I'm not an EQ expert. But after testing tones for so long, and seeing him suddenly raise that one mid-right screeching frequency that I dread, I suddenly yell "WHAT".
Loved this one, the 21min flew by. I can't believe you didn't do the THALL tone, and the iconic ambient/clean delay tone that Tesseract, Fellsilent, and Vildhjarta use. Please do make a 2hr video on this, I'm about sold on bias fx2!
Really chill video, loved grabbing a snack and just watching through it all, you got a really natural live commentary. Only thing I wish was different (and this goes for most of your non-cover vids c;) is to not have the Labyrinth backing track playing in the background at all times when you're doing something. Was a bit distracting to hear that song in the background while trying to listen to the clean and ambient tones edit: grammar stuff
Im also a low amount of mids guy. And I immediately liked how you put a eq at the end. Someone showed me to leave the mids around 5 on your amp and scoop them w EQ in the effects loop basically the idea is that in the amps preamp you want those mids cause they effect how the rest of the frequencies get boosted and make for a more dynamic and huge sound. Not sure if that works in the computer world , but seems like they would. I definitely suggest trying it it blew my mind how much it changed the sound.
Your on the right track there, I think. Still on my investigation for the EQ world. Got this from a friend about this, and its for the Katana. But I think this might be worth testing for sims to. I'll just pass the dialog :) "I know you have always insisted on adding a 5Khz high cut for a better tube tone and to remove some digital harshness. So my question is, do you do that for every patch you make? and if so would you recommend just adding this cut to the system global EQ section after the amp. Hi! I don't do it for every Patch. I never use the global EQ. Some tones like Fender, Marshall and Boutique Amps have a cut around 6Khz. They need to breed a bit more on the high end. What I do is check the position of the eq, amp in or out because it makes a huge difference. Then if there's too much fizziness I remove it with the slide eq around 16K or 8K."
I discovered your channel yesterday with a video in which you have that strong Slavic accent. I indeed thought that it was your normal way of speaking. Interesting stuff anyway.
My how far this type of product has come. I can remember buying a didgitech multi effect pedal, maybe an early RP50 or so. Back then the number of LEDs on it were used as a selling point. Software was around that was just starting to try and offer what BIAS FX and similar stuff does but I never knew anyone who used it. Even recording artists and bands I knew would rather lug peddle boards the size of a car from gig to studio and back than even use my digitech or any "computer" to record. Now Nik and can sound like 10 different bands in less than 3 minutes with a few clicks of a mouse.
The final Ambient clean gave me so many Of Mice and Men's "The Calm" vibes in all the best ways. Also, I just want to appreciate that Delude Reissue they did. Adding those four songs defined Of Mice & Men as a band, imo. It had heavy, ambient, emotional, angry, all of it. In four songs. And they all flowed perfectly and all lyrically were the same story... It was absolutely fantastic.
Noticed he didn’t use the noise gate at the bottom of bias Fx. A lot of people don’t but I find that it cuts out a lot of noise and sometimes do not need an additional noise gate in my chain. Also, some of the metal amps cause the output to clip. If you turn it down, the signal becomes clearer and less broken up.
was hoping youd cover more metal genres.. you should make a video covering how to get -thrash metal -black metal -old school death metal -hardcore punk -etc tones
Hey man love your videos. I just found you recently while I was off school for about 4 weeks with severe anxiety issues but I started watching you that helped me get through the day and I really loved your stuff and now want to learn guitar. Also as a suggestion the song Erebus by Aversions Crown has some wicked guitar sound and I think you’d cover it really well. Keep up the good work.
