there wouldnt be much there tbh, white smoke is water in the engine.... but here its just hot air coming out into the cold temerature. kinda like how you breathe out an fog cold windows...
in actuality, having the exhaust of all the cylinders sync reduces the sound since the peaks and valleys of the pulses cancel them self out, after you can add a chamber that tunes the frequency lower, say a 3rd order, then the resonator to reduce the remaining high frequency and the droning and finally a single muffler to reduce the overall sound, the entire system, would be one resonator and 2 mufflers in series tied to a heather with an expansion chamber to lower the velocity before the resonator. practically complete quiet and much, much less bulk.
Modern super cars: "Our new, advanced futuristic rear-top exit exhausts are the pinacle of technology and effeciency" Garage 54: "Im about to end these mans's careers"
The quieter the car becomes, the more back pressure it has, which is not good for engine's performance. I guess if you want a very quiet car, you can have many mufflers, if theres enough room underbody to fit them. The less back pressure, the better the engine's performance. Better the engine's performance, the better the drive. Also the fewer bend(s) the exhaust pipe has, the better, since there is less restrictions and less time delay getting the exhaust fumes out, and that's a good thing. The best bend(s) is no bend(s) at all, but if must have the bend(s), make sure its mandrel bend(s), mandrel bend(s) is the 2nd best type of bend(s). Bend(s) to the pipe adds back pressure and more delay to the exhaust fumes coming out.
@@theroyalcrownedtiger2946 Engine needs a certain amount of backpressure. Expecially the low compression motor. But of course, what he did there was ridiculous lol.
He totally missed that a lot of noise is being emitted from the intake. A lot of newer cars have a resonator built into the air cleaner box. This older car in the video has a very short distance from the carb to the cylinders, resulting in more noise. They should’ve mounted mufflers to the intake as well
Wow, an ultra-wide video! Not even the largest channels can get this one right. It's amazing to see how the production quality has improved over the last 6-8 months. Keep it going guys, I look forward to seeing what the future brings for this channel :)
The Bushwacker oh, its on one of those little gyro mount thingies that remove all shake from the camera, his hand is moving a fuckton meanwhile the camera is smooth via.... well i dont really know, but you can google it. Just look up “anti shake camera mount” or something
@7:32 "If only everybody would drive around with a similar system. You wouldn't hear the cars coming." - The pedestrians not hearing the cars, and the drivers not seeing the pedestrians. Sounds great!
i am not an acoustic engineer but this kind of thing fascinates me. i think doing a header into a single exhaust with 2 (or 9) mufflers would have been quieter.
2 years ago, I connected my garden hose (30 meters long) to my Honda CBR-600's exhaust. It sounded like a 50cc engine at 500 rpm. It was really quiet. At the end of the hose, it sounded like an idling rotary engine.
@@irgant Had to translate that using Google but no, i will not pay BMI with my own money to translate it, i'll just watch it on their Russian channel with subtitles or not, either way it's gonna be fine :)
Routing cylinders to separate mufflers will worsen the problem. When you have one muffler per cylinder, you have massive short-term pressure increases within the muffler. Since sound is essentially pressure variation, these sudden huge jumps in pressure will be very noisy. I.e, you need to keep the pressure as consistent as possible to reduce sound. Mufflers try to even out these pressure spikes with internal baffles to reflect and disperse the pressure wave, but there's only so much they can do. You need to do the best you can at the inlet to the muffler. Routing all cylinders through a single muffler creates far more consistent pressure entering the muffler since the exhaust strokes are staggered and therefore the pressure spikes are more frequent giving the overall pressure less time to decay and thus less pressure variation on the next exhaust stroke.
@PaцḶєє BlцєṢтяєєт actually i don't really care about it cause I'm too fat to walk out so I don't have contact with some debil humans who don't know what hygiens are
I think the pipes are too wide with this set up they should try half inch pipe from each cylinder, I'm just guessing that's a lot of work just becuase of the amount of custom fabrication to make the pipe fit into each of the mufflers.
Wow! Most creative, ideas trying people. I love it. Great work!! Raw and Brutal. Mentioning how the cams the roller rockers Springs everything else will be making noise I'd like to see an update where you dine and insulate the engine bay bottom side and top and try to make the car totally like electric even quieter than the electric motor. YES!
Hey, you should put sound insulation all around the motor, attach a few the super quiet Honda mufflers, and design and make a fully baffled muffler with fiberglass insulation and point the exhaust straight down. (Straight down seems to be quieter.). And I LOVE this channel. Love the things you make and do. It’s all very interesting.
When the exhaust is completely quiet you will hear that poor car saying "kill me".
oh they will......
It will be a long whisper.
@@DesertSessions93 but a silent whisper for sure
It's like that mutated baby whispering...KILL ME...KILL ME...
Actually its gonna try to speak "edu ardo".
