If you would like to support the channel, please consider using the *'Super Thanks'* button below the video. Any donation made is greatly appreciated and will be reinvested into the channel. I would also like to express my utmost gratitude to all those who have already donated. 🍀
As was mentioned in one of these comments, not all routers can be configured to disable 5g band. I have a Spectrum 6 router and Spectrum Tech Support wants me to carry my 27cu ft smart refrigerator out in my yard outside the reach of 5g band. They told there is no admin option to disable 5g and even they do not have the ability to shut 5g off temporarily. Great design Spectrum.
Thankyou … all day been trying to work out how to change my wifi settings for my robot hoover … then took it out to the garden like the local looney and it worked in seconds . So thanks for the explanation ☺️.
During set up, try moving the robot vacuum further away from the router so you've only got one or two bars on your WiFi. 5GHz works over shorter distances, 2.4GHz works over longer distances.
I so hope this first one gets er done for my security camera…..I truly don’t want to do the last option….one and only smart device for me now..I’ll stick to the basics lol
hi. after setting up all where your smart switch connected to your 2.4ghz and your phone to the 5ghz network, can you still control your devices through your phone?
You don't need to bring the device with you when you set it up. You can just set it to pair before you go outside with your phone and just get your phone into 2.4 wifi and setup the device the same way. Saves you from bringing the device with you.
I’ve tried that method too and it doesn’t work! I legit had to take both to the end of my driveway! I think u just got lucky! Thanks for this video! U saved me a big headache!
Yes I gave it a "lovely juicy like" lol ... "Rooter" man. PS. I had to disable my 5G wifi from my AT&T admin router website in the settings - only to turn it back on after I got my Meross smart light set up after so many frustrating tries - discovering that the 2.4G and 5G simultaneously enabled frequency was hindering it.
They have to have them run on 2.4G Hz as it has a longer range. If they had them on 5 GHz, you would only be able to use the device close to the router.
Does the cable need to be plugged in to your house to try reset it so it flashes ? Or the cable can be connected to another house to be a bit further so it’s possible to be closer to the 2.4ghz
thank you so much 👍. I bought it maybe 2 years ago and gave up because I couldn't connect 😁. Silly me 😊! After watching your video I tried again... It is working. And plug as well 👍😊😊😊😊😊. Thank you so much!!!
Omg....thank you so much...security camera up and running... had to go to far corner of my back yard. I almost sent darn thing back... I've learned so much. Your a life savior. ..I can watch my wildlife now
Hold on, maybe I’m wrong. Or maybe my internet router works different then what ever he’s talking about in this video. But when I connect to my Wi-Fi I have the option to choose wether I want to connect to 2.4 or 5ghz band. Don’t get me wrong, a tutorial video is always welcome and appreciated, but this video leaves me asking if there are dou-band routers that don’t let you choose want band you want to connect to. If so then what is even the point of dou-band.
When you connect to WiFi with a smart phone, PC, table etc, you will get the option to connect to either the 2.4 or 5GHz. However, you will not get this option in the smart devices app which is why you have to disable it.
@@UTILITARIANTVUK my router is stuck on 5 gigahertz built in I guess maybe duel band , my phone won't allow me to select which band it's stuck on 5 gigahertz and grayed out so I can't switch . I even tried restarting the router which does nothing
How is the ‘going outside with an extension lead and a lamp’ not the silly option...?!!! And yes it’s rooter, the same way the word YOU is pronounced. ROUter 🎉🎉
If you would like to support the channel, please consider using the *'Super Thanks'* button below the video. Any donation made is greatly appreciated and will be reinvested into the channel. I would also like to express my utmost gratitude to all those who have already donated. 🍀
As was mentioned in one of these comments, not all routers can be configured to disable 5g band. I have a Spectrum 6 router and Spectrum Tech Support wants me to carry my 27cu ft smart refrigerator out in my yard outside the reach of 5g band. They told there is no admin option to disable 5g and even they do not have the ability to shut 5g off temporarily. Great design Spectrum.
Not ideal but you could get some extension cables and move the router away from the fridge.
I was wondering where that 2.4/5 G option was, but I see there is none...thanks Spectrum!
All u need is a wave router it 2.4&5g MHz
@@UTILITARIANTVUK All u need is a wave router SPECTRUM
Thankyou … all day been trying to work out how to change my wifi settings for my robot hoover … then took it out to the garden like the local looney and it worked in seconds . So thanks for the explanation ☺️.
Maybe the neighbours thought you were vacuuming the garden? 😄
after 4 hours of me trying to get my bloody lightbulb to work, I found this video!! Thanks love!
Glad it helped.
what about a washer and dryer? am I supposed to drag it outside?
This seems out of date as my home app does not look like this. I've checked for updates and I'm up to date.
PLEASE HELP! I just got a yeedi robot vacuum and it says to connect to 2.4Ghz but it says my wifi is 5Ghz. What do I do?? 😭
During set up, try moving the robot vacuum further away from the router so you've only got one or two bars on your WiFi. 5GHz works over shorter distances, 2.4GHz works over longer distances.
You guys invented the language 😂😂 High five. Such a true statement, made me lol.
I so hope this first one gets er done for my security camera…..I truly don’t want to do the last option….one and only smart device for me now..I’ll stick to the basics lol
You''re super helpful, I love your Brit's sense of humor -:)
Thanks!
The first recommendation worked!! So freaking easy
A great tutorial, speaks my language: “rooter” 🇬🇧👍😉
😂
hi. after setting up all where your smart switch connected to your 2.4ghz and your phone to the 5ghz network, can you still control your devices through your phone?
I have two vivitar light bulbs that reach 100% when it’s trying to connect but then it times out how did I fix
thanks gonna try this on my camera.