Thoroughly enjoy the music tutorials. I hope you enjoy educating as much as you do the other kinds of creative videos you do cuz this could be the entire channel from now on and I wouldnt mind tbh
So many more options this time around, that can sometimes be my downfall with over tinkering. However the more I mess around the easier it always gets with digital modelers, nothing will ever be as tedious as tone crafting on an old line 6 pod lol. The latency seems amazing! edit: A lot of people will go to download tones, and find that they sound terrible compared to the sound the creator got. This is where I think the guitar matching feature will shine, being able to match to the guitar the tone was crafted on should clear a lot of that up. "Why doesn't my single coil strat sound like a chunky emg solid body?" Well here ya go kids.
Your welcome to join our Bias Fx and Bias Amp facebook group tone, tips and sharing :) facebook.com/groups/biasfx/ Bias Fx '59 Tweed Lux Amp Blues Jam: th-cam.com/video/T1DnA7CLIy4/w-d-xo.html
What interface / hardware are you using to get this tone? I use Bias FX2 as well and it sounds like complete shit when I match your settings. I am using a Focusrite Scarlett 2i2 for an interface with no additional hardware. Monitors are an M-audio bx5a with a BX10 sub.
I found the cabs that come in Bias fx2 are also horrible for high gain settings I now run LePou cab as an IR loader and some free IR’s and turn the Bias FX cabs off. I’m getting some great tones now.
Loving that Hellraiser. I just bought a ESP EC1000 which is super sweet and costs more than a Hellraiser, at least the non-floyd rose version, and I still want to get a Hellraiser.
Question: 1) What is the difference between Bias FX II and Bias Amp 2? , 2) if the program does have it's cabs, how can i replace them with My personal IR?
Man can you make a tutorial ábout how to use effects ?... When a see a pedal I don't understand how to use it and I don't know how to mix all the effects correctly and I don't know the order..so...can you make á beginner tutorial ? A see a lot of buttons but I don't know what I am doing I only try to find the tone by hear but some times is frustrating...!!! 😔
Simple quick and good sounding tone start with the green overdrive pedal tone maxed to 100, drive to zero. Put through your favorite sounding head. Thatll fix your low end.
There are so much videos explaining this. I begun with this reading a lot. When you understand this and train your ear with eq practice you can reproduce any guitar tone you want
Your welcome to join our Bias Fx and Bias Amp facebook group tone, tips and sharing :) facebook.com/groups/biasfx/ Bias Fx '59 Tweed Lux Amp Blues Jam: th-cam.com/video/T1DnA7CLIy4/w-d-xo.html
I was thinking the same thing I've always used lepou cab with custom IRs and a tube screamer at the front of the chain but I never got satisfactory sounds using bias's amp head sims
It’s easy to remedy if you eq it right and keep the gain at a reasonable level. Worst comes to worst the Celestion impulses or whatever other impulses you want can remedy that
Him boosting 4k didn't help as well lol. But yeah, once people get more into guitar tone they realise Bias stuff actually isn't good. Fine if you just use it to practice with etc but to mix with? No thanks.
Do you use an audio interface with UAD DSP to hear bias in real time without latency? Mainly trying to hear my plugins in real time and not post recording.
Hans-Loïc Karrer Do you know if you have to have an interface with UAD DSP in order to monitor the plugins or Is the monitoring capability based on which DAW you have?
Sorry for total newb question and Im not sure if you will even see this but how do you record with this? Do you play it through loudspeakers and record it or use some program to record it internally on the computer? hope this makes sense!
I don't understand how to connect it to play in real time .. how to connect it do PC or set it. I concected it do my PC via microphone input and nothing but strange noises Can YOU HELP ME PLEASE?! Is there something between PC and guitar? Thanks
I love your videos and this one was really refreshing. Just one suggestion. If you try the tones, you can maybe mute the music in the background so we can hear more of the tone. Keep on going bro!
