99-04 Jeep Grand Cherokee: how to clean the throttle body and IDLE air control valve
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Enjoyed the video or found it helpful? feel generous? you can donate on the main channel page. Thanks for watching!
This is a very short video on how to clean your throttle body and IDLE control valve on your jeep grand cherokee.
this is the first thing that you should try to do if your jeep dies while idling at an intersection or if it shakes or has a rough idle.
items used in the video
cleaner spray: goo.gl/Htf253
Ratchet set: goo.gl/Iu0zNq
full screw driver set: goo.gl/Ye0zLZ
-----------------------------------------------------------------------------------------------
Support this channel!
COINBASE
Purchase Bitcoin / Ethereum / Litecoin with your debit / credit card!
Purchase $100 of any crypto and get an extra $10 worth of bitcoin by using the code below
www.coinbase.c...
Ledger - Hardware cryptocurrency wallet
Keep multiple cryptocurrencies safe on a NANO leger hardware wallet!
www.ledgerwall...
AMAZON
Support this channel by purchasing items on Amazon.com!
amzn.to/2gHo1Zh
Genesis Cloud Mining
Use my code at checkout to save 3%: 8gIbXD
www.genesis-mi...
PRIVATE INTERNET ACCESS
Use a secure VPN to encrypt your internet connection
Easy setup and no logs!
www.privateint...
Google - Project Fi Phone Service
Pay only for the data you use and get the best coverage in the world!
Get $20 off your first bill by using the link below
g.co/fi/r/45A00V
-----------------------------------------------------------------------------------------------------------
CAN I INTEREST YOU IN A FLASHLIGHT
My 2001 Jeep Cherolee was idling way too high, this video is EXACTLY what I needed to fix it. Thanks!
Remember that to always remove the negative side of the battery before you do any sensor replacement. Safety first. if you have a check engine light and determine you have a bad sensor or if you simply are cleaning sensors and carb, etc. in order to reset the code when the problem sensor is replaced, you need to be sure the negative side of the battery is removed for 4-5 seconds to get a reset of the electronics and hopefully eliminate your idiot light from coming back on. If you don't the sensor you replaced may be good but still show an idiot light until you reset the electronics by removing and replacing the ground from your battery.
Just cleaned my IAC, there was none more black than mine! I also replaced the TPS, solved my problems of irregular idling and some shifting problems. $30 for the TPS, $4 for a can of throttle cleaner. Thanks for the video!!
Thank you for posting this. I just went out and fixed my 2002 Jeep Grand Cherokee from stalling out using the info from your video. Cheers!
This guy is cutting corners it doesn't seem like he knows what he's really doing he sucks thumbs down get off the air dude
Thanks for this video. I just cleaned that sensor and the TB of my daughters 02 Grand Cherokee and it fixed the stalling problem she'd been having.
Thank you so much! my 2004 jeep was idling very high, I followed your instructions and now it runs at regular idle rpm's, I reset the code and they stayed cleared. I ordered a new control valve, but I may not need it. very helpful.
For my 2000 GJC this procedure improved the idle. The air valve and its mating surface on the port were dirty. (as shown on your video) Replacing the two rubber vacuum hose that attach to the back/driver-side of the throttle body fixed it. Important to note: the engine reported NO error codes to the ECM. It just had the rough idle and the random stalling at stops. This led me to think, in my case, it was NOT a sensor or control transducer. Thanks for the effort!
Your video really help I followed the steps and fixed my P0505 problem on my Grand Cherokee 2000 4.7! Thanks a lot!
Nice video, was able to follow along and clean mine.
another major problem with the jeep grand cherokee overlands with the 4.7L H.O. engine which is really over looked is the MAP sensor, even when you change the TPS sensor and the IAC sensor you can still have a idle problem .... engine idles to 1500 rpm and then drops to 450 rpms, but the correct idle 550 rpm...The MAP sensor also works with other sensors on the Jeep engine, specifically the Throttle Position Sensor (on the throttle body) and Crank Position Sensor (on the transmission bell housing) to control other fuel flow and ignition timing functions
A touch of oil on that throttle position sensor fitting would probably be a good idea. There should not be rushed on that. That indicates that the seal or gasket has been seeping air a little bit
I totally appreciate this video I just purchased one 2001 Grand Jeep Cherokee I just replace the cylinder head and now it's shaking at idle driving me up a wall I'm going to take the throttle body off and try to clean it actually, I'm going to clean the O2 sensors as well as the map sensor I got a very good deal on this Jeep. Thank you for the information.
