I bought this after watching your video. LOVE-d it! I purchased from the link in the video in Feb, but the 2nd week of May the led's went out on the RPM and MPH. I messaged the company and they told me their products are only guaranteed for 30 days so I needed to just buy another set. Installed it and never had to touch it again. I am Fuming!
Or do what I did on my 03 and desolder the led for the light. I removed the led for the SRS and ABS. I hate ABS and it's making my rear brakes squeal on my 2011. Take the abs fuses out and the squeal instantly goes away!
Great vid but… you have skipped steps. Like how you got the wires threw the firewall? I’m doing this now and have watched this vid a few times. And still can’t figure out how you got the power wire threw firewall? Thanks again. Great vid. Your the reason I bought this speedo.
we have a video of the install, but company no longer produces the wheel, i have linked alternatives in the description of that video. link here - th-cam.com/video/RRiTiSzYO6c/w-d-xo.html
I just bought one. Couple of questions do the stock lights show through it can you still use the stick lights or once hooked up will it use their lights only?
@@CaswellCustoms ill do a video on tic tock and share it to IG and it hasn't been shipped yet because i ordered late yesterday i see ur video and was like hell yea i need one
What you need to do is rotate the needle all the way to he right, making sure to overlap the 120mph mark and your gear selection, and then when your rotating it, making sure it lands back PERFECTLY on 0mph. You need to do this either from 0mph, doing what I just said, or do it from where the needle sits when the cluster is completely off and sitting below 0mph. (I can't remember, but I did a cluster in mine with new needles and my cluster builder told me to do this and it worked)
ALSO - make sure the car is off, and no power is going to the cluster when doing this. Like when your needle sits below 0mph when the car has been off for about 30 minutes. Don't do this when the cluster has any power to it.
Do the lights turn on and off on with the ignition or do u turn the key and then press a power button? I saw the dimmer controller u stuck on by your factory headlight switch and dimmer. Just wondering if the led lights come on automatically with the ignition or not?
Ok sounds good. I think I’m gunna make that purchase. Thanks for all the info. I really enjoy watching Vinny build the GMC pre runner. I’ve been subscribed & watching the Chanel for a while now and look forward to the notification when a new video comes out. Keep up the good work Caswell Custom 🤙🏼
I have a quick question, I didn’t mark my needles and I put it back together and I can seem to get needles back to the right position, they keep going below 0, any help?
i have the same problem. did you find a solution for this? my needles fall below 0 and i can't see to get them working properly. guessing i'm going to need to get them recalibrated..
Unfortunately the supplier of the raw materials for the wheel went out of business in 2020 and the mold was made specifically off those materials so they’re unable to make any new steering wheels unfortunately!
HoustonRocket281 I really like having the touchscreen, they’ve pioneer has come out with some great options and they’ve made updates since I got mine 2 years ago.
Looks slick. I just so happened to be looking at the US Speedo overlays and stumbled across this one, which looks better and costs much less. Could you explain how/where you ran the power through under the dash and into the engine compartment? Other than that, looks all straight forward. Thanks!
@@CaswellCustoms hmmm thinking about getting this for my 2013 sierra. The outside is red with black accents but on the inside I have blue lights aside from red dome lights so this might look nice in there!
@@CaswellCustoms I may have to do it now. Haha by the way I love the videos especially since I've been into customizing the truck and your channel is basically centered around awesome upgrades for my body style. I also have the same grille and I love the look! Keep up the videos man!
Okay bc I have a 07 Silverado 1500 I wanted to know how to get the compass function on there also... does it have anything to do with adding a driver info control ?
I have my original gauge cluster for my 2007 Silverado 2wd everything works but when i put on my other cluster that came off a 2012 4x4 when i press the traction button nothing happens no traction light nor it doesnt take it off traction. If anyone knows whats wrong with it let me know
I bought this after watching your video. LOVE-d it! I purchased from the link in the video in Feb, but the 2nd week of May the led's went out on the RPM and MPH. I messaged the company and they told me their products are only guaranteed for 30 days so I needed to just buy another set. Installed it and never had to touch it again. I am Fuming!
What!!
Just purchased this after watching. Also straight forward and to the point. Thanks!
