- We appreciate your Support and Purchases! - IE B8 and B8.5 Audi S4 | S5 Intake www.shopdap.com/ie-audi-b8-b8-5-s4-s5-cold-air-intake-ieincg2.html Plastic Cowl Rivets www.shopdap.com/4d0-807-300.html Grommet for 3.0t Audi Intake Air Box www.shopdap.com/8k0-129-669.html Tools Used during this Install 8pc Magnetic Screw Drivers Set www.shopdap.com/8-piece-magnetic-screw-driver-set.html Torx Bit Set www.shopdap.com/vw-audi-torx-sockets.html
Do you need to put the tray back? Or can you leave this off and air will be sucked in more/ less efficiently? Great install. I fitted a K&N filter but with the OEM box; when I replace this, will have this open. The exhaust needs doing though, and I know DAP have done this ever so efficiently. Thumbs up all day, every day...
Just got this on our SQ, kit two separate silicone sleeves. Was a tad cumbersome to install to make sure everything lined up properly, and not have the heat shield want to pop off the mounts. Why does the S4 kit have just one tube?? Also the connection to the TB can be a pain since there's only around 1/2" to attach it to, always wants to come off.
Do you need an type of engine management correction for this intake? ie.. Remapping? Also, does the silicone hose which goes into the TB have a nipple for the vacuum hose you removed from the Original accordion hose?
Does this intake deal with heat well, I live in Florida and its already hot as is so i opted for the AWE kit instead of the IE one because its still an enclosed box, the only thing i dont like about it is that the supercharger wine is very quite and can only be heard at low rpms after about 4k or so sound-actor kicks and and drowns it out. Id like to use the IE one for the sound but im worried about have the car suck up alot of engine bay heat.
Hi, Great video - One question: Where did you place the Air Mass Sensor or the 3.0L TFSI engine does not have one? if it does have one, where is it located, Thanks!
@@TRICKYBYRD Thanks - I found that this engine has (2) Pressure Booster Sensors, and they provide the MAP data to the ECU - both are placed on each side of the Supercharger (in the picture of the video, the left one is right above the tip of the tool shown.
The question still remains if they really produce any real power. Some have even reduced power. Sound good but... Would like to see if there has been any noticeable difference in throttle response or performance over the rev line. Adding a less restrictive filter to the Audi airbox works the same?
I think the stock airbox and filter is a pretty good design from OEM. If I owned one if these cars I would gut out the stock box, swiss cheese the passenger side away from the engine, stick a decent foam type filter (it comes to mind,) and possibly change out the hose itself for something larger/ with less pleating like a stainless/ silicone tube/ silicone couplers. Back in the days of vw ownership from mk1 on, we used to swiss cheese CIS airboxes all the time. It works well. Looks like that box has a snorkel inside the inlet portion as well, just like most manufacturers do. Usually they pop out with a flathead. I bet I could make the stock box function just like that CAI. Might not look much different than OEM at first glance but it would probably produce some decent gains and the same SC noise if done correctly.
@@psavel274 Hi Pete. I have made adjustments to many cars over the years and while a noticeably modified car, (larger turbo, software, etc) probably will benefit from a CAI, (that uses an inlet pipe other than metal) most don't. My current Audi A6 TDI has a software modification and a high flow air filter in the stock airbox. I don't feel the need to put holes in the airbox as it's design from Audi seems more than sufficient for airflow, (as well as cool air). However, if there were additional mods, (like a larger turbo) that would be a good move. In the past when drilling holes in a stock airbox, I put a screen inside the box to cover the holes. Just to keep larger items/bugs from getting in. FYI- I really didn't notice any difference in performance with the fiter but I can slightly hear the turbo spool at times.
Does this intake fit an AUDI A6 C7 (2013) quattro? or what intake do you recommend? ive been looking for one for the longest time and i cant find one. please advise.
I heard this could also be installed in 3.2's as they have similar or exact mounting spots. Got an '11 Q5 3.2 and was thinking if this would make any sense :D
somehow I can't seem to get the supercharger noise on my S4. I changed the intake pipe and also drilled some holes in the airbox lid to expose the air filter. still no whine and I wonder why. my S4 has a 2009 manufacturing date, but was registered in 2010.