To be honest. I might go for the Neural, one of all of them. You can downloaded a demo, all of them, then compare. So you can do for the Bias to. Bias has a much more variety of tones. If you decide Bias your welcome to our group, but for just metal tone you be better off with some of the Neural suite tone. :) I actually have the Archetype Plini, and thats a really game changer. Dont forget, you can actually blend does sims, getting a lot of different tones. Your welcome to join our Bias Fx and Bias Amp facebook group tone, tips and sharing :) facebook.com/groups/biasfx/ Bias Fx '59 Tweed Lux Amp Blues Jam: th-cam.com/video/T1DnA7CLIy4/w-d-xo.html
Still using Bias 1 vst with studio 1. And paired with ownhammer IRs this thing sounds real good. And realy close to many modern metal/djent bands. I know people will argue but i would say properly setuped Bias sounds on pair with axe fx. Or atleast very close. One more thing i want to clarify. It is hard to achieve any modern tones without those ownhammer irs. Dont get me wrong stock sounds is good but not enough. After listening to Bias 2 djent attemp i have to say they improved stock tones. This new head sounds better than old stock ones. And overall tone is much closer but still irs would do better.
hey, this is great! I am having trouble setting up my USB Audio Interface with the BIAS FX2 Pro. Any tips for me? Or, would you show your Audio Settings? Thanks!!
*Boom, Tone*
Dude how come did you edit a post that simple ? 😂
Wich version do you use for this video? (standard, pro or elite?)
I
Is that the standard version ?
Nik Nocturnal where u locking nut guitar?
Nik should make a mini-series of messing around with the effects and finding tones but instead of genre, the fans should suggest bands
I second this
Yes.
I third this
Yes
I fourth this
Step 1 - All the gain
Step 2 - No mids
Step 3 - Treble at 11
Step 4 - Volume at 13
Step 5 - More gain
Enjoy your Slayer tone.
You forgot gain
You forgot the metalzone going through clean channel in front of the amp
But you won't be haired that way
Any noise gate?
SLLLLLLAAAAAAAYYYYYYYYYYYEEEEEEEERRRRRRRRRRR!!!!!!!! NO MIDS!! METALZONE!!
Tones:
0:42 metalcore
6:03 djont
9:24 metal lead
12:15 clean chorus
14:48 ambient clean
In A Distant Land thanks bruv
I LOVE DJONT!!! XD
Not sure if I should trust this bias review.
I see what u did there
Oh for FX sake
Don’t let that FX your opinion
You hurt me when you boosted 4k
It physically hurt me :'(
It hurt me too my friend
I'm not an EQ expert.
But after testing tones for so long, and seeing him suddenly raise that one mid-right screeching frequency that I dread, I suddenly yell "WHAT".
That Ambient Clean is amazing it’s the whole reason I just started learning guitar. Those tones I could sit and play for hours. 👌
OMGGGG SAMEE
"A bunch of different gates here"
*4 gates*
@Auom 120 Swnasiqubulotosife If I wanted a bunch of gates I would have hundreds of gates not 4...
but no synyster gates
I see your starcraft joke
@@levin2880 ba dum tss
Guess nik was at the gates
1:34 "forther"
Loved this one, the 21min flew by.
I can't believe you didn't do the THALL tone, and the iconic ambient/clean delay tone that Tesseract, Fellsilent, and Vildhjarta use. Please do make a 2hr video on this, I'm about sold on bias fx2!
This dude plays better testing out amps than I do as a whole.
Samee.
Saaaaame
Thank you!
Keep practicing and you’ll get there, I’m sure Nik has thousands of hours under his belt
Nik's knowledge of different styles and just being able to smash out a riff in seconds is impressive!
Thank you!
Really chill video, loved grabbing a snack and just watching through it all, you got a really natural live commentary. Only thing I wish was different (and this goes for most of your non-cover vids c;) is to not have the Labyrinth backing track playing in the background at all times when you're doing something. Was a bit distracting to hear that song in the background while trying to listen to the clean and ambient tones
edit: grammar stuff
I agree. Maybe he forgot to remove it?
