Worked on a 2008 rx400h. Everything works except the trunk button. Is there a way to program that button? It works on the old remote but not on the new programmed ones. I programmed the remote with techstream
Great Video. Helped me alot in many ways. Just for curiosity, is your vehicle is enabled with push to start feature? cause I did not see any instructions like put key in or out.
Good vid. I want to try and see if I can add a 2013 remote fob for my 07 GS450h and I know they have different frequencies. I can use the diagnostic screen to see if the ECU can receive the signal from the new remote then it can probably be programmed, if not I sell it back .
Tried programmed a new used unlock OEM smart key for 2013 Prius, but at the final step after placing a new key next to the power button and beeped, it never registered at the final step after putting it on passenger seat. I suspected a bad used key or low battery voltage? Any advise? I always worked most of the time for other customers(unless the key as bad with it didn't beep at all). It was interested b/c it actually gave me a beep, but not a second beep after placing it on a passenger seat.
Just a couple of questions about non smart keys(2014 Corolla). 1. When you program the 2nd key do you have to put it in the ignition lock with it turned to ignition on, or do you program it with the already programmed original key in the ignition and the new 2nd key in your hand? 2. I have read that new keys will automatically sync to the immobilizer, and I assume used keys returned to virgin status will as well but member "realized" says below that this "does not work to program the transponder chip". If that is the case how is the transponder chip programmed to work? Thanks.
1) Yes you need a working programmed key in order to program a new one. Follow instructions on screen for Key programming. 2) NO, Nothing will automatically sync to the imbolizer
@@pierrel6778 Same Software but I did not make a video for that, but it's pretty similar in the software, just follow the steps. Now if you have a SMART Key, then that's a whole Different thing!!!!
@@IOCaneTech My Prius don't have a smart key. So I might be good. I got the key cut and door lock/unlock programed. Is it still in Main body that I will find that or the transponder has it own ECU ?
@@pierrel6778 I honestly don't remember I have only done it once many years ago, and like I said never did a video on it. But it was pretty easy, just look around in the ECU's until you find it. If I recall the Imobolizer has its own ECU. But again it was like 7 or 8 years ago I did it so I don;t recall. Good luck :)
It's very similar, I don't have a video of it because I don't have a car that needs those keys, so I have no way to make a video of it unless you want to bring your car to me and I can record doing it on your car :)
+funman1steve I did work on 2007 Scion TC to program a transponder chip, but did not work to program the remote buttons. I had to do it the old way open/close door sequence.
+Almaz Isakov IF you have the correct version then it should program that an a vehicle that new. That's it how dealerships program remotes and keys. They don't use door procedures... OR there was an aftermarket system on the vehicle
+funman1steve Oh, right, that could be the issue. How can I make sure I have the right version? I am currently using Software Version 8.10.021. Thanks a lot.
Great video Steve. I have a 2008 tundra. The key fobs will not program with TIS. The diagnostic code does give one single bleep only. Indicating the fobs are talking with the truck just won't program? Any suggestions?
funman1steve Well at this point I am not really sure about anything. It appears to be the correct one. The big difference I noticed on your video is that your car beeps twice to enter programming mode. My truck never gives that indication but does respond to the remote in the diagnostic mode.
IIRC you must be online to use the smart key features. And since it's prolly a hacked copy you can't go online. :( Dealer will prolly have to do that for you.
+Dimitar Naidov That is a whole different procedure and you MUST purchase a SEED CODE from a website to reuse a used FOB. They take a special one time use code to reuse a keyless remote. You can find some limited information on websites like ToyotaNation.com and such but that is VERY tricky and takes special codes. Even DEALERS will not reprogram used smartkeys. If you have a NEW smart key then you can program in Techstream with little to no issues, but used is HIGHLY tricky.
I have a REALLY old Version. I don;t track changes with different versions to know what's best. I just know my version (v8.0) works for everything I need, and it even works on a 2019 Highlander.