I love it, and while we're at it we can go ahead and put a piece of black tape over that God damn engine light that we "All" have.
Or do what I did on my 03 and desolder the led for the light. I removed the led for the SRS and ABS. I hate ABS and it's making my rear brakes squeal on my 2011. Take the abs fuses out and the squeal instantly goes away!
I have this same overlay i love it
Where did you get that steering wheel
Great vid but… you have skipped steps. Like how you got the wires threw the firewall? I’m doing this now and have watched this vid a few times. And still can’t figure out how you got the power wire threw firewall? Thanks again. Great vid. Your the reason I bought this speedo.
Where did u get that steering wheel?
we have a video of the install, but company no longer produces the wheel, i have linked alternatives in the description of that video.
link here - th-cam.com/video/RRiTiSzYO6c/w-d-xo.html
Can i use the same bulbs or i have to buy led bulbs for it ?
I never changed our bulbs still running the factory.
I just bought one. Couple of questions do the stock lights show through it can you still use the stick lights or once hooked up will it use their lights only?
No you don’t really see the stock lights through it, you need to wire up their lights.
@@CaswellCustomssounds good thanks.
All that just to have the same stock green digital color ?
Ending of vid
The speedo needle and rpm needle look like the are hanging further down past the start white line
Quick question is truck drivable without a cluster ?
It should be, but I’m not positive.
Does it light up exactly white? Cus mine show green
Why does it seem like the rpm gage dropped afterwards its all down by the where the miles are
It did, I didn’t have it lined up correctly.
Do you know if these clusters can be replaced with the Tahoe, Denali clusters, being the gauges are almost the same shapes? Just curious about it
Now it’s been a few years.. do the lights on it still work?
They do, but the truck has been in my garage being upgraded torn down and rebuilt since early 2021. So it hasn’t been used for the last 2 1/2 years.
What kind of steering wheel is that?
We have a full video of the install unfortunately the company that makes the wheel doesn’t manufacture it anymore.
Just bought one for my Silverado
Awesome! Send it to us on Instagram when it’s in!
@@CaswellCustoms ill do a video on tic tock and share it to IG and it hasn't been shipped yet because i ordered late yesterday i see ur video and was like hell yea i need one
Every time I set my MPH needle to 0 and attach everything back together. It comes back down, like all the way down... What can I do to fix that?
What you need to do is rotate the needle all the way to he right, making sure to overlap the 120mph mark and your gear selection, and then when your rotating it, making sure it lands back PERFECTLY on 0mph. You need to do this either from 0mph, doing what I just said, or do it from where the needle sits when the cluster is completely off and sitting below 0mph. (I can't remember, but I did a cluster in mine with new needles and my cluster builder told me to do this and it worked)
ALSO - make sure the car is off, and no power is going to the cluster when doing this. Like when your needle sits below 0mph when the car has been off for about 30 minutes. Don't do this when the cluster has any power to it.
Will this fit a 2012 tahoe?
Yes it will.
Do the lights turn on and off on with the ignition or do u turn the key and then press a power button? I saw the dimmer controller u stuck on by your factory headlight switch and dimmer. Just wondering if the led lights come on automatically with the ignition or not?
They come on automatically when you start up the truck.
Thanks for answering. I’m looking at buying the add w1 overlay for my 2013 Silverado. Is the switch just for dimming the gauge cluster lights?
@@Jsteezyfishing it’s just for switching between 2 very similar colors you can dim it with the factory dimmer.
Ok sounds good. I think I’m gunna make that purchase. Thanks for all the info. I really enjoy watching Vinny build the GMC pre runner. I’ve been subscribed & watching the Chanel for a while now and look forward to the notification when a new video comes out. Keep up the good work Caswell Custom 🤙🏼
What steering wheel do you have?
We have a full install video if you look back through our videos. It’s linked in the description and there is a discount code.
Is that a steering wheel cover or a different wheel?
Completely different wheel, we have a video of the install and a link to some options for new wheels.
I love it x 💯
Couldnt you have just taped it into the dash fuse box
You can, just not how I did it.
@@CaswellCustoms cause i believe there is an ignition fuse there as well. How are they holding up for you?