Hi - I followed your advice and it worked a treat! Thanks !
why is stuff on a 5khz band? rather than a 2.khz?
O6/04/23 method one for the rescue 😊
You don't need to bring the device with you when you set it up. You can just set it to pair before you go outside with your phone and just get your phone into 2.4 wifi and setup the device the same way. Saves you from bringing the device with you.
I've tried this method and it did not work for me?
I’ve tried that method too and it doesn’t work! I legit had to take both to the end of my driveway! I think u just got lucky! Thanks for this video! U saved me a big headache!
so if I took my phone and the cctv ( 5khz) outside I can pair my cctv up with my smartphone?
Yes, take the CCTV and your phone away from the router until you get around 2 or 3 bars on your signal.
Yes I gave it a "lovely juicy like" lol ... "Rooter" man. PS. I had to disable my 5G wifi from my AT&T admin router website in the settings - only to turn it back on after I got my Meross smart light set up after so many frustrating tries - discovering that the 2.4G and 5G simultaneously enabled frequency was hindering it.
ive got a cctv on 2.4ghz, internet etc on kHz, are there any cctv that run on 5 kHz?
They have to have them run on 2.4G Hz as it has a longer range. If they had them on 5 GHz, you would only be able to use the device close to the router.
Does the cable need to be plugged in to your house to try reset it so it flashes ? Or the cable can be connected to another house to be a bit further so it’s possible to be closer to the 2.4ghz
As long as you're still in range of the 2.4Ghz of your router, it doesn't really matter where you get your power supply.
Nice intro!
👍
thank you so much 👍. I bought it maybe 2 years ago and gave up because I couldn't connect 😁. Silly me 😊! After watching your video I tried again... It is working. And plug as well 👍😊😊😊😊😊. Thank you so much!!!
Glad it helped.
Or you could just put a thick box over the router to lessen the single instead of going outside scaring your neighbors.
About to do that at 1 am
I have the same WiFi as you and my smart bulb won’t pair for some reason . Make a video on that
See if this helps th-cam.com/video/af3ibYJAPwY/w-d-xo.html
What about leds? Mine are already sticked to the wall and I don’t want to damage the paint, got any ideas?
Get ready to paint
Connect them while the sticky part is still covered
Awesome video although the 1st method didn’t help.. so will be watching the 2nd video, hope will work🙏🏼☀️
Fun to watch😁
Great help, thanks very much
Still not working I know my light is a TCP but it won’t connect but I don’t know if it’s the right version I have a one with a remote controll
Could you send me a link to the make of light you have?
Thank u so much
🤣🤣🤣 you funny RUTHER guy
thanks!
If you liked the video, please tap the subscribe button!👆
Omg....thank you so much...security camera up and running... had to go to far corner of my back yard. I almost sent darn thing back... I've learned so much. Your a life savior. ..I can watch my wildlife now
im ready to bin my bulb ,i turn it on of 4 times as per instructions and it just flashes 3 times then stays on ,so cant get it into pairing mode
Every bulb I've had is 3 times only. Odd that it states 4?
Well i did try all that.. cant still get it to work
Soz 😞
I turned on the 2.4 on my wifi hub on the internet and my smart device still won’t work... is there any help for this?
Did you turn off the 5ghz? th-cam.com/video/JCvWeegGgT8/w-d-xo.html
Hold on, maybe I’m wrong. Or maybe my internet router works different then what ever he’s talking about in this video. But when I connect to my Wi-Fi I have the option to choose wether I want to connect to 2.4 or 5ghz band. Don’t get me wrong, a tutorial video is always welcome and appreciated, but this video leaves me asking if there are dou-band routers that don’t let you choose want band you want to connect to. If so then what is even the point of dou-band.
When you connect to WiFi with a smart phone, PC, table etc, you will get the option to connect to either the 2.4 or 5GHz. However, you will not get this option in the smart devices app which is why you have to disable it.
@@UTILITARIANTVUK my router is stuck on 5 gigahertz built in I guess maybe duel band , my phone won't allow me to select which band it's stuck on 5 gigahertz and grayed out so I can't switch . I even tried restarting the router which does nothing
best option- call provide and have techincal support lower it or split wifi
I did that and its not working too
Soz Linda.
How do I change 2.4 GH
This shows you how to access 2.4 and 5 GHz. th-cam.com/video/JCvWeegGgT8/w-d-xo.html
How can you tell if you are far enough thanks
The WiFi signal icon on your phone should be showing 1 bar.
Oh ok thank lol I try but i didn’t go far enough because it didn’t dropped in 2 bar thanks again I’ll try tomorrow
@@misaplantaqua5722 👍
How is the ‘going outside with an extension lead and a lamp’ not the silly option...?!!! And yes it’s rooter, the same way the word YOU is pronounced. ROUter 🎉🎉
All I can say to that is Boop-Oop-a-Doop!
@@UTILITARIANTVUK 😂😂😂👏🏼🤪
Ok let’s see if you got my solution lol
this didnt work for me either sadly
did you try disabling the 5ghz? th-cam.com/video/JCvWeegGgT8/w-d-xo.html
@@UTILITARIANTVUK yeah my 5hz is disabled, the light bulb isnt being detected while im scanning for some reason
@@devinsdior7445 might be worth checking that the 2.4ghz didn't turn off as well as this happens sometimes?
@@UTILITARIANTVUK my 2.4g is on and all my other devices are connecting to it fine, weird
Possibly faulty?
So fucking STUPID that to get smart lights to work I have to plug it into an extension port and go stand out in the god damn cold.. FUCK!
I took a couple of wifi cameras to nicaragua, and it doesn't work cause there is 2.4ghz ... What should i do?