For the rangefinder, I drilled two small holes on the top, glued red acetate to the underside, glued a magnet to the underside (off set) and placed a small LED light on the magnet. Purchased a bag of 20 from Hobby Loby. My rangefinder now lights up!!
Hello, with the table to calculate the circumference of the skull, do you leave a little space between the helmet and the head ? For example, if I'm 22'' around the head, do I take 22'' or just above to leave a little space so as not to have the helmet too close to the head ? Thanks.
For some reason can't get 8mm foam around here easily. Would it be better do the main helmet parts from a thicker 10mm foam, or would thinner 5mm or 6mm be fine?
The 2 things that are different are the cheek insets and the ear details. The base of the helmet is the same. Contact cement is much faster to work with and creates a much stronger connection.
Now we need a bo katan whole costume
Right? I might make it. I just want to see if there's enough demand for it :)
Trust me...there's more than enough demand. You should do this!!!
Oh yes, there is definitely a demand! There absolutely needs to be templates for a Mandalorian armor that corresponds to female body shapes.
For the rangefinder, I drilled two small holes on the top, glued red acetate to the underside, glued a magnet to the underside (off set) and placed a small LED light on the magnet. Purchased a bag of 20 from Hobby Loby. My rangefinder now lights up!!
Sounds awesome. Did the magnet turn the led on/off?
Just seeing the thumbnail made me buy it. Another great build!
Awesome! Thanks for the support :)
Toujours aussi incroyable ! Le résultat est magnifique !! Good job !
Merci beaucoup!
YES!!!! been waiting 2 weeks for this cant wait to build it. This is the way.
Cool! Have fun crafting :)
Dude that is badass! Super cool
Thanks a lot :)
You should do a scout trooper helmet or clone attachments for the helmet and the chest plate because of the pauldron
Directly purchased 😅 will be a good partner for my mandalorian helmet ❤
Thanks for your support! Have fun crafting! :)
Insane le rendu final mec! Continuez comme ça c'est génial!!
Merci Paul! :)
Will you be doing the matching armour for this one??? I’m currently making your Mandalorian set, this would be great along side it!
Hello, with the table to calculate the circumference of the skull, do you leave a little space between the helmet and the head ? For example, if I'm 22'' around the head, do I take 22'' or just above to leave a little space so as not to have the helmet too close to the head ?
Thanks.
Hi, yes, I give room for the helmet to fit comfortably with padding. Take the scaling that fits your head size in the chart. :)
Ahh I have already bought the pattern can’t wait to put it together :)
Cool! Thanks for using my templates!
@@TristanMakerAlso,, just one question. Would it be bad if i would use 10mm foam instead of 8? I literally cannot find it anywhere in my country..
Great work once again. Any reason you did not shoot the helmet with automotive primer this time around?
Thanks! I wanted to use as little spray paint as possible this time.
For some reason can't get 8mm foam around here easily. Would it be better do the main helmet parts from a thicker 10mm foam, or would thinner 5mm or 6mm be fine?
Can't quite see where the corrugated plastic sheets are being glued to inside the helmet.
After you do your storm trooper armor could you attempt to do an Airborne trooper helmet?
So you've made the Mandalorian helmet, Bo-Katan's helmet, and Boba Fett's helmet, you should try making the Armorer's Mando helmet next!
Dude do a Moff Gideon helmet and armour :D. Great work!!!!!!
Could you make a Vader helmet?
Is this much different than Sabine Wren's?
Also, why do you use contact cement instead of hot glue?
The 2 things that are different are the cheek insets and the ear details. The base of the helmet is the same.
Contact cement is much faster to work with and creates a much stronger connection.
Looks awesome as always! Would you ever consider making a video about your process for creating templates from scratch?
Thanks! That's an interesting idea. Maybe someday :)
@@TristanMaker would be helpful
This is so cool!!! Would you ever consider making a template for Paz/heavy infantry?
Thanks! Maybe someday, but right now I'm starting to work on a Stormtrooper armor :)
Yaaaaay❤ thank you very much 🎉
No problem hahaha
Where do I find the templates?
how do you finish sealing the helmet once painting is done??
Just a matte clear coat like I show in the video :)
Thank you so much! Love your content
I'm glad you like my work!
Muy bueno el casco
Thanks!
niceeeeeeeeeeeeeeeee
Thanks!
Makers may have trouble using Adobe Acrobat as that costs money
I have a free version linked in the description of my printing tutorial video. This version is supposed to work without any issues :)
Acrobat Reader is free to use. You don't need anything more
Bet your next video won't be a pay villa helmet.
Great value Paz Vizsla