Thank you! I'll turn them down next time :)
Im also a low amount of mids guy. And I immediately liked how you put a eq at the end. Someone showed me to leave the mids around 5 on your amp and scoop them w EQ in the effects loop basically the idea is that in the amps preamp you want those mids cause they effect how the rest of the frequencies get boosted and make for a more dynamic and huge sound. Not sure if that works in the computer world , but seems like they would. I definitely suggest trying it it blew my mind how much it changed the sound.
Your on the right track there, I think. Still on my investigation for the EQ world. Got this from a friend about this, and its for the Katana. But I think this might be worth testing for sims to.
I'll just pass the dialog :)
"I know you have always insisted on adding a 5Khz high cut for a better tube tone and to remove some digital harshness. So my question is, do you do that for every patch you make? and if so would you recommend just adding this cut to the system global EQ section after the amp.
Hi! I don't do it for every Patch. I never use the global EQ. Some tones like Fender, Marshall and Boutique Amps have a cut around 6Khz. They need to breed a bit more on the high end. What I do is check the position of the eq, amp in or out because it makes a huge difference. Then if there's too much fizziness I remove it with the slide eq around 16K or 8K."
I can already see Colin Scott lecturing you on that metalcore tone.
Fairy C Rat don’t scoop the meds
@@rocesboyanthony5343 whats the defference?
All the djent chords were open notes but palm muted.....😢
That’s not djenty at all
The first riff with that tone reminded me of Lamb of God
Sounded like Metalcore still.
With a 6 string too, what a pleb
The EQ10 improved my tone alot, thanks for the tips bro. Still learning the ins and outs of tone adjustment and this helped.
"mids get outta here!"
Da fuq you doin man
The worst thing possible
Esp on a 5153 model.... that amp is god damn bass heavy it makes my Legacy sound like a JCM 800..
But dude what about the best tone of them all, that true kvlt tone 😂
Yeah where the hell is it
All gain, no EQ, recorded on a laptop mic using a Blackstar amp 3 rooms away on max volume. BHoom, solved
Gain on 20 No mids No Bass No Eq Treble on 11 and make sure to use the neck pickup and a single coil
I discovered your channel yesterday with a video in which you have that strong Slavic accent. I indeed thought that it was your normal way of speaking. Interesting stuff anyway.
I sweat like hell when I record myself playing guitar and here is a guy that plays guitar without breaking a sweat for an entire video
He also turned his voice into Shroud's voice with BIAS FX 2
My how far this type of product has come. I can remember buying a didgitech multi effect pedal, maybe an early RP50 or so. Back then the number of LEDs on it were used as a selling point. Software was around that was just starting to try and offer what BIAS FX and similar stuff does but I never knew anyone who used it. Even recording artists and bands I knew would rather lug peddle boards the size of a car from gig to studio and back than even use my digitech or any "computer" to record. Now Nik and can sound like 10 different bands in less than 3 minutes with a few clicks of a mouse.
The final Ambient clean gave me so many Of Mice and Men's "The Calm" vibes in all the best ways.
Also, I just want to appreciate that Delude Reissue they did. Adding those four songs defined Of Mice & Men as a band, imo. It had heavy, ambient, emotional, angry, all of it. In four songs. And they all flowed perfectly and all lyrically were the same story... It was absolutely fantastic.
I was thinking that too lol
I would love to see more of these types of videos!
Will do!
its been 4 years still using your metalcore preset hahha
This sounds so great! You sound great man! Wonderful demo!
Thanks Adam!
My pleasure!
Noticed he didn’t use the noise gate at the bottom of bias Fx. A lot of people don’t but I find that it cuts out a lot of noise and sometimes do not need an additional noise gate in my chain. Also, some of the metal amps cause the output to clip. If you turn it down, the signal becomes clearer and less broken up.
My boi back at it again with the amazing content.
Thank you! :)
was hoping youd cover more metal genres..
you should make a video covering how to get
-thrash metal
-black metal
-old school death metal
-hardcore punk
-etc tones
Hey man love your videos. I just found you recently while I was off school for about 4 weeks with severe anxiety issues but I started watching you that helped me get through the day and I really loved your stuff and now want to learn guitar.