Because keys and wireless FOBs are completely different and not even attached to each other. Also my vehicle does not have an imoblizer so I can't show something my vehicle does not have. There is menu options in there if your vehicle is equipped. Do what I did if you have imobilizer, I just played with the software till I figured it out and then made a video to help others.
mackendw Curious - what software - they same used in this video or an additional? If additional, can you provide details? Trying to avoid a $400 charge for an additional 2012 Prius C fob/key.
A client has an issue unlock/lock on Toyota prius 2008. The 2 smart keys start the car with no problem but won't lock/unlock doors. Just to make 2 keys lock/unlock door, what menu do I need to perform?
@@IOCaneTech This is for existing smart key fobs, not without. Will this wireless remote menu available for Toyota prius 2008 smart key push start? Normally for smart keys, it only need one key registration for starting car and lock/unlock doors. So only wireless remote menu is the only good option.
Toyota RAV4 2015 all remote botton/functions on original remote head keys and a new key I have just added are not working. The old remote stopped working in the past base the customer. I used Techstream to add a new key with no issue but unable to erase or register remotes. Need help?
Do you know how to reset a used smart remote? I bought a used smart key to replace a lost one for my 2010 Lexus RX 350, but it needs to be unlocked/reset first. Thank you so much.
my key less entry opens only drivers side door and needs a 2nd key press to open all doors. manual says dealer can program it to open all doors simultaneously. Do u know how it can be done on techstream?
Hi, if I have a hard code for a transmission solenoid that wouldn't clear and the exact same code remained after replacing the transmission could this scanner tool clear it? The one at my local shop could not. Thanks in advance
Don't know you could try but it almost sounds like the ECU or wiring may be at fault instead of the actual transmission. They should also clear if the battery is left unplugged for several hours.
Yes the vehicle syncs to the remote, the remote does not sync to the vehicle. So a used remote is just fine. (Unless you are talking about a Smart Key which is COMPLETELY different!!)
question, I'm trying to do a wireless code registration and when I try to begin the process I get a message saying it failed. Could having the max number of allowed remotes be a cause for that?
@@historyguy77 There is another menu item there to test if the remote signal is detected at all. It's been many years since I got in there but there is a test that shows ANY signal so you can test the remote.
@@IOCaneTechI guess I should have mentioned, 2008 Prius. it has push to start. both keys work to turn the car on, but neither have the ability to wirelessly remote entry or sks. I've been able to manually turn on the security key light, but not test to see if it receives remote signals
This works to program the fob buttons (lock, unlock, trunk, alarm button) but does not work to program the transponder chip. So you cannot Start a car If you use this on a new fob wirh a cut key. Anybody know how to program the transponder?
Hi do you have to Pay online to do programming key on this Software Or make an account, Im try to buy one from eBay but the Review said you have to purchase the account it’s almost like $500 for the whole year I just need to do programming key and remote for my car 2011 camry or it’s free? Please advise thank you
Then something like this "Should" work just fine. Most all of these comes with cracked software so you can run it without paying Toyota $1200 dollars. www.amazon.com/Techstream-Firmware-Software-Diagnostic-Regular/dp/B01M1R409L/ref=sr_1_7?ie=UTF8&qid=1513460198&sr=8-7&keywords=techstream
I’m planning to buy This one from eBay it’s exact same yours but the only things I want to make sure I don’t have to pay a lot of money to make an account and program the key rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F302268796698
Bach Le It has to be a special cable, it's not just any ODBII to USB cable you need the special cable that should have come with the software you bought...
funman1steve I work for Toyota so I can if I get the chance-but it's not very often. I can give you the instructions if you have a specific vehicle in mind though.
Sergio Salinas I would love that! We keep getting asked how to do it in the forums on ToyotaNation.com and no one seems to know how. There's rumors though that it MUST be a legit copy of TIS and must be able to connect to the internet to do Smart keys? I'd be interested in the Highlander Instructions.
