Years after you posted it, this was a tremendous help to me! Thank you so much. I only put on rails for now, and I'm really happy with them. One thing I discovered out of desperation -- because I messed up a couple of the caps over the openings for the screws -- is that a teeny tiny crochet hook works perfectly to pinch out those caps if you need to take them out. I used a size 5 crochet hook.
Loved this video. One note: on my roof rail and crossbar kit made by Tuntrol, the ‘feet’ have two holes each in them -and the crossbars have two hole tapped at each end… and wouldn’t you know… there were 8 additional screws sent with the kit. Now nowhere in the instructions are these holes and screws discussed. But after installation of the racks, my daughter has reported that the crossbars rattle and make a lot of noise. So putting 2 and 2 together… so today I’m going to remove the cross bar assemblies, install the screws to secure the feet to the bars and then put the whole kit back together… IDK if the kit you installed had this feature, but it’s worth noting that the system should be tied together prior to attachment to the roof
Ive been listening this vidéo like 6 or 7 times...clear explanations, done installing the same on my 2017 cx5...here up north in Québec ! thank you honey, you are the love of my life ❤🤙
Great video. One final thing I'm struggling with: the rails got installed without issue, but there's little grey 'caps' on the inside of these rails for the screw holes: ie, where the cross bar rails should go. The instructions that came with the kit do not touch on this. Guess just remove them by force? Because as is there's no way the black screws for the cross bars will go into these tiny grey holes. Idk what the proper term is, sorry.
Nvm, had to peel the grey caps off, all good! Successful install but the cross bars (even though in place), seem a bit loose: why didn't the instructions mention using the tinier screws to mount the crossbar into the stanchion itself?
Please note that the 2 roof racks are NOT the same size. One is a couple inches longer than the other one. The longer one goes up front; the shorter one goes in the back.
My drivers side is leaking water somehow and its sitting right by the rear corner of the rear window and rusting it out, I think the water is getting in at the last bolt hole and running down?
I am glad you mentioned that the rear roof rack can be somewhat tight. No matter what I did, I could not fit the rear rack with the rubber insert which seals it. I am wondering if I can pop one of the silver squares on the rail and slightly move it outward? Has anyone tried to pop one of these out easily? My rails were installed by the dealer and I am trying to install the cross bars myself.
Great video! Just bought 2021 cx5 thinking of getting rails and bars soon. Question, how much space (view) does the crossbars take away from sunroof view?
Which is better a roof crossbars that is attached to a door frames or the one you showed for us? Coz I'm planning to put crossbars to my 2019 Cx 9 please help me im a little bit confuse what to install thank you.
This video is awesome and was very helpful. However wanted to give a warning: I did not have the right tools. Had to purchase them for about $75, then aligning the rails to the correct holes was very difficult and frustrating. I kept having to unscrew and screw back in. Overall the experience took me weeks of waiting for the OEM components, days of ordering the correct different toolsets from Amazon, and hours of trying to get the rails installed and then the crossbars. I had to do this outside during the summer with mosquitoes and humid weather. If I could do it over again, I would have just had the dealership install them for me. 😂
Just one quick question for those that have these installed. How is the wind noise at freeway speeds? I believe mine get pretty loud compared to the ones I had on my Highlander.
So I ordered a very similar model of slides and roof-rack all-aluminum "Heka" from Amazon for $328. Quality of the product for the price is great and I highly recommend it, although it did not come with instructions and a few foam pads was missing (!) This UT video was very helpful and save me a lot of time to figure out. Thanks!
Hey everythingdiy... I actually have the machine grey version. I had the roof rails wrapped in gloss black. They look beautiful and would stand out on your white CX-5. Also I didn't care much for Mazdas roof rack so I might get the Thule aeroblades for a better aesthetic look. Great diy video and if you hate the wheels that much... You can always get them powder coated. 👍🏼
Excellent. Too bad the Kit did not come with instructions for roof rack, ( only for the cross rails), They should have steered you to the video for instructions. Had to hunt for it at TH-cam the 7 minute video was excellently.
Hi - Thank you so much for sharing the video, we recently purchased some kayaks and really need a good way to transport. I have a 2017 Mazda CX-5. Is there a specific website I should order the OEM roof rails?
Has anyone have the Load capacity and speed limit of the cross bars ?.... I called the dealer asking for that informand surprisingly they were clueless
Great job and video! Thanks for sharing you expertise with this. I would very much like to put a good functional rack on my Subaru Crosstrek. Any input is appreciated!!
Thank you for sharing! I want to add rails and cross bars to my 2017 CX-5, so it's nice to see how easy installation is! Did you buy the rails and cross bars directly from Mazda, or did you find them somewhere else?
Please can you tell me where i can get Aliexpress store the product.Thanks for the video is very easy to compreder despite the language,i am spanish.Happy Day.
Years after you posted it, this was a tremendous help to me! Thank you so much. I only put on rails for now, and I'm really happy with them. One thing I discovered out of desperation -- because I messed up a couple of the caps over the openings for the screws -- is that a teeny tiny crochet hook works perfectly to pinch out those caps if you need to take them out. I used a size 5 crochet hook.
