Ryobi 37cc Gas Chainsaw Review...It's OK by
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Home Depot and their Ryobi chainsaw...it's a pretty good inexpensive saw, but far from great. If you understand what it's capable of and designed for, it's a good buy.
Ryobi Chainsaw: go.magik.ly/ml/...
www.gettinjunkd...
Please comment, like, subscribe and share!
You can also fine me on Twitter & Instagram - @GettinJunkDone
Use this link to shop on Amazon, while supporting the channel!:
www.amazon.com...
Bugout Truck Build: • Bug Out Truck Build by...
Tool Reviews: • @GettinJunkDone Talks ...
#Ryobi #Chainsaw #CheapChainsaw
Hey Everyone, thanks for watching. Be sure to check out some of my other tool reviews using the playlist linked below.
th-cam.com/play/PLHRSPnh4bEkwTiDfESJ-QLP5OWo6wayYo.html
Do you even Chainsaw Bro?
Of course it won't turn the chain if you pinch or bind it.
Yes sir I agree maybe you should stick to sawzalls.
I just sold my stihl and bought one I use a chainsaw on a daily basis the first day of owning it I dropped a 24 in oak that was about 100 foot tall cut threw it like butter
Wont run the chain when trying to cut the base of the tree... What? Its pinched! Most saws wont do that lol. Chain has to be spinning when you contact wood otherwise your causing un necessary wear to your clutch and chain
Seriously was thinking the same thing, Ryobi are good tools
Exactly. Ive been using a ryobi 37cc 16 inch, and it is a fact that before you turn the saw sideways, you must rev it up, then turn sideways before contacting the wood. Actually even with a 60cc chainsaw, you must rev it up high before turning it sideways to cut. The tree shown in the video, i could have reved mine up high and went halfway through it, and let the chain cool down, then saw through the rest within about 10 minutes. The tree looked to be about 8 inches diameter
@@EarlGuyton425 if you're chain is getting that hot cutting on its side your oiler isn't working right, or your chain is dull... Occasionally I limb and daylight roads at work with mine for hours on end...
@@modifiedchevy I never said my chain got hot.
@@EarlGuyton425 said that you had to let your chain cool down... Assumed you meant it got hot lol my bad
Just got this chainsaw for 80 dollar brand new in the box from OfferUp. It’s a 14 inch but I bough a 16 inch Oregon bar and chain and now I got a great saw for a great price.
Hey, thanks for the comment. I’ll be addressing this on my next live stream, this Sunday night, September 6th, Episode #13.
Gettin' Junk Done okay 👌🏼
My friend bought the 16in on offer up for 70 and we where cutting down trees and I noticed that when I was cutting big trees the chain would stop moving inside the light and the motor would just make noise... it's a good saw but I feel like getting myself a echo maybe their motors have more torque
Bear 420 yeah, I may need a sthil or a echo but for now this little guy will do. My wife can use it for small stuff so that’s a win
Replace the chainbar, get an aggressive chain then mod the muffler and you got a great chainsaw way better than stihl.
I'm down for a better chain, but I don't know about modding the muffler.
Thats what everyone says. Adjust the carb how do you do that. Put a bigger jet in or what
Lol better than a sthil... not even close
@@adamnicholas176 Stihl works great while it's on but try to restart it.. well, that's stihl. In that case I go with husky or Echo never stihl
Adam Nicholas that’s what I thought
I bumped it up to the 16 inch model, for not much more. The engine is the same displacement, but configured a little different, also a hard case was included. I just needed a saw for light stuff around the house, maybe an occasional small tree. I have an larger saw from another manufacturer and needed new fuel lines. I didn't feel like tinkering that day, so I picked up the Ryobi. I considered a Husqvarna or Stihl, but the extra cost would just be wasted for my needs.
Nah dude you have the chain bound up cutting a tree perfectly horizontal like that
Hmm. I just bought a Ryobi 14" 40V Chainsaw. It's my first saw, but it cut down a 6.75" oak tree limb in a snap. No bogging and cut straight thru really smooth. It was actually fun to do! No smoke, fumes, and started instantly. Plenty of battery reserve cutting up medium and small limbs. Glad I didn't get gas.
I've had a refurbished Ryobi 3714 for several years now. Paid about $60 at Home Depot.
I've cut plenty of logs with it. Always fires up easy and just runs. Very reliable.
I definitely recommend getting rid of the factory "safety tip" on the bar--or even better, putting a good 16" bar and chain on it.
There's no doubt you can pay 3 times as much and get a more powerful, faster cutting chainsaw. If you need a more powerful, faster cutting saw, then you should definitely buy one of those. Basically, more power means you cut faster, and less power means you cut slower. If you don't need that extra power / cutting speed, the Ryobi 3714 is a really great little chainsaw for ~$60 that will handle logs up to about 11" diameter just fine with the factory bar and chain.