+Almaz Isakov Yes it should work, however the procedure for is slightly different for keys but just follow the on screen prompts and you should be good.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Still working in 2023, just programmed the unlock and lock buttons on my wife’s 2016 Corolla using your video. Thanks!
Awesome news!!!
Just want to let you know that this video helps me program new remotes for my 2013 Sienna, bravo!!
Thank you a lot. Seaching around internet for my 2008 RX350 new remote FOB. Tried different methods on youtube None working. You save my days.
Thanks! I watched a lot of videos, but this was the most helpful for getting the Key and remote buttons programs on my 2015 Rav4 (H chip).
Glad I could help :)
Thank you! The right procedure for my 2010 4runner. I was doing the open close door procedure.
Glad it helped you :)
Worked great on my neighbors 2015 Camry. Good stuff.
So the utility is in main body, that was my problem lol, thank you.
Thanks for posting this video. Worked for my 2013 Tundra Platinum. Thumbs up from me.
Wow very informative, but how long ago was this filmed and was a 8mm camera used ? 👍🏼👍🏼👍🏼👍🏼👍🏼 thanks
Filmed and posted over a Decade ago (10 years+), and the TH-cam compression took its toll on top of poor camera quality way back then.
Lol. Had that pic as a background. I wish there was a 1080 version.
There is!! There is even a 4K version. You need to become a member at DigitalBlasphemy.com to download it :)
Worked on a 2008 rx400h. Everything works except the trunk button. Is there a way to program that button? It works on the old remote but not on the new programmed ones. I programmed the remote with techstream
Great Video. Helped me alot in many ways. Just for curiosity, is your vehicle is enabled with push to start feature? cause I did not see any instructions like put key in or out.
+Ahsan Raza No I don't have push to start, You can either start the vehicle or leave the key in the ON position.
Can you program a new key if you lost the original one? I have a 2008 Lexus isf
Good vid. I want to try and see if I can add a 2013 remote fob for my 07 GS450h and I know they have different frequencies. I can use the diagnostic screen to see if the ECU can receive the signal from the new remote then it can probably be programmed, if not I sell it back .
Tried programmed a new used unlock OEM smart key for 2013 Prius, but at the final step after placing a new key next to the power button and beeped, it never registered at the final step after putting it on passenger seat.
I suspected a bad used key or low battery voltage? Any advise?
I always worked most of the time for other customers(unless the key as bad with it didn't beep at all). It was interested b/c it actually gave me a beep, but not a second beep after placing it on a passenger seat.
I put my lexus Es300 key in my Lexus GX470 ignition and now the key won't turn and I can't start the car. Any tips to resolve this?
Great video, can I program a remote start on regular new car
Just a couple of questions about non smart keys(2014 Corolla).
1. When you program the 2nd key do you have to put it in the ignition lock with it turned to ignition on, or do you program it with the already programmed original key in the ignition and the new 2nd key in your hand?
2. I have read that new keys will automatically sync to the immobilizer, and I assume used keys returned to virgin status will as well but member "realized" says below that this "does not work to program the transponder chip". If that is the case how is the transponder chip programmed to work?
Thanks.
1) Yes you need a working programmed key in order to program a new one. Follow instructions on screen for Key programming.
2) NO, Nothing will automatically sync to the imbolizer
have you done the smart key on a Toyota prius with this set up? I have the basic function of starting the car but nothing else
Awesome video, when registering wireless keys , does it also starts car?
No you need to program the imbolizer for that. 2 separate procedures
@@IOCaneTech do you have a link for this new procedure ? Can we do it with the same SW ?
@@pierrel6778 Same Software but I did not make a video for that, but it's pretty similar in the software, just follow the steps. Now if you have a SMART Key, then that's a whole Different thing!!!!
@@IOCaneTech My Prius don't have a smart key. So I might be good. I got the key cut and door lock/unlock programed. Is it still in Main body that I will find that or the transponder has it own ECU ?