Just bought a new 2021 CX-5!! I don't even have it yet, but we will likely put on a roof rack. Your video is so so helpful!! Thank you!
Loved this video. One note: on my roof rail and crossbar kit made by Tuntrol, the ‘feet’ have two holes each in them -and the crossbars have two hole tapped at each end… and wouldn’t you know… there were 8 additional screws sent with the kit. Now nowhere in the instructions are these holes and screws discussed. But after installation of the racks, my daughter has reported that the crossbars rattle and make a lot of noise. So putting 2 and 2 together… so today I’m going to remove the cross bar assemblies, install the screws to secure the feet to the bars and then put the whole kit back together… IDK if the kit you installed had this feature, but it’s worth noting that the system should be tied together prior to attachment to the roof
Can you share exactly which cross rails you bought and where they were purchased? Thank you so much for the video it’s very helpful.
Ive been listening this vidéo like 6 or 7 times...clear explanations, done installing the same on my 2017 cx5...here up north in Québec ! thank you honey, you are the love of my life ❤🤙
Wind noise its a perceptible?
For future reference, when removing the rain gutters do not attempt to pull up on them. Instead, pry it from the side. It will pop off easy.
And the plastic trim tools and a rag help protect the paint. Thanks for the tip!
Great video. One final thing I'm struggling with: the rails got installed without issue, but there's little grey 'caps' on the inside of these rails for the screw holes: ie, where the cross bar rails should go. The instructions that came with the kit do not touch on this. Guess just remove them by force? Because as is there's no way the black screws for the cross bars will go into these tiny grey holes. Idk what the proper term is, sorry.
Nvm, had to peel the grey caps off, all good! Successful install but the cross bars (even though in place), seem a bit loose: why didn't the instructions mention using the tinier screws to mount the crossbar into the stanchion itself?
You made it seem so easy. Actually installed on my 2018 CX5 and had a much harder time. Thankfully, this video helped me so much. Awesome!
I have a 2018 CX-5 and had no idea how to do this. Now I get it thanks to your explanation and attention to detail. Thanks!
Please note that the 2 roof racks are NOT the same size. One is a couple inches longer than the other one. The longer one goes up front; the shorter one goes in the back.
The roof racks or the cross bars?
Great video!! In regards to the roof bars what length are they from each contact point to the roof rails?
My drivers side is leaking water somehow and its sitting right by the rear corner of the rear window and rusting it out, I think the water is getting in at the last bolt hole and running down?
I am glad you mentioned that the rear roof rack can be somewhat tight. No matter what I did, I could not fit the rear rack with the rubber insert which seals it. I am wondering if I can pop one of the silver squares on the rail and slightly move it outward? Has anyone tried to pop one of these out easily? My rails were installed by the dealer and I am trying to install the cross bars myself.
Great video! Just bought 2021 cx5 thinking of getting rails and bars soon. Question, how much space (view) does the crossbars take away from sunroof view?
14 newton meters = 10 ft lbs Incase anybody was wondering
es necesario utilizar los roof rail o se pueden colocar directamente las barras transversales
which crossbars are those? The Mazda ones are silver - I want the black ones. Thanks.
Are the pre-2017 CX5 roof racks not compatible with the 2017+ models? Do bolts have different offset?
Can you send me the link for the roof rack and cross bars your ordered? I also have a 2018 CX-5 and like the look of the ones you installed.
Which is better a roof crossbars that is attached to a door frames or the one you showed for us? Coz I'm planning to put crossbars to my 2019 Cx 9 please help me im a little bit confuse what to install thank you.
This video is awesome and was very helpful.
However wanted to give a warning:
I did not have the right tools. Had to purchase them for about $75, then aligning the rails to the correct holes was very difficult and frustrating. I kept having to unscrew and screw back in.
Overall the experience took me weeks of waiting for the OEM components, days of ordering the correct different toolsets from Amazon, and hours of trying to get the rails installed and then the crossbars. I had to do this outside during the summer with mosquitoes and humid weather.
If I could do it over again, I would have just had the dealership install them for me. 😂
I do not have railings. Can I buy just roof racks with specific pads to mount on the roof? Or only with the use of railings?
Really helpful. I got mine installed in 2019 CX-5 successfully... Thanks
How long/wide are the crossbars from where it enters the mounting piece to the other end? Is it the same length for both front and rear? Thanks!
Thank you so much. This is going to be helpful when I put one on my CX 9. I’m used to the clamp on Yakima racks which I’ve used in the past.
Where are you? Why you stoped creating videos?
Does the video freeze constantly or is it me
Very useful video! Perfect SUV, and a very cool girl. Mazda is the best automaker, by the way.
Have you tried fitting 2 kayaks on this, if so did it work well?
Can anyone confirm this part # fits 2023 models, Mazda parts specify only 2017-2021?
Do you know how long the cross bars are minus the "towers"? How much usable length in other words.
En dónde compraste las barras laterales??
Where did you order/buy the roof rails from? it's difficult to figure out what online retailers are legit :(
Just one quick question for those that have these installed. How is the wind noise at freeway speeds? I believe mine get pretty loud compared to the ones I had on my Highlander.