Hi D.A.W.. i been trying to find a downpipe resonator in 2.5 or 3inches.. pretty much the mid section of my exhaust from the cat back.. i cant find anyone who sells it for a 2004 audi a4 1.8t b6 quattro 6 speed manual. Can u help me find the upgrade replacement?
Frosandcons 420 If you get an aftermarket intake like IE and you get a Stage 1 tune..It works better for the tune vs stock intake..Now just intake..I personally feel only gain I got was the SC noise..
@@HuheJass I guess..Honestly with an open intake even without tune it definitely can finallly here some whine but going DP is where its at..Specially changing both pulley
@@mikeortiz6584 idk why but Im considering a cold air intake (even just replacing the baffled section) just for the sound. I would probably do the tune to get launch control back. If I wasn’t worried about the trans I would definitely do the downpipes, cat delete, and pulley upgrades! Doesn’t that bump it to over 450-550ish hp??
I just bought a 2014 S4 that has this intake and a IE stage 1 tune. Im disappointed cause I cant hear my supercharger for shit 🤷🏼♂️! At least with the windows up when I crack into it, I cant hear any supercharger whine 🤔
Remove and replace or introduce the maf just past the cats basically at the very beginning of the down pipes. Divert catch can into intake inplace of maf. You'll need a new silicone adapter you can sloppily jab a hole or 2 in for the catch can and ZOOOMMM...off you go to the body/auto shop
![[Sub Thai] APT. - ROSÉ & Bruno Mars](http://i.ytimg.com/vi/bYjhzP8x_uc/mqdefault.jpg)
- We appreciate your Support and Purchases! -
IE B8 and B8.5 Audi S4 | S5 Intake
www.shopdap.com/ie-audi-b8-b8-5-s4-s5-cold-air-intake-ieincg2.html
Plastic Cowl Rivets
www.shopdap.com/4d0-807-300.html
Grommet for 3.0t Audi Intake Air Box
www.shopdap.com/8k0-129-669.html
Tools Used during this Install
8pc Magnetic Screw Drivers Set
www.shopdap.com/8-piece-magnetic-screw-driver-set.html
Torx Bit Set
www.shopdap.com/vw-audi-torx-sockets.html
Some people are just natural teachers. You sir are an excellent one. Appreciate your videos.
soundcheck before/after would be awesome next time :)
literally had a heart attack thinking all those screws were going to fall in the engine bay once you flipped the filter box upside down
Literally?
Literally??
Yay, installing it now! Thanks for the video.
Great narration . I really appreciate it, it helped me out . Thank you!
Would have been nice to have Dyno before and after to know what it does (Bang For the Buck). Good videos.
We did a few back then when "tuningbox" wanted to expand in the USA.
These are great heat generators, nothing cold about them
13:54 Doesn't look like you have to take the trim or duct parts off at all.
Do you need to put the tray back? Or can you leave this off and air will be sucked in more/ less efficiently? Great install. I fitted a K&N filter but with the OEM box; when I replace this, will have this open. The exhaust needs doing though, and I know DAP have done this ever so efficiently. Thumbs up all day, every day...
Thanks for the video! Helped me do my install.
I went with IE on my A3, it is great. So much whoosh
good vid bro good on explaining everything also
Great video, very informative and easy to follow. Will be purchasing and installing soon on my b8.5 S4 !
I love you guys. THANK YOU
"supercharger noise" AWESOME!
Thanks for the great video. I will be buying this CAI. I’ll Probably get it from your website, in order to support your channel.
Awesome video cuz I'm thinking about getting a tune but I think I'm instead of doing the intake I'm just going to buy this the K&N air filter for it
Looks like it went from a cold intake to a warm or hot intake.
Man....I really need to hear this in person before I buy it. The sound might just be obnoxious.
Once you close the hood its sweet
Add more isulation under the hood if you feel its annoying or go with eventuri intake it has less whineee
Don't you need to somehow adjust the software/mapping for this to work, as this mod changes the amount of air that gets into the engine?
Just got this on our SQ, kit two separate silicone sleeves. Was a tad cumbersome to install to make sure everything lined up properly, and not have the heat shield want to pop off the mounts. Why does the S4 kit have just one tube?? Also the connection to the TB can be a pain since there's only around 1/2" to attach it to, always wants to come off.
