recently bought from @Delta Team Tactical. I got one in 6.5 Grendel. I haven't gotten a sling or a flashlight yet, but I spent just under $600. Really happy with it!! Love this series!
Nice build. I did one similar using bear creek and came out at $500. It’s no Gucci gun but it’s practical and accurate. Build consist of a knockoff bcm grip and stock, northtac p-11 red dot, Amazon flip ups, magpul mvg foregrip, a magpul p mag magazine, kak industries comp and magpul ms4 Qd sling. Ran only on steel so far but didn’t skip a beat
Yeah I build my own AR I had a very nice and fun experience doing it especially when the economy is jacked up right now some people live paycheck to paycheck we cannot all go buy a $1500 AR love ur videos 👍👍👍👍
Yes, easy fix. A lot of manufacturers over gas because out of the box it’s a simpler fix than under gassed. I’ll take care of it, thanks for the support 🙏🏽🙏🏽
I built my first ar15 with a PSA upper and JMT 80 percent lower. After my dad seen it and I took him shooting he had a lot of fun and wanted one himself but didn't want to spend much on one that wouldn't see heavy use so he got a build kit from Omega Manufacturing which is I think the same or owned by Delta team tactical. For just over $300 including cost of a lower he got a perfectly functional rifle. Now we go shooting together a couple times a month.
Even getting hot after 3 or 4 mags it ran like a champ and never had a malfunction, good job some people think you need a daniel defense or knights armament to have a gun that always runs, not true at all you can get low and mid grade that function reliably but obviously the higher end are for a reason but some might not need that or be able to push the rifle to the limits enough to see the difference.
Agreed, and I purposely ran the cheapest crap ammo to see what happened. I didn’t even lube the thing lol. Cheap 5.56 brass, and cheap 223 steel case and she just ate it up, I’m happy with it for what it is!
Agree, many kits seem to be over gassed but I guess that’s better than under gassed. And yea like you mentioned it helped with the steel case so that’s a win for me lol
So awesome to see the build in action! Looks like its running well! A little over gassed, I can tell, but I’m sure you’ll fine tune with time. Good job on the build, man! I hope to see more of this build in the near future! Good stuff, man!🇺🇸💪🏼
Thanks brother, yea for sure over gassed but typical on most budget guns. I’ll take it over under gassed I suppose lol. I appreciate it brother and thanks again for your contributions to the cause! 🙏🏽🙏🏽
Hell yeah, built my PSA rifle for around $750 before accessories. Didn't see a real "need" to spend over 1k on a rifle but to each their own opinion. Great build, keep them coming 👍
I have a PSA AR pistol. Great budget guns! Not really a need to spend over 1k unless you have a particular need for that or want to build it with “better” parts. Happy shooting brother
@@RidinDirtyOutdoors Working on my SBR PSA build as we speak 🤣🤣 just got the paperwork in and ready to purchase a new upper. Only thing I really change is the BCG, buffer and charging handle (obviously since factory handles are eh) 🤣 other than that, great budget guns that get the job done
@@RidinDirtyOutdoors haven't tried that one out yet, might take a look at it. I usually go with a nickel boron BCG but that's my preference. Phosphate is ok but cleaning and everything on the NB is much better
@@joshhunter935 yea WMD is my choice for nickel boron bolts, I have a couple of them. Using a good mag wheel polish keeps the nickel boron from being stained that darker color
Awesome Job Marine! Semper Fi! Where in NC is this range? I live in Sneads Ferry, just south of Lejeune and this little range looks AWESOME! You got a great reliable rifle there, I love my Peasant builds from Delta Team! Oh yeah, new subscriber too!
This is in Dudley, just outside of Goldsboro. I commute to work and prefer this range over the local ranges in Jacksonville. Less people and less hassle for me personally. Thank you for the support, I truly appreciate it 🙏🏼
Absolutely, I love being a Marine…but after hours I can’t handle a lot of them in a public setting. I enjoy peace and keeping a low profile. Appreciate your service as well, thanks for the conversation
@@RidinDirtyOutdoors That is exactly why I moved out to Sneads Ferry. When we moved there in 92, it was a small little sleepy town, now we are thinking of moving back to the mountains where I came from! Keep your Head on a Swivel Brother!