...and as others have mentioned, the video demonstration of the saw's supposed lack of power wasn't particularly enlightening. The chain should be moving when you contact the piece. The fact that a bound-up saw won't move the chain isn't a sign that a saw is "underpowered." You could definitely bind up a saw with a more powerful engine with the same result.
I have definitely changed my mind about this saw since posting this video. I generally keep it in my van for the emergency use or pop up side job, and keep my better saws secured at home for the scheduled jobs. If a saw is going to get stolen, the Ryobi is easier and cheaper to replace at any Home Depot.
Our new Ryobi 14 inch chainsaw never started. We did everything possible and followed the instruction exactly, including the trouble shooting. So we took it back to the store and got a refund.
Sounds like you got a lemon. My starts every time, just not a strong saw.
I got the same saw with a 14" bar. I would recommend it as a backup to a larger heavy saw. I got a 50cc for large trees and this small saw is great for trimming, climbing, and limbing. It is nice to put down the heavy saw when cutting all day.
I got the Ryobi 16" for an emergency for only $100. It did well but Topteng has one for $120-130 and it's 20" 62cc.
Both seem like a good deal.
You know, even a 3120 or 880 will have trouble pulling chain if you’re already making contact with the wood.
Had to laugh at that one, you always start the chain before contacting the wood...you don't try and just power through it when the chain has stopped. That's like pressing the blade of a circular saw against a piece of wood and then turning it on. Inexperienced user was what that was.
If you pull the muffler you will see the problem, the outlet on the cylinder is 5 times bigger than the exhaust on the muffler. Have a customer returned Remington same animal. To meet Carb requirments it's forcing already burned exhaust back into the saw. If you cut the internal baffels and open up the exhaust it will gain power, but of course void the warranty.
I appreciate your review. Helped me decide which saw to get for my husband based on your reasoning and recommended types of jobs. Very helpful, thank you!
I have the ryobi battery powered pole saw and this chainsaw and have 2 acres to maintain.. I dont use chainsaws all the time but I have used sawzalls and bow saws for yrs cutting little stuff and some bigger stuff and I'd still rather have ANY chainsaw over a sawzall any day, i have been able to cut more wood and pretty big trees with this Ryobi chainsaw than what i've been able to in yrs.. Yeah there are better saws for cutting humongous trees but I've cut a few big trees with this saw and a TON of medium sized 10, 12 inch branches with this.. With no problem at all, do i use it everyday? No, but it sure helps me get a helluva lot of work done and is better than a hand saw or sawzall..its alot quicker too than a sawzall.. it helps keep alot of good sized trees cut back on the fence line.. Plus allows me to cut them up fast..it can be used for property clean up in rural areas too, i dont just cut branches with it i cut decent sized trees with it..not humongous ones but not small ones by any means either.. I wouldnt use this saw to cut trees everyday with but it can be used for more than just storm clean up in my opinion..i'd still say its better than having a sawzall.. If you need to cut metal or do demolition/ construction work get a sawzall they are $20 at Harbor Freight, if you need a chainsaw and dont have one this is a pretty good buy for $100, my only regret is not buying one sooner..
I want to see someone part and mod one of these I've ran one and they are snappy high revving little saws......you must have got a bad one the one I used was surprisingly strong for its size
You are a great speaker im surprised this vid only has 200 views. Only thing i would add is that a cordless sawzall isnt so great for demo jobs. The batteries die fast and they just dont have the same balls as a plug in saw. good video thanks
Thank you so much for the kind words. I agree with your thoughts on the cordless sawzall. If you have the batteries, it''s no big deal. If not, a corded version is the way to go.
Just bought the 16in Ryobi chainsaw and I love it for myself and I'm 16 just to cut wood to make me some money
I payed $77 dollars for it to
I have the 16in model as a backup for limbs and such. I've had it almost 5 years now. Has ran great. Only thing u did was replaced the stock chain with a quality chain. Also I've used this for cutting wood as a secondary saw. I love it. I wouldnt buy anything else for a secondary saw. Put your money in the main saw and safety gear.
Which chain did you buy?
I got my first tree jobs with this 14 inch ryobi and I got through an 18.5 stump with it in about 3 minutes not fast but she rips
Nice, good work!
I am thinking about getting the 3714 reconditioned for 69, I got the blue max for 135, a 52cc and that saw is getting better and better after 15 hours of use. I figure my go 2 saw cuts down the tree, takes the trunk down to 6 inhes and let the ryobi take over the rest of the tree which is 2/3 the work thus saving my new best friend the blue maxfrom an early retirement. Also my electric chain saw has worn out making the 69 dollar backup look like a good gamble If I get junk, send it back and get one till I get one that works as it should. No reason for a hissy fit over a backup, You should read the reviews for the 25 percent who are mad as hell.