@@pierrel6778 I honestly don't remember I have only done it once many years ago, and like I said never did a video on it. But it was pretty easy, just look around in the ECU's until you find it. If I recall the Imobolizer has its own ECU. But again it was like 7 or 8 years ago I did it so I don;t recall.
Good luck :)
is your procedure above completely seperate from the key immoblizer programming? If so, would you make a video showing that process.?
It's very similar, I don't have a video of it because I don't have a car that needs those keys, so I have no way to make a video of it unless you want to bring your car to me and I can record doing it on your car :)
Can I fix odometer using Techstream ? I replaced my old odometer with new one.
Do you know if it has a lexus option? Or it supports toyota only? I'm just curious whether it gives you chance to select lexus models.
Thank you.
Yes toyota lexus scion
@rndinco I'm told this software works on all Lexus, Scion, and Toyota's But I can't test that either way since I don't own those vehicles.
+funman1steve I did work on 2007 Scion TC to program a transponder chip, but did not work to program the remote buttons. I had to do it the old way open/close door sequence.
+Almaz Isakov IF you have the correct version then it should program that an a vehicle that new. That's it how dealerships program remotes and keys. They don't use door procedures... OR there was an aftermarket system on the vehicle
+funman1steve Oh, right, that could be the issue. How can I make sure I have the right version? I am currently using Software Version 8.10.021. Thanks a lot.
+Almaz Isakov I'm currently using Techstream 10.30.029
When i connect my vehicle, i have less yellow tabs than in the video and i don't see main body tab, how and where i can find/do it
Great video Steve. I have a 2008 tundra. The key fobs will not program with TIS. The diagnostic code does give one single bleep only. Indicating the fobs are talking with the truck just won't program? Any suggestions?
Are you 100% positive you have the exact remote correct for your vehicle?
funman1steve Well at this point I am not really sure about anything. It appears to be the correct one. The big difference I noticed on your video is that your car beeps twice to enter programming mode. My truck never gives that indication but does respond to the remote in the diagnostic mode.
any idea how to register a credit card smart key (for Lexus) since it does not have buttons on it? Thanks!
Toyota Innova 2012 model TDS communication problem please tell me how to solve this problem hai how to solution this problem please tell me
IIRC you must be online to use the smart key features.
And since it's prolly a hacked copy you can't go online. :(
Dealer will prolly have to do that for you.
is your techstream firmware 1.4 or 2.0 ? you can find it in mvci
Hi
Any idea how to program used key ? I purchased a spare key off Ebay
I think needs Smartkey reset before add to new car. Lexus IS250
Thank you
+Dimitar Naidov That is a whole different procedure and you MUST purchase a SEED CODE from a website to reuse a used FOB. They take a special one time use code to reuse a keyless remote.
You can find some limited information on websites like ToyotaNation.com and such but that is VERY tricky and takes special codes. Even DEALERS will not reprogram used smartkeys.
If you have a NEW smart key then you can program in Techstream with little to no issues, but used is HIGHLY tricky.
Which version of techstream do you recommend to program the key transponder on a Toyota Land cruiser 2000 100 series?
I have a REALLY old Version. I don;t track changes with different versions to know what's best. I just know my version (v8.0) works for everything I need, and it even works on a 2019 Highlander.
@@IOCaneTech oh ok maybe 2000 is too old but the transponders came out a long time before that
how come you didn't do the immobilizer step to make the key usable?
Because keys and wireless FOBs are completely different and not even attached to each other.
Also my vehicle does not have an imoblizer so I can't show something my vehicle does not have. There is menu options in there if your vehicle is equipped.
Do what I did if you have imobilizer, I just played with the software till I figured it out and then made a video to help others.
Yep...that's what I did...thnx for the great info
Wendell MacKenzie did you find a way to use this software to program the transponder key (aka immobilizer system)?
Bach Le yes, bought the software and used it to do just that
mackendw Curious - what software - they same used in this video or an additional? If additional, can you provide details? Trying to avoid a $400 charge for an additional 2012 Prius C fob/key.