Ok, thanks for the information because i wanted to paint mine. And i'm ready to see more of the vids that you have coming out in the future. Be safe brother.
@@RidinDirtyOutdoors I choke up on the grip, with 2 fingers above the notch (not counting my trigger finger). But I used that grip in the military/combat for many years too.
@@SoloRenegade yea it’s still on all our service rifles, but I still don’t like it if I have the choice to get better. Also the grip angle on the A2 is subpar to most aftermarket offerings. But this is all subjective, if it works for you then do your thing 💪🏽
@@RidinDirtyOutdoors yup. my personal preference is either the A2 grip or the Magpul grip. Haven't found any other AR grips I like so far. Totally subjective, but I actually do chose the A2 over most other grips out there by choice and not necessity. I did swap out the A2 grip with the Magpul grip on my last combat deployment. But at home it's still 50/50 whether I use the A2 or Magpul.
Yea if you’re looking for just those parts head over to Delta Team Tactical and they have all the stuff. Can even get ballistic advantage barrels are a good price
Hello! I have been trying to find this setup on Delta Team Tactical website but I’m not able to find it?! Along with the lower. Any advice as to where I could find it would be greatly appreciated. Thanks a lot
On delta team tactical type in “Davidson defense choplifter” that will be a complete upper with a lower parts kit. All you need to do after that is find a stripped lower either online or locally. (Local is usually cheaper, because no transfer fee)
Great job bro!! Ms. Priss ran like a champ!!! Question how do feel about 6.8 mm ? Like it...hate it or just don't care? Once again you did cool as ice in winter. Stay safe you do you and let them haters do without when the shtf. Laters
Thank you Sir, I appreciate that. The 6.8 is a good round, very little felt recoil and a much more powerful round vs 5.56. For me personally with the limited availability of the cartridge and the price point…it doesn’t make it practical for AR platforms IMO. For a dedicated hunting rifle I wouldn’t mind one though
@@RidinDirtyOutdoors Thats what I would be using it for mainly. You can load lite say 45gr and go after coyotes and bobcars and fox then load heavier and go after sitka or colombia blacktails. Have to be blacktails since NO whitetails in ca. I LOVE LOVE going after ptedators. Laters.
@@RidinDirtyOutdoors Well its a good dream bro. But I might as well face the truth that my hunting and shooting days are over as much as it kills me to think it. I feel heart sick and pains me to the nearly to tears to write. Well I gotta go. Laters bro. Stay safe.
@@RidinDirtyOutdoors I have nothing against cheap. I built a couple rifles back in 17 and 18 w bear creek barrels that were like 40 bucks back then. Damn things still shoot fine. I. Appreciate what you do brother!
With the 400 dollars you can buy only a pistol in Turkey. Those Ar-15 rifles or other rifles forbidden in my country. That is awful. I'm jealous to americans.
This build gave me hope on building and owning an ar15, especially when money is thight. Thanks a lot.
You’re very welcome 💪🏽
Don't let others dictate what you need. Build something that that is for you. I fell for this many years ago when I got my 1st AR.
Get a quality barrel and bcg.
@@madride858585again, not the point of this build series….reading is key.
recently bought from @Delta Team Tactical. I got one in 6.5 Grendel. I haven't gotten a sling or a flashlight yet, but I spent just under $600. Really happy with it!! Love this series!
That’s awesome man, have fun shooting that thing. But make sure not to go broke buying a ton of 6.5 lol!
@@RidinDirtyOutdoors Yeah, it's not cheap, that's for sure, lol!
It‘s 18 months after your Delta Team Tactical Build. I would appreciate receiving what complete info. you have on your Build. Well done! Thanks, John
What complete info would you like Sir? I went over every part used in this video series. Unless you’re wanting an update on how it’s doing?
Do you have a round count update?