Wow that exhaust is a little over the top.😉
Get out lol
👌😂👍lmfao!
Ahahahhaaha
It's all over the top. Rofl!!! Official Spetnatz low profile exhaust system.
Wow
World - in complete panic
Garage 54 - let's make the world's quietest car!
Well Russia didn't have globalist idiots keeping their boarders open.
@@dickJohnsonpeter yep, our leader is an idiot
Sloonz Lel so we need a socialist cool idea!!
Matt Gordon u need quiet car to steal toilet paper
Sloonz Lel cool vote away
The Americans have Boston Dynamics. The Russians have, well, these guys.
Keep the 69 likes
I love this comment lol
MrZetor and the Australians have Mighty Car Mods
@@lukmanfirdaus8497 420 likes hahaha
Well maybe in russin this kind of car is legal on street... they need heat on their glass
You should connect all mufflers u got into one massive pipe for All cylinders so the Gases go through All of them
Yes, connect them serially.
Totally I agreed there dude.👍
Yes I agree, a 4 into 1 header, then 9 inline mufflers
And 4 the mufler tip. Use a trompet, musical exhaust system
Rout the pipes to the roof and connect the mufflers together there; that way you can still see out the windshield. Plus, the roof would be heated!
I see the russian spy program is coming along nicely
Spy kids 3
Stealth Lada program
Besides that funny joke the russians had some good spy and spay gadgets in the KGB
Well you know... Stuck that moon landing 🤣
@Awakening Enthusiast Drugs R Bad, mmmkay?
Breathing in exhaust fumes. "This is so nice"
tyler bonser 69 is nice to
I laughed way too hard at this 😂
Silent smoke - don't breath this!
there wouldnt be much there tbh, white smoke is water in the engine.... but here its just hot air coming out into the cold temerature. kinda like how you breathe out an fog cold windows...
@@tomdixko8900 guess you've never heard of carbon monoxide.
The world: *corona virus!*
Russia: *9 MUFFLERS*
350 likes no reply NANI!!
On the loudest exhaust idea, just make a huge steel cone for each cylinder and you're done...
Len Gaming you might as well just not have anything. Either way it will burn valves..
Put all the exhaust into a single whistle
Colinfurze did that
@@lolbosss Ouch.
@@christiangraham4579 sodium filled valves and a large bell end exhaust and you're golden
The announcer is so good that you can hear his hangover is translated through
What
California: it’s still too loud
Neh. I live in California and there is this person riding a scary loud gas motorized scooter and nobody really cared.
@@auggatronicRoblox_official nobody cares until you hit the karen neighborhoods
@@deadplaya Yeah, that is true.
in actuality, having the exhaust of all the cylinders sync reduces the sound since the peaks and valleys of the pulses cancel them self out, after you can add a chamber that tunes the frequency lower, say a 3rd order, then the resonator to reduce the remaining high frequency and the droning and finally a single muffler to reduce the overall sound, the entire system, would be one resonator and 2 mufflers in series tied to a heather with an expansion chamber to lower the velocity before the resonator. practically complete quiet and much, much less bulk.
Mad Max: Cyka Road
More like Mild Max with that exhaust system
[Тaz] 14K. Bosozoku: Cheeki Breeki Edition. In other words Blyatsozoku! 😂😂😂😂😂
m 88 Mad Vlad
no
Crazy Ivan*
When you think you've seen it all..
These folk never let you down..
I love it
check 'Mastermilo' his channel, you will love it ^^
@@aorta538 the rollgolf lol
@@isaacsanchez7317 Garage 54 did visit Marstermilo and made some video's toghether :)
@@aorta538 ohh really?
@@aorta538 Any links? That sounds like a blast to watch!
You guys deserve more credit. So many people copying you guys now and have gained a lot more traction . But you guys are the OGs of this genre
Modern super cars: "Our new, advanced futuristic rear-top exit exhausts are the pinacle of technology and effeciency"
Garage 54: "Im about to end these mans's careers"
You see Ivan, the more mufflers you have, the quieter the car gets
The quieter the car becomes, the more back pressure it has, which is not good for engine's performance.
I guess if you want a very quiet car, you can have many mufflers, if theres enough room underbody to fit them.
The less back pressure, the better the engine's performance.
Better the engine's performance, the better the drive.
Also the fewer bend(s) the exhaust pipe has, the better, since there is less restrictions and less time delay getting the exhaust fumes out, and that's a good thing.
The best bend(s) is no bend(s) at all, but if must have the bend(s), make sure its mandrel bend(s), mandrel bend(s) is the 2nd best type of bend(s).
Bend(s) to the pipe adds back pressure and more delay to the exhaust fumes coming out.
The Royal Crowned Tiger ok smart one.