The chain that comes with aren't quality. My bar oil always leaks out. I have returned it but the other does the same thing. I am looking for a better chain. Do you have any recommendations on what kind of chains to purchase?
Try looking on the oregon chain website. You should be able to find a more aggressive chain that cuts a bit better.
The machine needs a bigger engine, that would definitely fix the power issue. My Craftsman 14 inch is proving to be great so far, I totally recommend it.
I run 2 of them hours and hours and have only had to re-tune them. I did replace the bar and chain with an Oregon. They aren't under power for my area. I mainly cut misquite and they do well.
That's great! They are good at what they are designed to do.
this saw is not a bad saw! Itwasn't made for cutting big trees, etc.
exactly should take care of the tree he was trying to cut but the blade was stuck any chainsaw name the brand would stop working when it gets pinched
I have an Echo CS-310 with a 30.5 cc engine and it has plenty of power for downing pretty good sized trees. You say the Roybi has a 37 cc engine and I'm wondering why the difference in power between the two, seems like the Roybi would be more powerful.
im 14 years old ive never owned a chainsaw but my dad has a jonsered 55cc do u think this saw would be good for me ?
Probably just be careful they can be very dangerous
i was under the impression 37cc is on the higher power end for a 14in chainsaw. so in general 14in chainsaw is not enough or just this brand?
Save the money to buy a small Echo. You will actually get a real Chainsaw. Yes it'll cost double or near double but do you want a Chainsaw or a get by saw. I bought a Ryobi 14 inch. Started good, ran good, then ran HOT ,then lost power. The fuel mix was right. Same fuel in my Echo. Echo still good. Ryobi junk. The best light Echo is the cs352. If you can afford it the cs490 is a professional grade . Light 50cc saw. I can't recommend this saw. Find a good dealer. Tell him you want 20% off. Echo offers a 20% off sale once a year. Big box store don't discount. Get a saw box. Learn how to file chains. NEVER run ethanol in anything with a carb. Mix 1 ounce Seafoam per gallon of fuel. Run saw at least every 2 months. Pour out old fuel. Yes you can burn mixed gas in cars.I mix new fuel every 3 months. Sthil cost a lot more than Echo. I'm of the opinion that Echo is the best saw for the price and my cs590 Timberwolf cuts as well as my brothers Sthil 391. So, spend wisely and enjoy you produces or go cheap and reap the troubles.
The echo is my next chainsaw for sure.
What? You must've got a bad one. I got the Ryobi 37cc 16" 2 weeks. Since then, I have cut down 6 trees that were about 10-12" diameter and bucked them all. Blue Spruce, Maple, one small Oak, and a few ash trees. I also cut many smaller saplings and a lot of limbing. I'd say all in all I have run it about 20-25 hours. Not only has everything worked without a hiccup so far, but I don't see much dulling in the chain yet either. And I today expected to be disappointed. At this point, the thing paid for itself. I would have shelled out a few thousand bucks for the work I've done with it thus far (when you factor in hauling away of debris).
Also, a sawzall with an arbor blade isn't a bad tool, I have one (corded) but it really doesn't compare to a chainsaw even for limbing smaller limbs. Besides, a cordless sawzall isn't very practical when you have a lot of work to do unless you have tons of batteries and chargers.
Great information brother because I knew very little of chainsaws until I saw your video
Glad I could help!
What other gas chainsaws are compatible with ryobi
It’s 150 now hardly a bargain
Can't agree more with you there.
Don’t look now. $300 now. Yikes.
Great content! This is exactly what I needed to know before my purchase. Thank you!
Great to hear!
What about a Ryobi 50cc 20" chainsaw ?
I got one for free made a deal with a guy to mow his yard and it runs pretty good
After watching this review I went and purchased the Ryobi 14" saw. As I began cutting through the first few logs I noticed that the saw bogged down and was starting to think I made a mistake. You see I grew up cutting wood and was a tree trimmer professionally. Back then we used McCulloch 14" saws for liming and small branches which worked great. I figure this Ryobi would be a practical substitute. The one thing that really is the only real draw back about this saw is the safety tip. I had personally never heard of or seen one prior to purchasing this saw and when I removed it, I noticed a significant improvement in the performance of the saw. If you want a good affordable day take the safety-tip off. If you want a saw that boggs on an 8" limb, then I guess keep it on.
The safety tip has nothing to do with how the saw runs or performs. It simply prevents the bar tip from contacting anything in the kickback zone.