Nice build. I did one similar using bear creek and came out at $500. It’s no Gucci gun but it’s practical and accurate. Build consist of a knockoff bcm grip and stock, northtac p-11 red dot, Amazon flip ups, magpul mvg foregrip, a magpul p mag magazine, kak industries comp and magpul ms4 Qd sling. Ran only on steel so far but didn’t skip a beat
That’s awesome, it’s fun building cheap stuff and showing people that it will run
Yeah I build my own AR I had a very nice and fun experience doing it especially when the economy is jacked up right now some people live paycheck to paycheck we cannot all go buy a $1500 AR love ur videos 👍👍👍👍
Exactly Sir, you can build hell of a rifle for under $1500. Times are definitely tough and don’t see it getting better any time soon
Nice to see it in action and running good. Over gassed but that can be corrected with heavier buffer and spring change. Thanks for sharing.
Yes, easy fix. A lot of manufacturers over gas because out of the box it’s a simpler fix than under gassed. I’ll take care of it, thanks for the support 🙏🏽🙏🏽
I built my first ar15 with a PSA upper and JMT 80 percent lower. After my dad seen it and I took him shooting he had a lot of fun and wanted one himself but didn't want to spend much on one that wouldn't see heavy use so he got a build kit from Omega Manufacturing which is I think the same or owned by Delta team tactical. For just over $300 including cost of a lower he got a perfectly functional rifle. Now we go shooting together a couple times a month.
That’s awesome! And yes, Omega, DTT, and Davidson Defense are all essentially the same company
well done. liked the build, the paint, and the choices. Thank you for your continued service, be careful out there.
Thank you very much Sir, I appreciate it
Nice rifle. Here’s comment for the algorithm.
Thank you!
It sure ejected that steel case in a different direction from the brass case. That was interesting. And as far as the rifle. I'd say it's a winner.
Just glad it’s a bit over gassed so it could shoot the steel out without issue. Thank you 🙏🏼
Actually bad ass color scheme with the pattern.
I appreciate that, not bad for a couple dollars in spray paint and some stickers lol
great video! ☺️
Even getting hot after 3 or 4 mags it ran like a champ and never had a malfunction, good job some people think you need a daniel defense or knights armament to have a gun that always runs, not true at all you can get low and mid grade that function reliably but obviously the higher end are for a reason but some might not need that or be able to push the rifle to the limits enough to see the difference.
Agreed, and I purposely ran the cheapest crap ammo to see what happened. I didn’t even lube the thing lol. Cheap 5.56 brass, and cheap 223 steel case and she just ate it up, I’m happy with it for what it is!
I think it looks great. It does look a little over gassed with the mag of 556. Steel 223 looked good.
Agree, many kits seem to be over gassed but I guess that’s better than under gassed. And yea like you mentioned it helped with the steel case so that’s a win for me lol
Building my very first ar15 hopefully in the next few weeks when all the parts come in. Going to paint it FDE
Excellent!!! It always gives me jitters waiting on parts
“Peasant elite” 😂 this got me inspired
Hell yea! That’s the goal
I have a full Anderson rifle with everything comes out to just around $1000. My IWI 12.5 came out to the same amount.
I have a full Anderson build also, I put a lot into it though lol, maybe too much
@@RidinDirtyOutdoors Never too much as long as it’s function not form.
@@kaos_actual1694 oh yea I love the rifle, it works
Decent build for sure!! I did notice it is a bit over gassed. You could check out sprinco springs and or heavier buffers. Cool build !
Definitely, better than being under gassed for sure. I’ll check em out, thanks 🙏🏽
Great series. Very informational.
Thank you very much
So awesome to see the build in action! Looks like its running well! A little over gassed, I can tell, but I’m sure you’ll fine tune with time. Good job on the build, man! I hope to see more of this build in the near future! Good stuff, man!🇺🇸💪🏼
Thanks brother, yea for sure over gassed but typical on most budget guns. I’ll take it over under gassed I suppose lol. I appreciate it brother and thanks again for your contributions to the cause! 🙏🏽🙏🏽
@@RidinDirtyOutdoors youre very welcome! I’m glad that grip went to a nice rifle! 🇺🇸💪🏼
Hell yeah, built my PSA rifle for around $750 before accessories. Didn't see a real "need" to spend over 1k on a rifle but to each their own opinion. Great build, keep them coming 👍
I have a PSA AR pistol. Great budget guns! Not really a need to spend over 1k unless you have a particular need for that or want to build it with “better” parts. Happy shooting brother
@@RidinDirtyOutdoors Working on my SBR PSA build as we speak 🤣🤣 just got the paperwork in and ready to purchase a new upper. Only thing I really change is the BCG, buffer and charging handle (obviously since factory handles are eh) 🤣 other than that, great budget guns that get the job done
@@joshhunter935 lol yes the bcg is a must for me also. I actually tried the PSA customs fathers of freedom bcg, it’s pretty good.
