
Overall I am pretty happy with these especially for the price. As with all the Titan stuff I have some modifications are required. The pin on mine didn't line up, part of the reason is that mine is a hand built Monster Clone so my holes are not 100% perfectly spaced, but about 20 minutes with my bench grinder I was able to taper the pins and the work fine now. I am glad I saw your IG post about these last Saturday and was able to snag these before they went out of stock and the price increased...but even at $80 these are still worth the price.
I agree, usually either need to wait until v2 or DIY, but at the price point, it's a risk sometimes worth taking.
Good to hear more about these. Ill have to look at the 2x3 option, but I think they should work great on my bench.
Right on!
Thanks for taking the time to cover all possible price range options. Not many garage gym equipment reviews show $$$ and $ options. Keep up the great work!
Just wish I hadn't spent so much money on all these lol
Brandon Campbell Diamond wish I had the money to spend on all of this.
Really enjoy your videos. You find a lot of great stuff!!!
Commenting on the fitment issue, about how the screw in nub wouldn’t fit- I initially had that issue in my 2x3 set. However the plastic inserts on the inside of the cup are yet again not level. So I had to angle the cup slightly and once I did that the nub would screw in. Another fit and finish issue but if you want the nub in to make it secure try that
good tip!
I have two sets of these and all four spin well just like yours. Pleasantly surprised with how much I like these.
Go buy a lottery ticket with that kind of luck :)
tbh I'm more concerned about the height of the cup rather than the depth. I don't like losing my back tightness on bench because I have to lift it up so dang high to clear the edge of the front.
I know a lot of people ended up cutting off the lip
You're truly amazing on your reviews. You think of everything.
I appreciate that!
Titan are definitely watching your channel.
They just be creepin on everything
I purchased J-Hooks from Titan but unfortunately faced issues. One of the hooks doesn't align with the holes on my Rogue Monster Lite Rack, making it impossible to even start threading. This seems to be a clear case of tolerance issues, as one hook works while the other doesn't.
Despite acknowledging the defect, Titan's response was disappointing. They suggested I get it repaired by a local metal worker at my own expense, simply because I'm not using a Titan rack. Furthermore, their return policy requires me to take a photo of the part in its box for return authorization, pay for return shipping, and bear a 20% restocking fee. This experience falls short of the customer service standard I expected from Titan.
If you complain enough it might change things.
Thumbs up for “Bubba Gump lip”!🤣
(though that was the shrimp company name, not Bubba’s name [Benjamin Buford Blue], which I honestly didn’t even catch until I started typing this..)
Haha you're on top of your references.
I should have pulled the trigger on this. Was waiting for your video first.
Yah surprised they jacked the price up so soon.
I got mine today and they work/roll just fine.... great price and product in my opinion
Nice!!
Wonderful review. I tend to purchase items that may “need work” to potentially save hundreds. I find myself modifying most products anyway. None of the things you listed deterred me from buying them. Thank you.
Apparently they updated these by removing the front bolt and adding more UHMW inside. Prob explains why they're now more expensive too.
I have a RML 690 and my two JCup complaints are (1) the Lack of protection on the lip and (2) the protection for the uprights and (3) the slop. We pay good money for the rack and the JCups hard on the finish.
interesting, for my 690 my standard cups from rogue were great.
I have the X3 and T3 variants of these. I also have monster lite and infinity line racks and the screw in pins do not fit the rogue racks but fit perfectly in the Titan racks. The rollers on mine spun great. However the plastic comes off on more aggressively knurled bars. The duffalo and westside power bar 2.0 cut into these rollers pretty good.
appreciate the feedback dude!
@Ryan-da-Beast Still going good!
Are you going to get the NIke Romaleo 4s?
No, but they look a lot more appealing than the 3's!
Glad the pin isn’t essential, just got mine and found they don’t line up at all with my synergee rack.
They can help stabilize but can still be used without!
I have both ghost and just got these yesterday ghost definitely nicer but for price the Titan well worth it. Both mine spin and the pin holds them in place nicely, wish they would have used a pull pin rather than a screw in pin. For 65 bucks they are a good buy
Agreed
Titan has section to write in suggested items for them to make lol. I could use some Titan fat bells!
So hyped for a new vid 👏🏻👏🏻
Thanks man!
I have version 2. I like them alot but the lip does annoy me. I have hit it flat benching. I find the roller too long. I like a smaller lip and a little shorter roller. Just my preference. But these are the best value hooks on the market. biggest bang for the buck. May buy a 2nd pair for the wife. She is using regular j hooks. Love the screw in. No movement at all. A big bonus. They fit my PR-400 perfectly.
appreciate the insight!