A client has an issue unlock/lock on Toyota prius 2008. The 2 smart keys start the car with no
problem but won't lock/unlock doors.
Just to make 2 keys lock/unlock door, what menu do I need to perform?
This procedure should work
@@IOCaneTech This is for existing smart key fobs, not without. Will this wireless remote menu available for Toyota prius 2008 smart key push start?
Normally for smart keys, it only need one key registration for starting car and lock/unlock doors. So only wireless remote menu is the only good option.
Any idea how to check if the car has a remote start option? Toyota Land cruiser. Thanks.
+rayane454 That is an option added aftermarket (Even if the dealership installs it).
There is no built in remote start option.
+funman1steve thanks for your reply.
Toyota RAV4 2015 all remote botton/functions on original remote head keys and a new key I have just added are not working. The old remote stopped working in the past base the customer.
I used Techstream to add a new key with no issue but unable to erase or register remotes.
Need help?
Are you trying to do SMART keys? (Push to Start)
@@IOCaneTech No just remote head key.
Do you know how to reset a used smart remote? I bought a used smart key to replace a lost one for my 2010 Lexus RX 350, but it needs to be unlocked/reset first. Thank you so much.
That requires you to purchase a seed code, to unlock a used key. Good luck...
my key less entry opens only drivers side door and needs a 2nd key press to open all doors. manual says dealer can program it to open all doors simultaneously. Do u know how it can be done on techstream?
Navin Shenoy, Yes it's VERY easy..
I already have techstream, used it to program immobilizer keys.What r the steps to make all doors unlock simultaneously?
Navin Shenoy it's in the customizable features menu
funman1steve thx will look at that
Hi, if I have a hard code for a transmission solenoid that wouldn't clear and the exact same code remained after replacing the transmission could this scanner tool clear it? The one at my local shop could not. Thanks in advance
Don't know you could try but it almost sounds like the ECU or wiring may be at fault instead of the actual transmission.
They should also clear if the battery is left unplugged for several hours.
Just look for "TIS Techstream" on ebay?
Do you think a already programmed fob from a different vehicle can be erased and programmed to your car?
Yes the vehicle syncs to the remote, the remote does not sync to the vehicle. So a used remote is just fine. (Unless you are talking about a Smart Key which is COMPLETELY different!!)
How did you connect your computer to the car? Did you use a USB cable?
The software comes with a USB to OBDII Cable you need.
question, I'm trying to do a wireless code registration and when I try to begin the process I get a message saying it failed. Could having the max number of allowed remotes be a cause for that?
Possible. How many are programmed?
I get the same error. It fails immediately in registration, erasure, or diagnostic. I don't get to the part that says how many codes are stored
I have been unable to do this. do i need a master key? i just have two keys that both only work for the immobilized
Are you trying to do a smart key or? Are you trying to do the wireless door locks?
@@IOCaneTech Just the wireless door locks. I've tried doing it but it doesn't work every time I try it
@@historyguy77 There is another menu item there to test if the remote signal is detected at all. It's been many years since I got in there but there is a test that shows ANY signal so you can test the remote.
@@IOCaneTechI guess I should have mentioned, 2008 Prius. it has push to start. both keys work to turn the car on, but neither have the ability to wirelessly remote entry or sks. I've been able to manually turn on the security key light, but not test to see if it receives remote signals
@@historyguy77 Yes, push to start, so Smart key.
This procedure will not work with Smart Keys. :(
This works to program the fob buttons (lock, unlock, trunk, alarm button) but does not work to program the transponder chip. So you cannot Start a car If you use this on a new fob wirh a cut key.
Anybody know how to program the transponder?
Hi do you have to Pay online to do programming key on this Software Or make an account, Im try to buy one from eBay but the Review said you have to purchase the account it’s almost like $500 for the whole year I just need to do programming key and remote for my car 2011 camry
or it’s free?
Please advise thank you
Are you trying to do Smart Key (Push to Start) or just regular chipped Keys with wireless remote?