@@RidinDirtyOutdoors haven't tried that one out yet, might take a look at it. I usually go with a nickel boron BCG but that's my preference. Phosphate is ok but cleaning and everything on the NB is much better
@@joshhunter935 yea WMD is my choice for nickel boron bolts, I have a couple of them. Using a good mag wheel polish keeps the nickel boron from being stained that darker color
Thank you for showing us the budget side of kicking ass. Been looking to build a Broke Boi special
Of course! We have to budget during these tough times
Is that mft pistol grip? I'm using it on my builds. I like it for angle and comfort of it
@@coyote.precision.tactical it is, a buddy sent it to me 🤙🏼
Keep up the work man.
@@coyote.precision.tactical yes Sir, thank you
Bro this is lit 🔥!!!!
Thank you 🙏🏽
Been looking forward to this (came here from your reply 9 - just in time for any possible President's Day sales too.
Heck yea!!
Sweet rig
you did great job rifle build also great video!!!!
Thank you very much
Set up turned out really nice !! Sweet rifle for $700 !!!
Thank you, I appreciate that!
It turned out awesome!!!
Thank you very much 🤙🏽
Build turned out very nice 👌
I appreciate it
Love it brother. Can we see some tac shotgun action
I’ll see what I can do 🤙🏽
Awesome Job Marine! Semper Fi! Where in NC is this range? I live in Sneads Ferry, just south of Lejeune and this little range looks AWESOME! You got a great reliable rifle there, I love my Peasant builds from Delta Team! Oh yeah, new subscriber too!
This is in Dudley, just outside of Goldsboro. I commute to work and prefer this range over the local ranges in Jacksonville. Less people and less hassle for me personally.
Thank you for the support, I truly appreciate it 🙏🏼
@@RidinDirtyOutdoors I'm with you, don't really like the ranges we have around here. Appreciate ya!
Absolutely, I love being a Marine…but after hours I can’t handle a lot of them in a public setting. I enjoy peace and keeping a low profile. Appreciate your service as well, thanks for the conversation
@@RidinDirtyOutdoors That is exactly why I moved out to Sneads Ferry. When we moved there in 92, it was a small little sleepy town, now we are thinking of moving back to the mountains where I came from! Keep your Head on a Swivel Brother!
@@Big88Country not a bad idea, sneads ferry is a popular spot now.
Always brother!
You mean desert tactical sent the pistol grip even though you have 2 different addresses ? Rad !
Hahaha he did! 😅😅
Wait… what? Lol
@@DesertTactical he’s referencing how the sling company didn’t send their product due to me billing/shipping addresses being different but you did lol
@@RidinDirtyOutdoors yeah. Haha I caught that. I should have asked for verification of residency prior to sending that grip…🤣🤣🤣.
@@DesertTactical haha GOTCHA
I'm very impressed with the build that you have done, and would like to know where you bought your decals from when you painted this AR.
Got mine on ebay, they have them on Amazon also. Just look up multicam rifle vinyl and a ton of patterns will pop up
Ok, thanks for the information because i wanted to paint mine. And i'm ready to see more of the vids that you have coming out in the future. Be safe brother.
@@vincentmartinez9865 awesome, hope it turns out great Sir. Thanks for the support 🙏🏽
@@vincentmartinez9865 awesome, hope it turns out great Sir. Thanks for the support 🙏🏽
Its good to have an over-gassed rifle to cycle that steel .223, Daniel Defense purposely over-gasses their rifles for that reason
yea a lot of manufactures default to a bit over gassed! Thanks Sir
Awesome, I always forget things when I'm going to the range too, good thing mine is close !!!!
I’d forget my head if it wasn’t attached
nice build
Thank you
From what I know a lot of what DTT .. Davidson Defense and I think they have one more website they run is Bear Creek Arsenal stuff.
