@@tryfixinit8438 I was looking for the best way to reinstall it after I removed it. I did figure it out. Currently I am trying to find a used valve body. Do you have any local recommendations?
nice job. there is a side filter. don't forget to change that. you have to remove the drivers side tire. the car i just got running looked like it hadn't been changed in a long time.
Hope you can help I have a 2013 Altima 2.5 drives fine but after long trips and I get on a stop then take off is really slow takes a little to speed up and currently giving me code p0776 (fluid is a little brown)
did you just spray the solenoids like that or did you put power to the solenoid and actuate the valve inside the solenoid to clean them? I'm having the same problem and I put a whole new valve body with the old rom so I don't need to program it but still has the same issue. should i just super clean out the old valve body including the solenoids with carb cleaner and put it back in?
I soaked mine for a day and blew into it. Did you clear the code? Putting the old ROM on the new valve body should solve the issue. Are there other codes on it?
As indicated in the previous videos for this code, the solenoids were clogged and this affected the performance and triggered the code. Cleaning them help resolved the issue.
Did you replace the valve complete with new solenoids, I have the same problem wonder if it works also what’s the part number, I see some many with different part numbers and they all look the same.
@@rich52movie I soaked the solenoids in carb cleaner for about 24 hours maybe less the a car drives slightly better but sometimes still have issues when the car just doesn’t want to not go/ slipping so I turn the car off and then on and it’s like it reset and now it can go. Main problem is when I brake the rpms shoot up and the transmission clucks when coming to a stop, feels like something is wrong with the down shifting. Did this solve your problem or did you replace the valve body. I’m thinking of getting a new valve body because Nissan doesn’t sell the solenoids, and the ones on Amazon and eBay have mixed reviews
Thank you for posting these. This will help me determine whether the tranny is worth saving, and if so, how to do so cost effectively. Thanks again.
Thank you very much for these videos, they really help me fix my car.have a nice day.
The one thing I can't seem to find is a video showing the connector portion of the valve body being installed. I'm struggling with that right now.
The portion of the connector can be found on top of the transmission. It is the round-like harness/connector at the top
@@tryfixinit8438 I was looking for the best way to reinstall it after I removed it. I did figure it out. Currently I am trying to find a used valve body. Do you have any local recommendations?
Thank u for the info. How do u clean the inside of the transmission before replacing the valve body
nice job. there is a side filter. don't forget to change that. you have to remove the drivers side tire. the car i just got running looked like it hadn't been changed in a long time.
That is also important. Thanks for the tip!
Hope you can help I have a 2013 Altima 2.5 drives fine but after long trips and I get on a stop then take off is really slow takes a little to speed up and currently giving me code p0776 (fluid is a little brown)
How do you add the RPM to the new value body
Hi great video, where is the rom chip located please? Is there a picture of it? Thanks
What's the meaning of ROM?
Did you find out
How I have to specific torque the valve body please ?
What was the torque specs?
P2589 indicates that the "B" circuit for the turbocharger boost control position sensor is high. Ummm wrong code !?
Yes, this one is p2859
Hello sir do you have a diagram of cvt? What website?
What do you mean the car has to be reprogrammed after putting in a new value body, and what happens if you don’t
The process is to help reset and enable the car to adapt to the new valve body. It comes with a CD containing software files for the programming.
@@tryfixinit8438 What if my remanufactured valve body didn't come with a CD?
Ratio control valve had spring on it!
did you just spray the solenoids like that or did you put power to the solenoid and actuate the valve inside the solenoid to clean them? I'm having the same problem and I put a whole new valve body with the old rom so I don't need to program it but still has the same issue. should i just super clean out the old valve body including the solenoids with carb cleaner and put it back in?
I soaked mine for a day and blew into it. Did you clear the code? Putting the old ROM on the new valve body should solve the issue. Are there other codes on it?
Thanks for the video, great hard job. How many ltr of CVT oil that you used?
You soak the solenoids in carb cleaner? For how long?
You also reused all the gaskets?
Soaked it for a day... I also reused the gasket although replacement is recommended
removed solenoids, cleaned them with carb cleaner and blew them out, this did not fix P2859 code
As indicated in the previous videos for this code, the solenoids were clogged and this affected the performance and triggered the code. Cleaning them help resolved the issue.
Did you replace the valve complete with new solenoids, I have the same problem wonder if it works also what’s the part number, I see some many with different part numbers and they all look the same.
submerge the solenoid valves in carb cleaner or equivalent cleaner 24 to 48 hrs then air pressure them clean. Good luck.
@@rich52movie I soaked the solenoids in carb cleaner for about 24 hours maybe less the a car drives slightly better but sometimes still have issues when the car just doesn’t want to not go/ slipping so I turn the car off and then on and it’s like it reset and now it can go. Main problem is when I brake the rpms shoot up and the transmission clucks when coming to a stop, feels like something is wrong with the down shifting. Did this solve your problem or did you replace the valve body. I’m thinking of getting a new valve body because Nissan doesn’t sell the solenoids, and the ones on Amazon and eBay have mixed reviews
@@HaystanHopar was not successful and opt out of a recommended new trans replacement
Does it change gears now
Previous it stuck at first gear ?
After fixing the problem, the car was sold out.
How much do you charge for this
What is the normal rpm at 120km speed?
I have no idea
@@tryfixinit8438 thanks, i found it already. Nissan made the worst decision by using this gear on there cars