Just a regular key with the button in the key
Then something like this "Should" work just fine.
Most all of these comes with cracked software so you can run it without paying Toyota $1200 dollars.
www.amazon.com/Techstream-Firmware-Software-Diagnostic-Regular/dp/B01M1R409L/ref=sr_1_7?ie=UTF8&qid=1513460198&sr=8-7&keywords=techstream
I’m planning to buy This one from eBay it’s exact same yours but the only things I want to make sure I don’t have to pay a lot of money to make an account and program the key
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F302268796698
Thank you for your help I really appreciate you
is this for the key fob that is attached to the key ? or is the processes the same for both key styles ?
The process is the same for both styles. Except smartkeys (push to start)
@@IOCaneTech cool, thank you !
i tried to program my remote but when i press lock and unlock , nothing happen after the count down in techstream is done !
Then your remote battery is dead, or your remote is broken, or you have the wrong remote. Not any Toyota remote will program to any Toyota vehicle...
@@IOCaneTech or you are not using the master key
@@muhouston you don't need a master key to do this
@@IOCaneTech with only valet key, TIS doesn't show the body tab at all
When do you know when to put 'Smart Key'
This has nothing to do with a Smart Key. That would be an entirely different video and instructions.
Do you have any idea if the techstream has the ability to turn off the seat belt alarm on a 14.5 Camry se
Yes it can do that.
yes - drivers and passengers
Hi, I would like to program my highlander 2010 remote, could you send me the techstream link on eBay please, thank
Ehh no.... You can look on ebay just as easy as I can lol.. It's also on Amazon. Make sure to get a 64 bit copy so it works with Windows 10
Would this work for a 2021 4Runner? I’m on a road trip and lost the key fob and don’t have access to the spare
Do you have a smart key?
Also you need a key to make a key so.. if you have no keys this won't help you
@@IOCaneTech smart key yes. I have nothing :(
@@lorenroot7667 Yep, you are out of luck, need a locksmith or dealer to help you now.
can this software help me with both transponder and remote programming?
Bach Le
Yes
funman1steve I heard there is a $5000+ version of Techstream. So how is it different from your PC version (which we can get from eBay)?
Bach Le *Cough* the version on Ebay and Amazon is a pirated copy of the $5000 version *Cough*
This is THE EXACT SAME software the dealerships use.
funman1steve haha thanks for that. Look like you are coughing a lot. I found one, now just need to get a low price of OBDII-Laptop cord LOL
Bach Le It has to be a special cable, it's not just any ODBII to USB cable you need the special cable that should have come with the software you bought...
its should work in toyota 2013seinna
how do you do this with a smart key / push button start? There's nowhere to insert a key into the ignition.
I have no clue, I don't have a vehicle with a start button :(
funman1steve There's a code on the back of the key fob, and you hold the fob up to the power button
Sergio Salinas
Care to make us a video of how to use TIS for this? :)
funman1steve I work for Toyota so I can if I get the chance-but it's not very often. I can give you the instructions if you have a specific vehicle in mind though.
Sergio Salinas
I would love that!
We keep getting asked how to do it in the forums on ToyotaNation.com and no one seems to know how. There's rumors though that it MUST be a legit copy of TIS and must be able to connect to the internet to do Smart keys?
I'd be interested in the Highlander Instructions.
Do you know how to programm a 2013 Scion Frs key?
Yep.. Pretty much the same process but you go into a different menu for keys.. As long as it's not push to start FOBs. Those are a PAIN...
I lost the key to the program help me get Ola key
Can you program a 4C chip key with this?
+Almaz Isak What is a 4C key?
What vehicle do you have?
+funman1steve it's a 2000 Lexus LX470
+Almaz Isakov Yes it should work, however the procedure for is slightly different for keys but just follow the on screen prompts and you should be good.
+funman1steve Thanks a lot for quick responses. I will definitely try out once I receive the keys.
nice
есть в более хуевом качестве?