Also as a suggestion the song Erebus by Aversions Crown has some wicked guitar sound and I think you’d cover it really well.
Keep up the good work.
Thoroughly enjoy the music tutorials. I hope you enjoy educating as much as you do the other kinds of creative videos you do cuz this could be the entire channel from now on and I wouldnt mind tbh
8:11 Sounds sick, and familiar, can't name it
I'm getting a bit of an Oh, Sleeper vibe from it - check out the first 30secs or so of Endseekers
that clean chorus tone reminded me of BFMV the poison style guitar. I can't be the only one who noticed!
These vids are really fun to watch and I don’t know why
i fell asleep by that ambient clean tone man that was sick !
Dude dial a day to remember's tone! Love it!
I have used bias fx 2 elite and pedal since like day 1. It's one of my go to VST amps programs.
Would love to see some in depth scale and riffing tutorials.
So many more options this time around, that can sometimes be my downfall with over tinkering. However the more I mess around the easier it always gets with digital modelers, nothing will ever be as tedious as tone crafting on an old line 6 pod lol. The latency seems amazing!
edit: A lot of people will go to download tones, and find that they sound terrible compared to the sound the creator got. This is where I think the guitar matching feature will shine, being able to match to the guitar the tone was crafted on should clear a lot of that up. "Why doesn't my single coil strat sound like a chunky emg solid body?" Well here ya go kids.
The ambient clean part was sick af
dang it! now I wanna upgrade from bias fx 1 to 2
Your welcome to join our Bias Fx and Bias Amp facebook group tone, tips and sharing :) facebook.com/groups/biasfx/
Bias Fx '59 Tweed Lux Amp Blues Jam: th-cam.com/video/T1DnA7CLIy4/w-d-xo.html
What interface / hardware are you using to get this tone? I use Bias FX2 as well and it sounds like complete shit when I match your settings. I am using a Focusrite Scarlett 2i2 for an interface with no additional hardware. Monitors are an M-audio bx5a with a BX10 sub.
Try to add a DI box to your setup bro. I bet it's something about the input signal distortion. I had the same trouble with the scarlett
I found the cabs that come in Bias fx2 are also horrible for high gain settings
I now run LePou cab as an IR loader and some free IR’s and turn the Bias FX cabs off. I’m getting some great tones now.
wth was that synth like sound effect on ambient clean????? I love it!
I think that was the ambient reverb. Sounds amazing
Okay wait you don’t have a Russian accent?
Well he is from Toronto so meh
Шифруется :-)
I also thought he has a Russian accent before watching this after a long break and turns out he doesn’t. Idfk why lol :D
Idk,Nick, personally for me, my favourite tone is yours - so smooth,yet massive and brutal at the same time
Good video but it was weird to have background music playing while you were demonstrating sounds
Great video as always, but i suggest switching and puttinf yourself playing in a small window, and putting the software on the full screen
This was super helpful! Thanks Nik!
Damn! I was looking for this kind of programs! thank you Nik, I'm definitely getting this
this is actually just a good tutorial on how to build a decent computer based guitar tone! kudos!
Could Listen to him shred for hours😍😍🤩
Thanks Julian!
My tone for a TDF kinda tone is 6 bass, 5 mids, 6 treble, slight boost with cut gain, echo delay, chorus, and my neck pickup split into single
okay but wow that ambient clean was so beautiful
I've never actually heard you talk til now. You've got one of those voices man...could just listen to you talk 🤣
Thanks Hilary!
Loving that Hellraiser. I just bought a ESP EC1000 which is super sweet and costs more than a Hellraiser, at least the non-floyd rose version, and I still want to get a Hellraiser.
tbh, this only sounds good because your hand tone is just so good
That ambient clean tone will sound so good with the storm by of mice and men
Question: 1) What is the difference between Bias FX II and Bias Amp 2? , 2) if the program does have it's cabs, how can i replace them with My personal IR?