Hey Brandon...I'm building a rack 3x3 w/ 1" hardware. I noticed your rack has keyhole cut outs on the sides of the rails. Is this necessary or can I just go with 1 1/8" holes all around?
they are largely unnecessary IMO
Nice to finally see these available for a sane price...which one would fit a rogue sml-1 squat stand?
the x-3
I got mine today, the t-3 version for my r-3. The rollers work fine but as Brandon said the locking pin does not fit. I am going to see how much a machine shop will charge to trim down the locking pin so it will thread in.
Let me know!
wait WHAT!!!, when the hell did these come out. I check their new stuff all the time 😱
Last week
Has Rogue made these yet? Because that is when it will be done 100% right if they haven’t. Titan is completely sold out. Would have liked to try a set on my Rogue ML Power Rack.
When I was making mine a few years ago a little bird told me Rogue had looked into these but decided they didn't want to pursue.
Another awesome review B, gonna see if they will fit my rack!!
I love your rack Brian.
Ghost could have easily attached UHMW to the front edge which would "countersink" the bolt.
Maybe in their V2 they're releasing
Other companies charge $300 for something Titan can sell for $60, sad.
To be fair the other companies make them here in the states and are very small. Titan imports from China. Connor isn’t even a business, he just makes his own gear after hours at work.
@@BasementBrandon I think that was probably a dig at Ghost rather than the guy you had fab up your own prototypes!
What is the point of roller j-cups? I've never used them. I'd assume just to move the bar side to side to 'set it' in the right position.
Yes to move a loaded barbell to center.
I live in Toronto Canada. Do you know any stores where I can pick up the ironmaster adjustable dumbbells?
Treadmill factory is restocking all their stuff. Call the Markham head office
Not sure TBH
Great video Brandon!
Thanks Danny!
Great vid, can’t wait for the next. 🔥🔥
Thanks!
may not line up, may not roll...man after watching both you and Alan Thrall's videos I may never buy a Titan product lol. Random unrelated question.. Do you have a video about cleaning knee sleeves? I can't seem to find a way to wash away the stink lol. Thanks for the videos!
Haha I'm critical of titan, but I also praise them when they do well (like the SSB v2). For knee sleeves I always have just thrown mine in the wash without issue, but I know some peoples machines aren't as gentle.
What's the difference between a Roller and a Sandwich J cup? Functional wise? Debating between the two. i know should protect the bar significantly more than a standard J cup. but what else, aside from the Roller allowing you to recenter the bar?
That's about it!
Might check those out . I got lucky on offer up. Was able get my weights for $1 lb still lol
Good find in these times.
How is Bench Pressing from a roller cup - in general?
At a glance, I presume the roller benefit is for adjusting the bar left to right, but not so much front to back. Seems that might really grind that plastic - not uniformly since the base rolls. You may have more wear on any given spot on the roller from one j-cup to the next??
I would be interested in replacing my backup 'standard' Rogue J-Cups since those have no UHMW at the tip, and not secure in the back of the rack (hate that swing.)
I don't find it as helpful as with squats. I tend to re-rack my squats more to one side.
@@BasementBrandon I thought it was possibly just the angle, but it does seem I've noticed you twist your left side back a bit and lead with your right leg....
I have leg imbalances myself.... left quad weaker yet bigger.... go figure.... lol
The king of roller cups has spoken! Be interested to see your full review and see what kind of resistance it has when trying to move a fully loaded squat bar back and forth - I tend to re-rack a squat a little to the left and my OCD means I have to have it exactly centered before I can un-rack it again for another lift.
Will let you know!
he brandon, quick question. ordered these to hopefully assist in keeping noise down, as my 1 year old wakes up if you fart loud enough. how is racking after completion lol. great video!
About the same unfortunately :(
You mentioned that you can replace the rollers, where can you get UHMW roller replacements?
You can buy UHMW rolls if you search for it, or can purchase them from people like Texas Strength Systems.
Uncle Brandon, you gonna buy the Nike Romaleos 4?
wait is there a new romaleo?
jojojaykay yeah, look at the main Nike store.
@@jojojaykay yes. They look like they remade the Romealo 2. Which is a very good lifting shoe.
Prob not. I still have a like new pair of 2s and my adipowers. I sold like 5 pairs of oly shoes when we moved bc they took up space and I couldn’t use them.
I want the t3 roller cups, hoping they restock or drop a 2.0 version with upgrades. The j cups that come with Vulcan's 2x3 squat stand are pretty bad. If these don't restock soon I'll end up buying the sandwich j cups to get by.
Right on! What don't you like about the Vulcan ones?