Do you need an type of engine management correction for this intake? ie.. Remapping? Also, does the silicone hose which goes into the TB have a nipple for the vacuum hose you removed from the Original accordion hose?
No tuning required. Yes it has that on it
@@Deutscheautoparts Again, Thank you very much, for the confirming, and clarification.
What power gains would you expect from this install ?? Looks great btw 👍🏻
Bought same intake. Got 13 more out of it. Really just for the noise
@@benmcdonough7377stock tune?
Unrelated, but do these cars not have MAF sensors?
Correct, no MAF sensor
Does this intake deal with heat well, I live in Florida and its already hot as is so i opted for the AWE kit instead of the IE one because its still an enclosed box, the only thing i dont like about it is that the supercharger wine is very quite and can only be heard at low rpms after about 4k or so sound-actor kicks and and drowns it out. Id like to use the IE one for the sound but im worried about have the car suck up alot of engine bay heat.
trey hamilton i would also like to know. have you found out about your question being answered else where?
do you see the need to change the throttle body also.. seems like they both go together..
What happened to your snow screen in front of the intake scoop? Did you guys take it off, or was it missing when you got the car?
I already throw mine away, air filter can catch everything already anyway.
Hi.. looking to flash my 14 S5, and thought this would be best to do beforehand..will this be ok in colder areas/bc canada .. thanks
what did you do with the vacuum hose you took off by the throttle body?
At 11.58 he reattaches it to the intake hose.
That was the exact same thing I was interested in, couldn't see where he put that besides just saying that he connected it.
11:40 so that little vacuum hose have to be disconnected now ?
did you get heat soak?
Hi, Great video - One question: Where did you place the Air Mass Sensor or the 3.0L TFSI engine does not have one? if it does have one, where is it located, Thanks!
Just past the cats.
@@TRICKYBYRD Thanks - I found that this engine has (2) Pressure Booster Sensors, and they provide the MAP data to the ECU - both are placed on each side of the Supercharger (in the picture of the video, the left one is right above the tip of the tool shown.
my injen air intake does not come with the secondary air breather filter. Should I buy one?
Thank you
The question still remains if they really produce any real power. Some have even reduced power. Sound good but... Would like to see if there has been any noticeable difference in throttle response or performance over the rev line. Adding a less restrictive filter to the Audi airbox works the same?
I think the stock airbox and filter is a pretty good design from OEM. If I owned one if these cars I would gut out the stock box, swiss cheese the passenger side away from the engine, stick a decent foam type filter (it comes to mind,) and possibly change out the hose itself for something larger/ with less pleating like a stainless/ silicone tube/ silicone couplers. Back in the days of vw ownership from mk1 on, we used to swiss cheese CIS airboxes all the time. It works well. Looks like that box has a snorkel inside the inlet portion as well, just like most manufacturers do. Usually they pop out with a flathead. I bet I could make the stock box function just like that CAI. Might not look much different than OEM at first glance but it would probably produce some decent gains and the same SC noise if done correctly.
@@psavel274 Hi Pete. I have made adjustments to many cars over the years and while a noticeably modified car, (larger turbo, software, etc) probably will benefit from a CAI, (that uses an inlet pipe other than metal) most don't. My current Audi A6 TDI has a software modification and a high flow air filter in the stock airbox. I don't feel the need to put holes in the airbox as it's design from Audi seems more than sufficient for airflow, (as well as cool air). However, if there were additional mods, (like a larger turbo) that would be a good move. In the past when drilling holes in a stock airbox, I put a screen inside the box to cover the holes. Just to keep larger items/bugs from getting in. FYI- I really didn't notice any difference in performance with the fiter but I can slightly hear the turbo spool at times.
Hello nice video as ever
Does this intake fit an AUDI A6 C7 (2013) quattro? or what intake do you recommend? ive been looking for one for the longest time and i cant find one. please advise.
Good question
I was wondering if the orientation of where the filter meets the accordion hose is virtually the same as stock location?
What Iif the secondary air hose os broken and not connected will the car loose power?
I heard this could also be installed in 3.2's as they have similar or exact mounting spots. Got an '11 Q5 3.2 and was thinking if this would make any sense :D
Great Video, is it legal in germany or is there any permission needed?