@@brandonlewis7166 : Thank You 👍
@@theroyalcrownedtiger2946 Engine needs a certain amount of backpressure. Expecially the low compression motor. But of course, what he did there was ridiculous lol.
@@RideOrangeKTM 4 stroke doesn't need back pressure it needs exhaust scavenging. Check this video out
th-cam.com/video/A2G1EOB4P3w/w-d-xo.html
Russian men make an electric car without the electric (colourized)
Your picture creeps me out
He totally missed that a lot of noise is being emitted from the intake. A lot of newer cars have a resonator built into the air cleaner box. This older car in the video has a very short distance from the carb to the cylinders, resulting in more noise. They should’ve mounted mufflers to the intake as well
Correct, and connecting mufflers in series instead paralel
also the hood was off. put a hood on and that’ll half the sound easily lmao
Wow, an ultra-wide video! Not even the largest channels can get this one right. It's amazing to see how the production quality has improved over the last 6-8 months. Keep it going guys, I look forward to seeing what the future brings for this channel :)
8:23 go camera man lol
I see..
LoL
Camera man here folks!
@@bitchinflexin STUNTMAN REVV IT UP
bitchin flexin yes sir 😂
The Bushwacker oh, its on one of those little gyro mount thingies that remove all shake from the camera, his hand is moving a fuckton meanwhile the camera is smooth via.... well i dont really know, but you can google it. Just look up “anti shake camera mount” or something
Fill the engine bay with expanding foam
@PaцḶєє BlцєṢтяєєт dis vir poes soek
freezeme360 Already a subscriber 👍🏻
Gives a new meaning to: "overflow".
Me driving this thing into my yard
”Are you happy now mom!?”
Turn the exhaust into a tuba : D
The Bushwacker have a computer play certain notes while you’re driving, just smooth jazz coming out the back of your lada
350z did that actually
Trumpets :D
They really exhausted all of the possibilities on this one.
add 20 catalytic converter in line and she how clean you can get !
They need heat to work so isn't going to work well at all.
tyler bonser then heat it up lol
tyler bonser attach a blowtorch to each cata, that’ll solve your problem
I just found this Account and I have to say I´m 100% entertained. Keep it up, Guys!
“Making the quietest exhaust ever”
Bugatti Veyron: *wind noises*
song at minute 4:00 is A P O L L O, Timothy Infinite - Trending
Wisky Mo ok
Makes me happy to see I'm not the only guy out here welding exhaust with flux core mig
Literally the best car channel on TH-cam, these experiments are insane and I love it
Next week each cylinder will have its own turbo lol
th-cam.com/video/tAcCq6eWhSY/w-d-xo.html hehe :D
@7:32 "If only everybody would drive around with a similar system. You wouldn't hear the cars coming." - The pedestrians not hearing the cars, and the drivers not seeing the pedestrians. Sounds great!
Tires still make noises
Greetings from the international space station !
"The exhaust is so quiet", just huge bangs where mufflers hit roof 😁😁 Love your content thanks
when daddy Vlad calls you fella 😍😍😍
How about soundproofing the engine bay and a soundproofed hood? Make that engine quiet!
The muffler per cylinder job was cool but I think having all 4 into 1 pipe has noise cancelling abilities. Love the ideas!
i am not an acoustic engineer but this kind of thing fascinates me. i think doing a header into a single exhaust with 2 (or 9) mufflers would have been quieter.
That was absolutely exhausting...😏
Oh to be silenced by a muff lol
@@statementleaver8095
Earmuffs... threesome!🤣
@@louisbecker5941 'Threesome' this is accelerating fast.
Could be a chance of being revved up here hope I don't gass out lol
Popcorn maker? I never saw that video in my subscriptions.
2 years ago, I connected my garden hose (30 meters long) to my Honda CBR-600's exhaust. It sounded like a 50cc engine at 500 rpm. It was really quiet. At the end of the hose, it sounded like an idling rotary engine.
Dude that's pretty cool lol
You guys are nuts. If I was a neighbor I think I'd love waiting to see what drives down the street next!
Hey wait, we don't get to see the popcorn video ?!
Is it just on their non-translated channel ? O.o
There are a few on the original channel that were never translated. Hopefully one day they'll be done.
Or I'll learn Russian.
@@rci-9160 Let's all flood BMI Russian's channel with translations requests xD
@@irgant Had to translate that using Google but no, i will not pay BMI with my own money to translate it, i'll just watch it on their Russian channel with subtitles or not, either way it's gonna be fine :)
I'd love to see this same experiment on an 8 cylinder engine. That would be super cool to see. *:-)*
Nah with the 8 cylinder go loud! A 12 inch glasspack per cylinder!
tom cline that is a wonderful idea
This channel makes me laugh, man. Excellent.
Routing cylinders to separate mufflers will worsen the problem.