Thanks, Link and remember that God loves ❤️ you!
I just tried this and it cleaned my throttle body with brake Kleen and wiped down everything before I put back together
Would this also help, if the vehicle hesitates when you step on the gas to go up a hill? Mine has been doing that for the last couple days.
A bit dark but I get it Cool thanks . Love my Laredo GC
I feel like I'm on a rollercoaster ride watching this video. Hehehehehe...
You can lift up that 'idle flap' and spray inside the cavity it will help free up some of the build up.
+Ricardo Santiago recorded with an HTC one. Sorry for the crappy quality. Hopefully some of the newer videos are better. This was also recorded in the evening so the lighting sucks.. but I needed to get to work the next morning.
great directions, need more lite
Since you changed your crankshaft sensor might as well change the camshaft sensor,Sometimes its either 1 or the other, better to change both. Still, the smoke i think it means that your burning oil. Got any error codes?( 3 times switch on and off without starting engine, it should give you a code or done if you dont)
Thank you for the video :)
What could be the problem if I got to keep pressing the gas for the truck to stay on.cause if I don’t hit the gas it turns off
The idle air control valve or throttle position sensor
@@link375 I have the same problem wit my jeep it randomly shuts off while driving and I will press the gas pedal to get it going again after a couple try I'm going to try cleaning the throttle body and change the iac and pcv as well as do a tune up hopefully this will fix the problem
My 02 Jeep Grand Cherokee was doing that it’s a bad crankshaft sensor only 11$ doesn’t turn off anymore while driving
Una pregunta, se puede subir la aceleración en el tornillito de la mariposa
Great vid, Can anyone tell me where the MAP SENSOR is an maybe a link with a picture please
Will this help engine dying when the AC is on, I recently recharged the Freon and now it stalls out after it being on
My 99 grand Cherokee failed emission, but it was not the CO 2 censor, it was my NOx that failed. Do you know anything about this particular problem?
was your jeep stalling? mine1 stalls and idles rough at stop lights
Did you ever fix that issue dillion
I've got that same problem right now too..what did you do????
So mine mostly did it during cold weather, i did end up fixing it. But i don't know which sensor it was that did it. I replaced a couple it was years ago
So there is hope you will fix it, keep trying.
thanks
You need a light.
Puede hacer este video en español, soy de Venezuela
my map sensor keeps going out can what causes that
turn on a damn light!
I have the same motor, on my 01 JC, idles and sometimes it even shuts down. I have to press the gas pedal in order for it to start or keep running, it thorws black smoke. Changed the crankshaft sensor, still the same problem, would that valve being dirty cause the jeep to shut? Thanks!
watch my other video on how to replace the coils, spark plugs and tps
I thought my battery had died when i left work yesterday. Someone jumped me off and i got home without incident. This morning, it would jump off but only while you held the gas. as soon as you let off the gas it would cut off. could this have something to do with the throttle body?
I'm having the same problem did you find out what it was
Torx T-20
What was the point of unhooking the TPS?
To clean it properly.
You didn't clean the tps...
Did mine today was running rough and hard to start in-the cold
was it the idle sensor `///
having same issue
@@mikajones3018 we cleaned the crud off the sensor and cleaned the carb seem to do the trick 3/ months later and still running good
By the way, I noticed that there was no follow up. Did this solve the idle problem? For the last 2 days, I've been having a similar issue where when I would come to an intersection, the rpms would drop and the engine would die. This doesn't always happen though so I was wondering if this simple fix would solve the same problem. Also, for a while the check engine light has been on and I'm wondering if the two aren't connected. I don't have one of the engine code checking devices so I'm trial and erroring it right now. More importantly, I was curious if this cleaning solved the problem.
Thanks!
no it didn't, I had to replace all the spark plugs, TPS and ignition coils there's a video on my channel on how to do that
@@link375 what kind of plugs did u use and how long did it take u do that job?
shouldnt you run the truck while spraying
No. Then you'll get unfiltered air in your engine.
My jeep doesn't want to go like it's not getting a enough gas,what could it be
fuel filter, ignition coil, spark plugs
IS THAT A 4.0L OR 4.7L ENGINE?
it's a 4.7L engine
How did anyone find this usefull
To dark the video
Damn...Too dark for me.
valve.. wtf? it's a sensor
Technically, it's an idle air control valve.
cant see shit
Lagging so much, I fell asleep. Thank you for the boring narration
Sweet dreams