Man can you make a tutorial ábout how to use effects ?... When a see a pedal I don't understand how to use it and I don't know how to mix all the effects correctly and I don't know the order..so...can you make á beginner tutorial ? A see a lot of buttons but I don't know what I am doing I only try to find the tone by hear but some times is frustrating...!!! 😔
Simple quick and good sounding tone start with the green overdrive pedal tone maxed to 100, drive to zero. Put through your favorite sounding head. Thatll fix your low end.
There are so much videos explaining this. I begun with this reading a lot. When you understand this and train your ear with eq practice you can reproduce any guitar tone you want
Your welcome to join our Bias Fx and Bias Amp facebook group tone, tips and sharing :) facebook.com/groups/biasfx/
Bias Fx '59 Tweed Lux Amp Blues Jam: th-cam.com/video/T1DnA7CLIy4/w-d-xo.html
I could listen to you all day dude
Thank you!
Please dont toast me for this. But can you make a video of making tones on the line 6 spider v. Please. You fkn rock by the way man
Still has that nasty digital hiss that plagues all Positive Grid products.
I was thinking the same thing
I've always used lepou cab with custom IRs and a tube screamer at the front of the chain but I never got satisfactory sounds using bias's amp head sims
It’s easy to remedy if you eq it right and keep the gain at a reasonable level. Worst comes to worst the Celestion impulses or whatever other impulses you want can remedy that
Him boosting 4k didn't help as well lol. But yeah, once people get more into guitar tone they realise Bias stuff actually isn't good. Fine if you just use it to practice with etc but to mix with? No thanks.
Kyle Pierce you cut that in post with lpf.
it's just a thing.
He is so excited about the product, it's almost cartoonish. Seems like a nice dude, but the review is pretty biased.
Wow, the max bundle is about 300$ i can't afford every amp or pedal i love so might as well dig in
A Morales what are you gonna use for a DAW?
@@Undecidedable I'll use reaper, it was 60$ and works great for bedroom musicians and guitar covers which covers my needs
Thanks for replies, I was also thinking about getting this someday.
For that money get a boss katana and you have a real amp with lots of pedals
@Andrei James lol to record the boss katanan you only have to install the drivers and connect to a pc with a usb cable. Cant be easier
Do you use an audio interface with UAD DSP to hear bias in real time without latency? Mainly trying to hear my plugins in real time and not post recording.
That's what I do and it works. Monitoring has no latency.
Hans-Loïc Karrer Do you know if you have to have an interface with UAD DSP in order to monitor the plugins or Is the monitoring capability based on which DAW you have?
@@shawncarnline8451 Monitoring on Reaper DAW
Hey Nik, what bundle did you get ? Standard, Professional or Elite ??
Professional by the looks of it. I've got elite and it has way more presets than Nik's does
I have Bias fx 2 and it's awesome!! Great vid here also!! Thanx for the info!!
Love this video man. More videos like this would be rad!
Thanks Hector!
This is reallly awesome! I think I may make the switch to bias because amplitube has been such a pain in the ass.
I think Nik got lost in the sauce a little bit on the djent section lol. Just turned into a jam sesh for a bit there
Just a bit
Does this come with a pitch shifter to get that Doom sound without having to buy an 8 string?
my biggest question is.. can I play along to songs off my Spotify while using the standalone software? I use a MacBook Pro if that matters.
Keep making videos like these Nik 👌
which version you have ?? standard, professional or elite ?? thanks !
would like to know too
Nice Video Nik
Hi nik, not sure if you’ll see this, but have you got an actual amp as well as the biasfx? Or have you just plugged it into your computer
Sorry for total newb question and Im not sure if you will even see this but how do you record with this? Do you play it through loudspeakers and record it or use some program to record it internally on the computer? hope this makes sense!