When you have one muffler per cylinder, you have massive short-term pressure increases within the muffler. Since sound is essentially pressure variation, these sudden huge jumps in pressure will be very noisy. I.e, you need to keep the pressure as consistent as possible to reduce sound. Mufflers try to even out these pressure spikes with internal baffles to reflect and disperse the pressure wave, but there's only so much they can do. You need to do the best you can at the inlet to the muffler.
Routing all cylinders through a single muffler creates far more consistent pressure entering the muffler since the exhaust strokes are staggered and therefore the pressure spikes are more frequent giving the overall pressure less time to decay and thus less pressure variation on the next exhaust stroke.
Thanks a lot to BMI Russian!! 👏👏👏😉😉😉
“Carburetter” LOL
Thanks for the English voice overs, super interesting ideas on this channel.
You guys are crazy!! I love it!!
That's what I call a recipe to treat the corona virus, Muffler Popcorn 😂
@PaцḶєє BlцєṢтяєєт actually i don't really care about it cause I'm too fat to walk out so I don't have contact with some debil humans who don't know what hygiens are
8:25 shout out to the guy running on snow looking backwards holding a camera!
The easy way to isolate each cylinder for some quick troubleshooting. You guys are great.
That is a great experiment! It surprises me that the last muffler added made the most noticeable improvement in sound reduction. Great show!
I wanna know what happens if you get that revving to red-line and pour sand down the carb...
Check out the neutral drop channel. "What's it got STUNTMAN!"
It’s still pretty loud
I think the pipes are too wide with this set up they should try half inch pipe from each cylinder, I'm just guessing that's a lot of work just becuase of the amount of custom fabrication to make the pipe fit into each of the mufflers.
It's a chunky worn out 4 banger, its always going to make a ton of noise.
@@SerPurple51 I have 2 banger old school fiat it runs like a tractor bruh
Absolutely fantastic! So much better than top gear.
Goes over the top and even adds in resonators lol I love this guy
please try a 2stroke exhaust from a motorcycle on a car
Probably lost 80% of whatever little horspower that car had in the first place
Dariune 80% of nothing is still nothing
Dariune Was thinking’s this as well... poor car haha
So its down to 3 meercat-power?
This man just may possibly one of the maddest lads I've seen
I can't help but chuckle seeing this glorious monstrosity driving around. xD
This channel cracks me up.
What if all cars had exhaust on top😂
Modern car companies: PRAISE THE MESSIAH
BRAVO my far away HOT ROD friends! You never fail to entertain.... (This channel is more fun than ROADKILL and TOP GEAR combined)
Wow! Most creative, ideas trying people. I love it. Great work!! Raw and Brutal. Mentioning how the cams the roller rockers Springs everything else will be making noise I'd like to see an update where you dine and insulate the engine bay bottom side and top and try to make the car totally like electric even quieter than the electric motor. YES!
4:03 Mazda RX-8 stock muffler
Noticed that aswell, i also have an RX-8
@@FlubbedCypress9 Hey Buddy :)
I also noticed 😂
Another great video from the nuttiest Russians on youtube.
Check the stance volga project by tom hanson (guy from russia) :)
This video is going to sound amazing
thank you so much for translating these videos!
7:22 skyline in the background?
Yup, looks like an r32 sedan
Hey, you should put sound insulation all around the motor, attach a few the super quiet Honda mufflers, and design and make a fully baffled muffler with fiberglass insulation and point the exhaust straight down. (Straight down seems to be quieter.).
And I LOVE this channel. Love the things you make and do. It’s all very interesting.
Love the show, longtime subscriber, BMI Russian, carbur-ā-tor. Great stuff, this just kills me😅
Hello from prince Edward island canada
Love the show!
This is my new favorite channel
You guys are crazy lol keep up the good work all that back pressure must be killing the engine hp :-)
The best channel ever!!!
When your car air intake system sounds so nice, this is the kind of exhaust setup it needs 😁
Those crazy Rooskies! :)
Truly the most awesome Fiat Uno ever built. Beautiful.
I love the popcorn still in the pipes from last experiment
A long horn shape should do the trick for the loud exhaust 😊
Appreciating the wide screen format!
You makes my dream comes true. Thanks a lot.
The back pressure must be incredible.
4 into 2 into 1 header. Liked the megaphone one.
I like this. Refreshingly different than the loud muffler or straight pipe norm
All those mufflers going up and over the top of the car. Best car mod ever! +10HP!
i know art when i see it.
this is art.
Listening to this nine muffler car may be the cure for Corona 😂😂😂
Kevin from America I love this channel lots of fun
Nice. Every car should be quiet :)
This guy does everything I think about in the shower
Carpet / rug tread on some wheels/tires in the snow, on ice vs studs or snow tires?
R32 Skyline outside, cool!
These guy are great.
what would happen if you ran the exhaust gasses straight back into the intake would the engine run
I LOVE quiet cars!!