Great video but the link to buy the intake doesn't work
7-Spd DCT service next
the tiny filter for the secondary air hose it's important or it doesn't matter if I put it or no?
How water safe is this intake?
Can you just buy a performance filter cone and just attach it to the factory intake tube?
Yes actually. AFE pro 5 R is a great drop-in upgrade filter.
somehow I can't seem to get the supercharger noise on my S4. I changed the intake pipe and also drilled some holes in the airbox lid to expose the air filter. still no whine and I wonder why. my S4 has a 2009 manufacturing date, but was registered in 2010.
Is your intake or aftermarket like ie
So not sure if I'm the only one. After I installed mine every once a while my epc light comes on and goes into limp mode how do I fix
Could be a bad coil this exact thing happened to me a few days ago
I should get a tune or plug and play?
Can you install a CAI on the 3.0T without having a tune? Or will it throw a CEL?
It will not throw a code and you can do it on stock tune...sounds awesome in person
Hi D.A.W.. i been trying to find a downpipe resonator in 2.5 or 3inches.. pretty much the mid section of my exhaust from the cat back.. i cant find anyone who sells it for a 2004 audi a4 1.8t b6 quattro 6 speed manual. Can u help me find the upgrade replacement?
What about the vacuum hose by the throttle body?
Also Can you leave the stock air intake cover connected? (The stock airbox)
is an intake upgrade better for the engine or is the stock intake good enough? even if you are stage 1?
Frosandcons 420
If you get an aftermarket intake like IE and you get a Stage 1 tune..It works better for the tune vs stock intake..Now just intake..I personally feel only gain I got was the SC noise..
@@mikeortiz6584 totally worth it for more beautiful vacuum noises
@@HuheJass I guess..Honestly with an open intake even without tune it definitely can finallly here some whine but going DP is where its at..Specially changing both pulley
@@mikeortiz6584 idk why but Im considering a cold air intake (even just replacing the baffled section) just for the sound. I would probably do the tune to get launch control back. If I wasn’t worried about the trans I would definitely do the downpipes, cat delete, and pulley upgrades! Doesn’t that bump it to over 450-550ish hp??
Check engine light/any problems after intake install?
No, not unless you forget to attach vacuum line.
wanted to do this on my C7 A6 3.0 but there is no kit :(
Same kit applies to A6/A7
would this have any benefit on a 2.0 TDI?
how is unitronic tune compared to ie ? Who offers TCU?
Where does the maf sensor go?
Anyone have this installed? Does it whine just in hard acceleration or will this be whining cruising on the freeway?
The link to the intake doesn’t work
where is the MAF
Did I miss the vacuum hose being reinstalled?
Brian C I didn’t see it either
11:05
Yeah that part he didnt cover . The intake doesnt have a hole for it
Pretty expensive intake to have a rubber/Silicone tube :( .. HPS has a sick intake almost $100 less
Where do I get the iE intake from ???
Any iE retailer
Sir engine overall ka video
I just bought a 2014 S4 that has this intake and a IE stage 1 tune. Im disappointed cause I cant hear my supercharger for shit 🤷🏼♂️! At least with the windows up when I crack into it, I cant hear any supercharger whine 🤔
You still have the s4 with the intake?
Will this fit a 4.2l 2005 s4 ?
B8.5 what year s4 is it?
How about the MAF?
Remove and replace or introduce the maf just past the cats basically at the very beginning of the down pipes. Divert catch can into intake inplace of maf. You'll need a new silicone adapter you can sloppily jab a hole or 2 in for the catch can and ZOOOMMM...off you go to the body/auto shop
I want one
No..sold out..not for you. Leave..GOOOO WE AI T GOT NOTHIN FUR U YA HEAR ME GALD NABBIT.
Would this intake work on a 2012 Audi A7?
What about a c6.5 3.0t?
sounds like an electric motor. I would rather keep my stock S4 intake.
Supercharger whine i love it .
I just hate the sound that intake makes
what did you do with the vacum line at the throttlebody ? plug it ? And does this intake fit a a4 avant 2.0 tdi s-line 2012 model ?
My supercharger doesnt whine, do I need to change the whole air intake or will the air/cone filter fix the issue on its own?
Buy the whole tube. 034’s x34 would be my suggestion