Thanks for the video! My sister has one of these machines and she lives overseas. I’m visiting her and noticed the machine wasn’t wking. Fuse unavailable around here. I jumped it and voila!
Video was great in how to taking things a part. I sadly couldn't fix mine as I didn't know how to solder and ended up wrapping the old fuse wire with the new fuse wire and it didn't work.
Note, you do NOT have to cut the white insulating wrap or the fuse out. - Undo the nut holding the wire to the heating plate - Peel back the white insulating wrap from the end connected to the heating plate - Squeeze the terminal on the heating plate from the sides (thin side) lightly with a pair of pliers and pull the connector from the spade on the heating element - This now gives you space to pull the white insulating wrap all the way back, exposing the fuse - The fuse itself is held in via two gold colored crimps - Squeeze the sides of the crimps, this should relieve tension and allow you simply pull the fuse from the crimp - Replace the fuse by pushing it into crimp and crimping with a pair of pliers You can check if the use is blown by using an Ohm meter and checking for continuity before and after the fuse (would suggest doing this with new fuses to ensure they're not DOA from factory).
Merhaba.Emeğiniz için teşekkür ederim.Amarikada 110 wolt ile çalışır.Ancak Türkiye'nin 220 wolt olduğundan ve bu woltajla çalıştırmada Rezistansın arızalanması olurmu. Benim sorunum var. 1- kaç wolt ile çalışır. 2- Rezistansını nereden temin ederim.
I'm not sure about the exact resistor you would need for 220 volts. If you can identify the specifications of the resistor already in your Baby Brezza, I would try to find an exact match online and put that one in.
Thank you for posting this step by step video. I was able to fix my baby brezza!! It took 3 days to do so, but it works and I’m so happy!
Magnifique, merci pour cette réparation pas a pas, très claire et didactique. Super travail.
Thank you very much for your video and time, it really helped me. Fixed mine with the same problem
Thank you! It works now!
Thanks for the video! My sister has one of these machines and she lives overseas. I’m visiting her and noticed the machine wasn’t wking. Fuse unavailable around here. I jumped it and voila!
Thank you for the video,I have the same problem
Video was great in how to taking things a part. I sadly couldn't fix mine as I didn't know how to solder and ended up wrapping the old fuse wire with the new fuse wire and it didn't work.
Hi dear. Thank you for posting this video. I have a question where can i buy the replacement for the heater?
I'm not sure. Maybe eBay? Good luck!
Hi, i found it on amazon. Thank you
Note, you do NOT have to cut the white insulating wrap or the fuse out.
- Undo the nut holding the wire to the heating plate
- Peel back the white insulating wrap from the end connected to the heating plate
- Squeeze the terminal on the heating plate from the sides (thin side) lightly with a pair of pliers and pull the connector from the spade on the heating element
- This now gives you space to pull the white insulating wrap all the way back, exposing the fuse
- The fuse itself is held in via two gold colored crimps
- Squeeze the sides of the crimps, this should relieve tension and allow you simply pull the fuse from the crimp
- Replace the fuse by pushing it into crimp and crimping with a pair of pliers
You can check if the use is blown by using an Ohm meter and checking for continuity before and after the fuse (would suggest doing this with new fuses to ensure they're not DOA from factory).
Hi can share link for the fuse ?
This fixed my problem but I now I can’t seem to get the heating plate back in with a good seal; mine keeps leaking now sadly
Merhaba.Emeğiniz için teşekkür ederim.Amarikada 110 wolt ile çalışır.Ancak Türkiye'nin 220 wolt olduğundan ve bu woltajla çalıştırmada Rezistansın arızalanması olurmu.
Benim sorunum var.
1- kaç wolt ile çalışır.
2- Rezistansını nereden temin ederim.
I'm not sure about the exact resistor you would need for 220 volts. If you can identify the specifications of the resistor already in your Baby Brezza, I would try to find an exact match online and put that one in.