Your English is getting much better...your accent is really clearing up.
I don't understand how to connect it to play in real time .. how to connect it do PC or set it. I concected it do my PC via microphone input and nothing but strange noises Can YOU HELP ME PLEASE?! Is there something between PC and guitar? Thanks
Bias fx is great. Amplitube is great. I'm sticking with Bias fx 1 for a while as it does what I want so yay.
I can`t save my new presets that I`ve made ( FX Elite 2 ) !! it asks me to rename and save it, but then nothing happened .. any clue Please :)
I love your videos and this one was really refreshing. Just one suggestion. If you try the tones, you can maybe mute the music in the background so we can hear more of the tone. Keep on going bro!
Thank you, will do!
Is the output speaker a monitor speaker or a guitar amp? Lemme ask, it should sound better on a monitor speaker, right?
Let’s say you have a mac and ipad. can you access on both devices? Or do you have to buy it twice?
lol
me : What about that lead tone though?
Nik : Nice, juicy, buttery lead!
Whatup Nik... Which version of BIAS FX 2 are you using here? Standard, Pro or Elite? Thanks 👊
Well now i know my tones thanks man😉
:D
Sooo do you need an amp for this or just the computer speakers? And is it worth than buying an actual decent amp/pedals?
This or Fortin Nameless just for the metal tone?
To be honest. I might go for the Neural, one of all of them. You can downloaded a demo, all of them, then compare. So you can do for the Bias to. Bias has a much more variety of tones. If you decide Bias your welcome to our group, but for just metal tone you be better off with some of the Neural suite tone. :) I actually have the Archetype Plini, and thats a really game changer. Dont forget, you can actually blend does sims, getting a lot of different tones.
Your welcome to join our Bias Fx and Bias Amp facebook group tone, tips and sharing :) facebook.com/groups/biasfx/
Bias Fx '59 Tweed Lux Amp Blues Jam: th-cam.com/video/T1DnA7CLIy4/w-d-xo.html
I can't get the distortion to go through my headphones, plus I have a second delay from my speakers, help anyone?
Could you try getting doom/sludge/stoner type of sounds? For reference, bands like Sleep, Windhand, Or Pallbearer.
I don't know much about tones in that style of music to be honest
@@NikNocturnal No worries, dude! It's kind of a tonal anomaly anyways. Tune low, play slow, play loud, I guess is a "motto" of sorts lol.
something Orange + something fuzz + bong rip + sllllooooooowwwww
Nice video! Which tier of BIAS FX 2 are you using? Not sure which one to get. Standard, pro or elite?
Still using Bias 1 vst with studio 1. And paired with ownhammer IRs this thing sounds real good. And realy close to many modern metal/djent bands. I know people will argue but i would say properly setuped Bias sounds on pair with axe fx. Or atleast very close. One more thing i want to clarify. It is hard to achieve any modern tones without those ownhammer irs. Dont get me wrong stock sounds is good but not enough.
After listening to Bias 2 djent attemp i have to say they improved stock tones. This new head sounds better than old stock ones. And overall tone is much closer but still irs would do better.
hey, this is great! I am having trouble setting up my USB Audio Interface with the BIAS FX2 Pro. Any tips for me?
Or, would you show your Audio Settings? Thanks!!
Что за музыка на фоне играет? Please tell me what songs play on background
Which version was this? Standard, Professional or Elite?
I just watched the video where you did BFMV's tone, so can I just skip the Metalcore part?
Did you de-ess your voice for this vid? Your s-es keep dropping off -edit- Nevermind I think it's just you facing away from the mic
Wounded MONK I think there‘s a gate. It cuts off the more quiet t‘s
I actually just put the gate on too intense
Can someone tell me how this compares to Amplitude?
Can you please make an in depth video on your bullet for my valentine sound 🙏🏻 also what do use speaker wise for sound, thanks for all ur greatness