ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Freightliner Cascadia Shift Stalk Starter Blocked Error
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- Truck won't start? What is the stalk switch? Why does it tell you to shift to neutral when you already are in neutral? It is super frustrating, but here are some tips to get you through the problem.
Double D Distribution is a Utah based trucking company. We are all truck drivers here at Double D and we want to do all we can to make your trucking career successful and satisfying. Truck drivers are the key to making us a good company so we make videos to empower you to have the resources you need to be a good truck driver. For more info on our company you can check us out at this website: doubleddistribution.com/
I was stuck in the middle of the freeway and this helped me start up my truck. thanks man you saved me
Thanks for posting this. I'm at arest area in Nebraska and mine done this. Cut the power and waited 5 min. Good to go now
9-20-23 & this video just got me moving thanks alot 😁🏆
This video just saved my life!!! It’s 6-11-23 and this video helped me a lot. THANK YOU!
Not mine this is happening to me . I just ordered the new shift stalk . I'm hoping this will fix it.
@@josephgardiner9866I don’t care the video helped me out when I need it. Good luck to you 😂
You Saved $$$$$$ and downtime. May God Bless you. May be while sleeping my hand touched the button and it was ON so turned off and disconnected and it fixed the big issue.
I followed your steps and it worked for me, thanks for doing a good job 👍
Thanks a lot for the info bro I can continue rolling now thanks to you
You saved my ass this morning. Thank you sir !
bro you saved my life i was at a port and my truck would not start lol actual life saver
@@ariel9463 this just happened to me at a port! Lol first time ever.
This worked on a 2016 Freightliner as well, this is wild that this is part of the wiring scheme to block the starter, is switches in the sleeper ...
Thank dear! It worked perfectly for me. Thank you for saving my day
Also same warnings came out on my Cascadia while batteries haven’t hold the charge as they should so after few attempts to start the truck with jumpstart it kick out same sign. Been towed to dealer and while waiting in line decided to install new batteries and there’s a miracle - truck started with first attempt.
You are a life saver bro.
Had this happen in a dock in Columbus, turned off power for 5 minutes and it started up. Got back to yard and company replaced the whole stalk and it happened again. Did the truck you showed and turned off main power for five minutes. Got it to start.
Wow thanks for the help I got it working.
Thank you! It works perfectly!!
Thanks man! Saved me some frustration
Thanks, very helpful
Thanks for the help
You saved my life.. i was at where no road service thanks it works
Thanks
2024 Freightliner don't have that kill switch. Just tried helping a guy, 24000 miles on truck same issue. It eventually resolved itself after he was stuck in door 30 minutes
yep this was helpful for me
You think the hard reset of battery (unconnect cables for 20 min will not remove the message?🙏
Don’t know if this might help but I do not have a Killswitch on my 22 what I did do was put the key on the start position for five minutes turned it to the off position and started back up and it took away the stalk switch right errors
Just saved my life
Worked!!
Will ot stop your accelerator from working ?
7/24
Hey, just used this video yesterday. Pulling those wires worked on clearing the code but it still wouldn't start and the code came back shortly after in my case. I ended up disconnecting/connecting the ground on batteries for a quicker power cycle and that did the trick. The starter activated but it needed a jump at that point which I had with me
Absolute life saver!!
Why does this happen?
I got the same problem, New freightliner I buy😀👏
Did it work?
I tried this too when this happened and it didn’t work. What I did I have 2 keys the one in ignition was key copied. I took it out of the ignition and put the original key in and it started right up
👍
I have same problem my friend it's the starter you have to hit it with hummer it's on the top of the transmission
lol thanks man 😅
My Freight liner Cascade 19 ‘battery died after jumping attempt the same error message popped up “starter blocked”any solution for this model?🙏
Did you get a solution?
@ddtruckdriver
My 2019 Freightliner Cascadia truck turns on perfectly fine and drives . The message pops up and off while driving especially when I hit some bumps in the road/ or even when driving it shows up and then after 2 seconds it goes away the error message. Should I be concerned? Any suggestions, greatly appreciate your responses!
I think you are lucky and it is giving you a warning, yes I definitely think you should get it looked at.
Just clean and tighten your battery's please
It was a big help, thanks!!
Just reset you main power. Reset for 5 to 10 mins. Cycle the key 3 time the fourth start .
If it is just a glitch yes that will work, we talk about that in the video. But if it is an actual switch or other error you have to do other steps.
My truck is brand spanking new and keeps switching into neutral while im driving, mostly around gear 5. It will flash the gears at me and will not go into gear until i stop and switch from drive to neutral and back to drive.
Did you ever find out what the problem was/is?
@@scmarine843 adaptive transmission issue, computer needed to be "relearned" it's basically the transmission getting confused and throwing itself to neutral bc it tries to adapt to the way u drive
@alexhowley9834 I appreciate the response. This just happened to mine last night, so we'll see if the actual issue is the same. We're out here confusing A.I. 😆
@@scmarine843 😂 god damn technology. Make sure you tell them to "relearn" the tranny, try to get it to happen with them plugged in on a test drive. I had to go to 3 different shops before it got fixed. It's not a common issue. Good luck!
@alexhowley9834 I appreciate the info and last question.. expensive?
I'm going through this right now , nothing here is helpful, I believe that I forgot to take it out of nutreal and all the Air leaking out of my system has caused my problems. I left the truck in drive and it leaked all my air out so I can't put it back into netural so now because the truck is leaked almost the air it's not letting me start the truck.
Have fld120 1991. And I’m happy no def no electronic on board no headache 😂
Worked like a charm, thank you sir.🫡