I wrapped my car today. This guy is fucking awesome! It becomes much more easy to wrap my car roof. It takes me approximately 3 hrs to do this. Thank you so much!
Yes flat roofs look pretty easy to do but what about SUV roofs. Particularly a Suburban or Tahoe. The roof rack is simple enough to remove but the roof itself has indented riser runs that run the length of the roof. If at all possible could you make a video explaining how to lay down the film without having major bubbles that form. I've done lil civics and nissan roofs but my next endeavor with this truck is kinda scary.
For antenna mounts I measure where they will be on the print and then wrap the base of the mount tightly with medium gauge soldering wire and kiss cut the shape out with an 1/8" bleed. Then with a helper just one shot it on. It's quicker than this.
Hi there, Thank you for contacting us. To see if Avery Dennison is the next step in your career journey, please visit our job board at averydennison.com/careers. Thanks again and good luck in your search!
Hi there, Thanks for reaching out! Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
Even felt squeegees will leave some minor scratches in the lam. But they will eventually dissappear once the wrap is out in the sun. If you can't wait for that - just lightly go over the vinyl with a heat gun or torch to heal the scratches in the laminate.
Can you just come wrap my roof for me? I have a 2017 Dodge Charger. I tried wrapping the roof today with no luck. I bought a Vvivid xpo wrap from Amazon. I'm not sure it was the best wrap for a first timer, or if it was even a Vvivid wrap or a copy. I just kept ending up with air bubbles. I'm sure you can't wrap my roof, but can you give me a good matte vinyl wrap, and where I can get it? Thanks
Stick with 3M/Avery/Arlon. They have air release features. Get them at MetroRestyling. Of course you still have to have tools and follow the video instructions.
Yeah this dudes always got contaminates and glue lines in his shit. Its funny hes teaching folks how to do the easiest stuff when he should be teaching them how to avoid all the shit I just mentioned. My customer would be asking for a refund.
This is the best roof wrapping vdo I have ever seen thank you
exactly what i needed to watch, i been trying to find a vinyl vid that i didnt have to take out my shark fin.
Helpful video. Clear and informative
I wrapped my car today. This guy is fucking awesome! It becomes much more easy to wrap my car roof. It takes me approximately 3 hrs to do this. Thank you so much!
Thank you for this. I really didnt want to remove my headliner to get to the bolt
Justin is always awesome!
Amazing. Thank you! Working on my Pony-car now. This really helps.
Glad we could help!
The best Justin!
Yes flat roofs look pretty easy to do but what about SUV roofs. Particularly a Suburban or Tahoe. The roof rack is simple enough to remove but the roof itself has indented riser runs that run the length of the roof. If at all possible could you make a video explaining how to lay down the film without having major bubbles that form. I've done lil civics and nissan roofs but my next endeavor with this truck is kinda scary.
I love your worked
Great vid. Just quick one. After I mirror the vinyl and I start to squeegee I find a lot of air stuck under it or bubbles coming up?
Thanks
For antenna mounts I measure where they will be on the print and then wrap the base of the mount tightly with medium gauge soldering wire and kiss cut the shape out with an 1/8" bleed. Then with a helper just one shot it on. It's quicker than this.
Thanks for the feedback, we appreciate it!
what about the video for the antenna?
what is meant by the term "get 100% GLASS"? as in, no crinkles, presumably?
completely flat and straight like a pane of glass
I have a tacoma with a roof rack. would I have to remove the entire roof rack or can I just remove the bars and work around it?
Thnks for inform
Can I apply for a job at one of your branches? I have experience in this work . thank you
Hi there,
Thank you for contacting us. To see if Avery Dennison is the next step in your career journey, please visit our job board at averydennison.com/careers. Thanks again and good luck in your search!
Can you tell me please, how much cost to wrap just the roof of my Type r?
Hi there,
Thanks for reaching out! Please direct your question regarding Avery Dennison products to our Graphics Solutions team. They can be reached at +1 (800) 282-8379, or visit avydn.co/2tKv8eK.
Hey Justin, what are you using on your squeegee to make sure it wont leave marks on the wrap? thanks!
It's a felt covered squeegee
Even felt squeegees will leave some minor scratches in the lam. But they will eventually dissappear once the wrap is out in the sun. If you can't wait for that - just lightly go over the vinyl with a heat gun or torch to heal the scratches in the laminate.
Can you just come wrap my roof for me? I have a 2017 Dodge Charger. I tried wrapping the roof today with no luck. I bought a Vvivid xpo wrap from Amazon. I'm not sure it was the best wrap for a first timer, or if it was even a Vvivid wrap or a copy. I just kept ending up with air bubbles. I'm sure you can't wrap my roof, but can you give me a good matte vinyl wrap, and where I can get it? Thanks
Stick with 3M/Avery/Arlon. They have air release features. Get them at MetroRestyling. Of course you still have to have tools and follow the video instructions.
One million dust.
Yeah this dudes always got contaminates and glue lines in his shit. Its funny hes teaching folks how to do the easiest stuff when he should be teaching them how to avoid all the shit I just mentioned. My customer would be asking for a refund.