Claims to be a former professional tree trimmer but then doesn't realize the safety tip doesn't affect performance or chain speed, etc whatsoever. Any performance improvement you thought you got from removing the anti kickback safety tip was in your head.
This is why you hire INSURED companies to come out no matter how proffesional they sound, like this guy.
I've never had a saw with the safety-tip on it and was wondering if maybe it was pinching the end of the bar? That would greatly hinder the proper operation of the saw.
I have noticed safety tips tend to clog up if cutting more green or wet wood. I take them off because sometimes it's nice to be able to make a plunge cut
I have one of these, the first thing you need to do is replace the chain with a good quality chain, the factory chain is crap
Once you
make the move from a cheap saw to a qualify saw you will never go back.
Wonder how it is compared to the 42cc Craftsman 14".
They make it in a 20 50 cc
I have used this Ryobi 16" 37cc saw for my limbing and small cuts (super lightweight, and a good inexpensive little saw for little projects) for over 5 years. Of course, I upgraded this Ryobi to an Oregon bar and chain to make it work well. But I digress. I never expected that this saw would become a staple on my dads property. I did not expect that it would be a little workhorse that would show up every day to limb, chop, and make short work of new growth. I am on my 3rd chain, and (as I explained, go OREGON bars!) my 2nd bar. Learn how to keep your chain sharp, so you are not buying a new chain when what you have just needs a little honing (imagine everyone throwing away their pocket knives, instead of sharpening them correctly).
Whatever saw you choose to take home, just remember the mantra of wise men everywhere.
'She is a fickle bitch. You have to learn just what she wants. Just what she needs, even if she will never articulate that fact to you. Use your Zen power, and figure out what she needs to be happy and grind hard. She will never tell you, so you had better figure that out for yourself. If you can unlock that mystery, she will stay by your side forever, and never let you down'.
Would this chainsaw be good for just cutting limbs off trees?
Hey Michael, after using this chainsaw for a while. I've completely changed my mind about it and now I recommend it as a first chainsaw or a home owner looking for an occasional use saw. It would work good for limbing trees, but not everyday. It's definitely not a professional saw.
Btw, I'll be using your comment during my live stream tomorrow night, episode 43. Hopefully you can check it out.
Does this saw even have sleeve. Poulan don't and is scores often
your dealing with a 14in bar you dont need all that safety stuff
14" bar will remove jawbone or knee caps same as 24" bar.
I think I going to get it it will be my first
Your video was great Dude... need to mod that beast! LOL 😂
Thanks for the info 👍🏽.
It's probably better than a Poulan Pro!
Probably!
Poulan Pro backpack blower is gold. The hedge trimmer----not so much.
Dude listen to you my 180 is a 32cc it will spiny chain fine you just talked me out of getting that green turd
I will go ahead and say it. I have a sthil MS 271 farm boss that came with a standard 20 inch bar. And I will say it now chainsaws are a hobby for me. Yes I said HOBBY. I recently got into chainsaw carving about literally 2 bays ago and my little McCulloch 3200 series chainsaw has about had it. And the sthil weighs about 12 to 13 pounds alone without the bar and that's heavy. Too heavy for chainsaw carving even if I put a 16 inch bar on it it's still going to be too heavy. So this man forgot a fourth group of people. And that is chainsaw carving. Which even though this ryobi may not be geared for it. As long as I don't blip the throttle and hold the throttle wide open for too long when I'm carving, the saw will most likely last as long as my sthil possibly can as long as I or anyone else takes care of a saw like the ryobi in this video
Hey Dylan, thanks for the comment! I'll be discussing this during my live stream tonight at 7pm EST, Episode 15 Sept 27.
Gettin' Junk Done nice. Shame I missed it though
Not a bad tool... cut a tree bigger than that in the vid with ease. Have to know how to use a saw.
lmao blames tool looking at video clip you posted clearly operator error get some saw knowledge before bashing a saw
I'm no expert, but not new to chainsaws. All I was saying was that I didn't like this saw so much. Any suggestions besides that?
@Gettin' Junk Done yeah, make sure the chain is moving when you make contact with what you're cutting. You're always going to bog the saw down otherwise.
Don't buy a ryobi chain saw. I bought two new ones over the years. They are junk.
I have 4 ryobi chainsaws and we heat our house with wood, I have used the shit out of these saws without no issues. I only run the premixed gas in the metal cans though.
maybe you got a dud Mine has worked great for over 4 years no issues and I run mine for hours.
My stihl 180c pulls 16 inch bar just fine it just proves that saw is a piece of shit
Chain was definitely pinched
Gettin' Junk Done, You just $aved me $ome money thank you!
That's the whole point. Thanks for watching!