@@BasementBrandon just feel cheap, plastic coverage is kinda crummy. The ones on their 3x3 1" cups look much better. I had to go with the 2x3 stand for height limits. Was also bummed they shipped my order without realizing they couldn't fill the Absolute bar I ordered. Ended up having to get a Wright Oly bar locally which is fine but not ideal. The Vulcan Pro SSB is a 68 pound monster though! Loving the home gym life and regretting taking so long to dive in- I'm already mapping out my future gym when I have more space.
I'm hoping to find a good power bar before gyms reopen so I can try to sell the Weight for what I paid for it last month.
Nice tractor Brandon
You should see my drift it.
Hey bro, so if I buy any 1 inch hardware rogue monster rack, can I use Titan X3 accessories perfectly ? I want to use neck and wrist rollers but I’m skeptical about the fitting. I’d be so happy if you made a video on this experiment.
No if you buy a monster rack you'd have to buy the "TITAN" series attachments.
Any chance you could measure from the top of the attached peg that slides into the rack to the top of the roller?
Trying to compare the drop distance from mount to where the bar sits.
Thanks a lot!
Ah sorry I got rid of these.
Nice review...your channel s becoming a favorite of mine ne
Awesome, thank you!
Do you think this would fit my 2x2 body solid cage, Brandon?
I do not.
@@BasementBrandon thanks for your reply brother, I'll keep looking for the right one, right now im working on a temporary solution! 👍
Hey Brandon I've been looking on the internet and watching videos in starting up a home gym. I've looked at rml-490 and 690, rep pr-5000 v2, and rm-4. All if then except the rml series I'll have to wait on. I'm fine paying a little extra for something as this will be a long term investment. But I want something that's going to meet my standards and one thing is lat pull down which rep has.
As for the rml series am I confined to mostly monster lite attachments? I'd like something that is versatile and I can add attachments when I want it need to. Idk so many choices just hard to make the right decision. Hate to spend 1800 on rml-690 and later find out I should got the rm series or even rep.
I think rogue makes the higher quality stuff, especially attachments, but rep has done a good job closing the gap. Can’t really go wrong with either. You can adapt some Titan stuff to the rogue and potentially some rep stuff as well
Similar design as the ATX Fitness roller jhooks. Probably from the same factory.
Titan is known for cloning, I think they copied the 1st gen ATX ones (which are being updated).
Wish they made them for 2x2 racks.
Yeah no real options there just yet. The bells of steel ones might be able to be adapted.
@@BasementBrandon I'll have to take a look. Thanks!
Quite informative, thank you. However, what gym timers would you recommend?
Don't have much experience there, I'd suggest getting an app for your phone/ipad, much cheaper!
Brandon Campbell Diamond Okay! Thank you. 🙏🏾
Which one would you recommend more; the rollers or reg/sandwich jhooks?
Prob the sandwich for most if you care about function and protection.
Thanks for the response! I’m purchased the Titan Rollers but def will be purchasing the sandwich ones when theyre available
Titan must of listened to your review. Just got them in and the bolt in the front is gone lol
@@two6_677 too funny
Do these fit the Rogue RML690? If so, which ones? Your link lists 3 titan rolling jhooks. Thanks.
You'd have to get the ones made for the X3.
Do you know if these will work on 3x3 fitness gear power rack?
What hole size?
@@BasementBrandon 1 inch hole
@@andrewpadgett8986 The main post should fit, not sure the back one will liine up as it depends on hole spacing.
Hi Brandon, Would these roller cups fit on the Rogue SML-2?
would be the x-3 version
How is it holding up?
They were ok, but out of all the ones I own they were the lowest quality so I've sold them.
Will a SSB fit in this?
It will
Hi Brandon I own a rogue sml2 but I can't find the right J cups for my Titan saftey Sqaut bar (sso) it never rest on the cups evenly and I hate it. Do you think these will solve my issue ? I'd appreciate a response thanks. Brandon
Prob not. Where does the bar sit on your normal cups?
@@BasementBrandon I'm surprised you replied brandon thank you. When I rest my SSO bar on the Rogue J cups they end up sticking out or slanting out of place ( it's hard to explain) but I'm gonna get a rogue monolift and see if it solves my problem. Any recommendations?
@@chichaldino I might suggest using a thin piece of felt inside them to make them more snug. Much cheaper solution.
this fits 3x3 1 in?
Should
I wish there was a version for 2x2 racks
ah yeah sadly not too popular.
And it is sold out :(
Hah yeah they went quick!
Which one is best for bench? With best price. I don’t want to hit jhook
I actually like sandwich j cups for benching.
