Just fixed mine but holy cow it’s really hard to put that bit in place. I’ve got it but it’s leaking so here I go again 😮💨 any advice how to put it together without moving the rubber part?
@@MayaraBritoDoceCrochet well first off congrats on fixing it, now for the rubber part, im not going to lie that was probably the hardest part, but I'd held it light with a flathead screwdriver easily (as in gently) put it back together. Wish I had an easy way to put it back together. Good luck.
@@gulysgarageyour video is amazing truly but gosh I wish you could make a video to show how you did this part…I’m so done for today I’m gonna try to fix it tomorrow and will come back to tell you if I’ve got it or not
@MayaraBritoDoceCrochet sometimes you just need to take a break, hopefully you'll go back tomorrow and it just drops right in place. And thank you, I appreciate you!
@@gulysgarage I managed to get it back in place without leaks 🙏🏻 it took me a couple of tries but now the machine is perfectly functioning. Thank you. Just want to leave my advice here for whoever is having the same issue with the leaking… pay attention if you’re putting the rubber back in place on the right side as I noticed I made this mistake at the first try Secondly, place the rubber part first and use something thin to push the rubber back in place, then hold it with a tool like a small screwdriver. My husband ended up helping me while I was holding it he pull the plastic bit back in place so if you have another person to help you out it’s easier Thanks again Guly for your helpful video
@MayaraBritoDoceCrochet That's awesome! I'm glad it worked out. And yea sometimes you just need to take a step back for a little while and tackle with renewed patience lol
It’s me again 🥴 so I fixed error 4 and now it’s showing me error 6 “when you add hot water to the tank” Do you think that it can be related to the fuse? I swear I’ve got the exactly same fuse that it was in the machine but I guess it’s heating up too much. Any advice? 😅😢
@MayaraBritoDoceCrochet oh nooo, sorry to hear that. I haven't had a problem since replacing the fuse the first time *fingers crossed* I hope it works out better for you this time
@XxTanttxX I'm sorry to hear that. Yea getting the seal back on is the correct position was probably the toughest part. Take your time and maybe use a tool to hold it in place while installing the heating plate.
Just fixed mine but holy cow it’s really hard to put that bit in place.
I’ve got it but it’s leaking so here I go again 😮💨 any advice how to put it together without moving the rubber part?
@@MayaraBritoDoceCrochet well first off congrats on fixing it, now for the rubber part, im not going to lie that was probably the hardest part, but I'd held it light with a flathead screwdriver easily (as in gently) put it back together. Wish I had an easy way to put it back together. Good luck.
@@gulysgarageyour video is amazing truly but gosh I wish you could make a video to show how you did this part…I’m so done for today I’m gonna try to fix it tomorrow and will come back to tell you if I’ve got it or not
@MayaraBritoDoceCrochet sometimes you just need to take a break, hopefully you'll go back tomorrow and it just drops right in place. And thank you, I appreciate you!
@@gulysgarage I managed to get it back in place without leaks 🙏🏻 it took me a couple of tries but now the machine is perfectly functioning. Thank you.
Just want to leave my advice here for whoever is having the same issue with the leaking… pay attention if you’re putting the rubber back in place on the right side as I noticed I made this mistake at the first try
Secondly, place the rubber part first and use something thin to push the rubber back in place, then hold it with a tool like a small screwdriver. My husband ended up helping me while I was holding it he pull the plastic bit back in place so if you have another person to help you out it’s easier
Thanks again Guly for your helpful video
@MayaraBritoDoceCrochet That's awesome! I'm glad it worked out. And yea sometimes you just need to take a step back for a little while and tackle with renewed patience lol
E6 is for us, i drained it twice. even i put in room temp the water temp setting, it keeps on boiling few minutes once plug in,
It’s me again 🥴 so I fixed error 4 and now it’s showing me error 6 “when you add hot water to the tank”
Do you think that it can be related to the fuse? I swear I’ve got the exactly same fuse that it was in the machine but I guess it’s heating up too much. Any advice? 😅😢
@@MayaraBritoDoceCrochet are you adding warm water to the tank or room temp water? I have not gotten that code
@ room temperature always but guess what? Today it showed again E4 and the water is not heating up 😮💨 here I go again to replace the fuse 🙏🏻
@MayaraBritoDoceCrochet oh nooo, sorry to hear that. I haven't had a problem since replacing the fuse the first time *fingers crossed* I hope it works out better for you this time
E6是注入的水太热了，我遇到过这种情况。您换成凉水试试。
Make sure the black spot on the fuse is pointed toward the connector, not toward the heating element.
This solves my problem but I can’t get the heating plate back in with the seal seated correctly; mine keeps leaking now sadly
@XxTanttxX I'm sorry to hear that. Yea getting the seal back on is the correct position was probably the toughest part. Take your time and maybe use a tool to hold it in place while installing the heating plate.
Hi can I use any fuse? The link provided is not working for me.
@oliviacodner5568 BOJACK SF76E SEFUSE 10A 250V Thermal Fuses 77 Degrees Celsius Thermal Cutoffs (Pack of 10 pcs) a.co/d/6Wce046 try this
@oliviacodner5568 i hope that link works for you.
Thank you it did