Would that fit a 2012 Yukon Denali by any chance? Looks super dope! I want that on my truck lol
Yes it will fit, they’re the same gauge cluster.
@@CaswellCustoms awesome thanks man! Definitely ordering it
@@CaswellCustoms I feel like I could never do it myself. I’ll mess something up. Do you know if shops do these types of jobs?
@@leonardogarcia9651 ya they would I think, pretty simple thing.
Will it fit an 07 GMC Yukon Denali xl
I have a quick question, I didn’t mark my needles and I put it back together and I can seem to get needles back to the right position, they keep going below 0, any help?
My rpm gauge also reads 700 rpms lower than its suspose to
i have the same problem. did you find a solution for this? my needles fall below 0 and i can't see to get them working properly. guessing i'm going to need to get them recalibrated..
Are you still doing the steering wheel
Unfortunately the supplier of the raw materials for the wheel went out of business in 2020 and the mold was made specifically off those materials so they’re unable to make any new steering wheels unfortunately!
Looks pretty cool . Ima get it and I like your touch screen double din. I think ima upgrade mine.
HoustonRocket281 I really like having the touchscreen, they’ve pioneer has come out with some great options and they’ve made updates since I got mine 2 years ago.
Caswell Customs thanks for the info boss. Can’t wait for more mods on the truck. Love the content.
HoustonRocket281 we really appreciate it! Thank you for the support!
Hello friend, where did you buy that item?
Link to it is in the description of the video.
It fit to tahoe 07-14?
Yes it will. 👍🏻
Looks slick. I just so happened to be looking at the US Speedo overlays and stumbled across this one, which looks better and costs much less. Could you explain how/where you ran the power through under the dash and into the engine compartment? Other than that, looks all straight forward. Thanks!
Will this fit a 2010 suburban
Yes it will, they use the same Gauge cluster.
Is it color changing? Or just blue?
TeeDub it color changes between 2 different hues of blue but they’re not very different.
@@CaswellCustoms hmmm thinking about getting this for my 2013 sierra. The outside is red with black accents but on the inside I have blue lights aside from red dome lights so this might look nice in there!
TeeDub I have mostly black and red accents in my interior and it looks great!
@@CaswellCustoms I may have to do it now. Haha by the way I love the videos especially since I've been into customizing the truck and your channel is basically centered around awesome upgrades for my body style. I also have the same grille and I love the look! Keep up the videos man!
Where can I get this?
Where you get your front fenders ?
Fiberwerx, check out our install video!
Hi there,still working???
What do you mean?
@@CaswellCustoms because I want to buy one of these,look pretty cool,and your video are helpful
Oooooooo that makes me want one for my 08 Silverado o.o
Me too, but the only thing I don't like is that add w1 put their logo on it. Would be much cooler if it said GMC, chevy, or even nothing at all.
Where can I get a cluster like this in red?
I’m not aware of one that comes in red unfortunately.
Is the cluster function with the odo and direction only for Sierras 🧐
No it’s for Silverado’s, Tahoe’s and Yukon’s also. They all have the same cluster.
Okay bc I have a 07 Silverado 1500 I wanted to know how to get the compass function on there also... does it have anything to do with adding a driver info control ?
@@johnsanchez8863 no it simply lays over your previous gauge
check engine light will be on when the engine isnt running anway
Ya it’s on when the keys turned to run but not started.
Very good
I have my original gauge cluster for my 2007 Silverado 2wd everything works but when i put on my other cluster that came off a 2012 4x4 when i press the traction button nothing happens no traction light nor it doesnt take it off traction. If anyone knows whats wrong with it let me know
Who cares if it's accurate anymore.. It looks the part.
Rpm needle dropped below the 0
Yes I messed up where I set the needles, I have to go back in and realign them.
Thats not a Guage cluster, that's a teenagers video game.
Okay
They only have blue no red
It don’t match ! Why didn’t you get the whole thing that’s got gas gauges and all… that’s like a half a one
it dies match look at whole vid
Where did you get the steering wheel?
How did you get the digital speedometer to show on the cluster?
What do you mean?
@@CaswellCustoms you got Instagram so I can text you right there?
@@dontworry8669 ya hit us up there
@@CaswellCustoms I already did