Great Video...do you mind sending me the link to the ones you bought...would like to get some myself.
So I ordered a very similar model of slides and roof-rack all-aluminum "Heka" from Amazon for $328. Quality of the product for the price is great and I highly recommend it, although it did not come with instructions and a few foam pads was missing (!) This UT video was very helpful and save me a lot of time to figure out. Thanks!
I’m in the same boat. Did you instal without the pads or did you just request that HEKA send more
Where did you buy your OEM roof rack/cross bar?
Where can i buy this kits? Thanks for the video anyway..
Hey everythingdiy... I actually have the machine grey version. I had the roof rails wrapped in gloss black. They look beautiful and would stand out on your white CX-5. Also I didn't care much for Mazdas roof rack so I might get the Thule aeroblades for a better aesthetic look. Great diy video and if you hate the wheels that much... You can always get them powder coated. 👍🏼
Does anyone know if the 2021 rails are nearly flush like the older models?
So what was the rack system you installed here? Did I miss something?
Nevermind I see OEM
Why aren’t we no longer seeing videos from this channel???
I go install front lip on my mazdaspeed3 now ( i chceck your video its easy) BTW on this video u dont have the lip on speed 3 why ? U brake it or ?
What happened you don't make no more vidz?
Dónde está el Mazdaspeed 3?
How much is 14nm in freedom units?
The roof rack is nice! I wanted them on our cx5 but my wife didnt care for it
Has anyone had problems with this rack system and the sun roof? Does it open alright?
Excellent. Too bad the Kit did not come with instructions for roof rack, ( only for the cross rails), They should have steered you to the video for instructions. Had to hunt for it at TH-cam the 7 minute video was excellently.
Hi - Thank you so much for sharing the video, we recently purchased some kayaks and really need a good way to transport. I have a 2017 Mazda CX-5. Is there a specific website I should order the OEM roof rails?
Got mine off Amazon for $285. Easy install and this video helped. 2018 cx5
@@DP2theizzle Hi Kevin, did you buy OEM or another brand? If off brand which kind or URL to amazon. Thanks so much!
Oh nice. none of that sawing bs on the 2017+
Could you do a video on installing the thinkware dashcam on the 2017s?
Sorry we already installed it. It's honestly the same process, maybe a slight difference here and there but it would pretty much be a duplicate video.
Can i get spare caps if i damage one?
Thank you! Used your videos for breaks and searching for the rack I found another one!
Where did you buy the rails from? Part Number? link?
Where did you buy the bars Please.
Has anyone have the Load capacity and speed limit of the cross bars ?.... I called the dealer asking for that informand surprisingly they were clueless
Where did you purchase those parts?
Sucks the cross rails go over the sunroof
Do i need side rail or is there roof rack i can buy to be fit in? Thanks
I don't think you can retrofit any rack without the roof rails.
Anyone own a cx5 and notice wind (whistle) noise coming from the roof rails when cruising around 50 mph?
If you install a wind fairing that should eliminate most noise.
Yass! Im glad your back in the vid-game again.
Where did you buy the parts from? thanks
I like your channel...i’m from Italy
When will be the next video
Yea!!! you're married now. Congratulations, if not years ago! Love the video help! Keep being AWESOME!
I get having a rack if it's being used but I just don't get the hype about them on Honda's or whatever.
I do want to see how you do it😏
Thank you for your explanation.
Greetings from Germany.
I don’t know why but on my side this video just freezes the whole time. I’ve tried it on different devices, in different provinces, on different wifi.
Great Bike Rack !
This was very helpful. I'll save some $$ doing it myself. Thanks!
Где купила? Ссыль можно?
very clear helpful video - thank you
Great job and video! Thanks for sharing you expertise with this. I would very much like to put a good functional rack on my Subaru Crosstrek. Any input is appreciated!!
Thank you for sharing! I want to add rails and cross bars to my 2017 CX-5, so it's nice to see how easy installation is! Did you buy the rails and cross bars directly from Mazda, or did you find them somewhere else?
There is a few Online OEM part stores just for Mazda
Awesome video - love these How-To presentations - so helpful. Thanks for sharing!
Thank you for the detailed explanation.
Will definitely put such on mine, thanks
Great/helpful video..!!
Gotta say it... NICE RACK! And good vid ;-)
Earnest Bunbury lol
You had to feel a little uneasy when ripping off those black trim pieces from your brand new car.
Please can you tell me where i can get Aliexpress store the product.Thanks for the video is very easy to compreder despite the language,i am spanish.Happy Day.
Thank you so much
Thank you soooooo much🙏
I hate petrol even if they are cheap but the diesel in the CX 5 way expensive.
thanks for the help!!
Oh my.....don't pry on the glass.....
Get 'em girl!
Come back ):
Thank you
good work
Gracias
I wanna see u surfing!
She totally looks like Debbie Gibson
She torqued the roof rack bolts i cant... lmfoa
يالله عليك يا دكتوره ههههه
May I please date you. I need you in my life 😫😫
Nice Rack !