@@BasementBrandon u won’t hit a jcup with this? Titan fitness t3 jcup would work better than regular jcup
@@Soulriderpowder Hitting the cup is more based off where you position yourself and bar path.
@@BasementBrandon that make sense.
Great video. Any recommendations for myself looking to get J-Cups that live in the UK? Can't exactly get titan as they are only US based. Thank you.
These ones are actually a clone of an ATX cup which is a European brand.
@@BasementBrandon Oh cool thanks. Would it be a problem putting J-Cups on a power rack that doesn't have holes on the outside? It only has holes on the inside. I wanted to get the cups so I can do ohp with them from the outside as it's not high enough to do them inside the rack.
The holes don’t go all the way through?
Do you have any video on Rep Fitness gear?
Yes I have a few. Reviews of the fb5000 and power bar ex as well as some suggested gym builds.
GHD... 🤔
Will we be seeing a regret video like on the reverse hyper? 🤔
I love the GHD 😝
Would you know who offers a 2.5”x2.5” roller j cups?
Don't know of anyone who does.
They recently bumped the price of the titan series rollers to 80 bucks
I showed this in the video! :)
@@BasementBrandon yea my bad. made the comment before watching all the way to the end
Great video! As always, super informative with a splash of sexiness ;)
Thanks Alex
What's the reason for the rolling jhook?
makes it easier to reposition the bar after a set
Centering a heavily loaded bar!
Swap out the bolt with a Sex pin . They are flush on both sides ...
you have my attention
Brandon Campbell Diamond , these : apexfasteners.com/fasteners/sex-bolt
Hey Brandon how would this fit on a PR 5000 rack?
It will.
@@BasementBrandon awesome! Thanks. Do you still have them? If so how have they held up?
@@alexbarrientos3391 I sold mine when I was consolidating my gym stuff before my recent move. They're ok, not as good as some of the others I have but by far the most affordable.
Nice john deer ya got back there
You should see me drift it.
Will these fit REP PR 5000 V2?
yes, although the hitch pin might not line up
@@BasementBrandon do you even really need the hitch pin???
Anyone know any places that still have weight plates in stock? Lol
Most of what I see are bumpers.
I have a Rogue R-3. Anyone know if these will fit - I guess it'd be the T3 version on Titan fitness? Thanks
Titan x3 compatible with monster lite series. Think t series compatible with monster series
@@dkk9052 wouldn't it be the infinity series that i'd be lookin at?
Rogue r3 is a 2x3 rack. The t3 is the titan equivalent, 2x3 with 5/8inch pin. X3 is 3x3 with 5/8inch pin and titan series is 3x3 with 1 inch pin
Not positive I have x3 and x3 compatible with monster light rogue attachments
I think rogue holes are slightly smaller though their is a site online with what rack accessories are compatible
Does anyone own these and will the pin line up on a REP PR-5000
Ah I sold mine otherwise I'd test.
8:36
"And even tho there some potential hazards with this"
Dude its tital fitness, you have to make sure you have health insurance when using their products
Eh outside of their safety straps there hasn't been any issues.
I like how you go through and delete comments. Cant take criticism
I don’t delete anything lol
Will these fit on a powertec rack? Has anyone tried?
Does it have 1" or 5/8" holes?
@@BasementBrandon Hey Brandon,
It has 2.5"x2.5 "uprights with 1" holes. Looks like these are 3"x3" so guess they wont. Bought a pair from another company that seem to be the right dimensions. It has nice UHMW padding but looks like the lip on the hook doesn't have any protection. Any advice for padding a j-hook? Might be a good video. Have some new bars on the way and want to avoid damaging them. Thanks!
Nothing is touching my rack with UHMW lining! Lol
Lol
I wish they made it for my 3x3 half rack
Preston Richardson the ones in the video are on a monster rack, 3x3 with 1”, they also sell the x3 and t3 versions
@@davidc1659 . I looked on the website and I didn't see them at first but I see them now. Thx!!!
they have 2 3x3 options!
@@BasementBrandon what's the difference between the two?
Preston Richardson the pin size, I list it in the video towards the end I think.
cool
no titan at SMG plz. Can't take all the strong people using lol.
Hey, can you measure the height of the lip (from the roller) for the Titan? That's the only thing holding me back from pulling the trigger
I can try
@@BasementBrandon Thanks. Or I guess my question is, is getting the bar out of the hooks harder than with the sandwich cups?
Justin it’s not. The thing that’s different is the sandwich cups will sit lower bc the whole cup is longer. Meaning if I put them in the same hole, the Titan ones are too high to use so I would need to put them lower.