Davidson, DTT, and Omega
I like the A2 grip
It definitely works, but the finger notch annoys me after shooting more than 15 mins at a time
@@RidinDirtyOutdoors I choke up on the grip, with 2 fingers above the notch (not counting my trigger finger). But I used that grip in the military/combat for many years too.
@@SoloRenegade yea it’s still on all our service rifles, but I still don’t like it if I have the choice to get better. Also the grip angle on the A2 is subpar to most aftermarket offerings.
But this is all subjective, if it works for you then do your thing 💪🏽
@@RidinDirtyOutdoors yup. my personal preference is either the A2 grip or the Magpul grip. Haven't found any other AR grips I like so far. Totally subjective, but I actually do chose the A2 over most other grips out there by choice and not necessity.
I did swap out the A2 grip with the Magpul grip on my last combat deployment. But at home it's still 50/50 whether I use the A2 or Magpul.
@@SoloRenegade that’s just it brother, if it works for you that’s all that matters! Happy shooting
This maybe asking to much is there anyway you can list where to buy the hand guard,barrel,an 80% lower? I have everything else
Yea if you’re looking for just those parts head over to Delta Team Tactical and they have all the stuff. Can even get ballistic advantage barrels are a good price
Have you bought much stuff from bereli? Saw your video on the red dot for $99 and want to get it for my Glock 19 if it will fit.
The $99 is the Rmsc cut, Is you me Glock custom milled for RMSc or RMr?
@@RidinDirtyOutdoors hmm… not really sure actually. I have a standard Glock 19 gen 5
So it’s not cut for an optic at all?
@@RidinDirtyOutdoors I know the optics that the gun comes with can be removed and replaced with something else.
@@kamrandettling9858 what optic did it come with?
Hello! I have been trying to find this setup on Delta Team Tactical website but I’m not able to find it?! Along with the lower. Any advice as to where I could find it would be greatly appreciated. Thanks a lot
On delta team tactical type in “Davidson defense choplifter” that will be a complete upper with a lower parts kit. All you need to do after that is find a stripped lower either online or locally. (Local is usually cheaper, because no transfer fee)
Not the same exact setup as mine but close enough.
Their inventory and prices change from time to time
Nice build, but damn that light is big.
Haha it is, has since been replaced.
It’s what the people voted on
@@RidinDirtyOutdoors I know. I’ve seen the previous videos, but damn. Build still nice.
@@FirearmJunkyBlick appreciate it
I like this video series
Thank you so much
Mission success with the wife. And now I can buy accessories that cost me an arm and a leg
Nice! Get it lol
cool series... you actually live kinda near me..
is that a public rang or is it on base?
Public range out in Dudley NC (outside Goldsboro)
What plate carrier is that? I'm a big guy and mine looks really small on me that one looks like it a bit bigger
It’s from Trident Tactical
You forgot to $350 paint job
I forgot to paint job?
"gimmie that edc"
The targets are fucking funny man
Standard combat targets we use 🤷🏽♂️
Great job bro!! Ms. Priss ran like a champ!!! Question how do feel about 6.8 mm ? Like it...hate it or just don't care? Once again you did cool as ice in winter. Stay safe you do you and let them haters do without when the shtf. Laters
Thank you Sir, I appreciate that.
The 6.8 is a good round, very little felt recoil and a much more powerful round vs 5.56. For me personally with the limited availability of the cartridge and the price point…it doesn’t make it practical for AR platforms IMO. For a dedicated hunting rifle I wouldn’t mind one though
@@RidinDirtyOutdoors Thats what I would be using it for mainly. You can load lite say 45gr and go after coyotes and bobcars and fox then load heavier and go after sitka or colombia blacktails. Have to be blacktails since NO whitetails in ca. I LOVE LOVE going after ptedators. Laters.
@@paulmarshal766 sounds like a good deal then. As long as it works for you I say it’s worth it
@@RidinDirtyOutdoors Well its a good dream bro. But I might as well face the truth that my hunting and shooting days are over as much as it kills me to think it. I feel heart sick and pains me to the nearly to tears to write. Well I gotta go. Laters bro. Stay safe.
@@paulmarshal766 later brother, keep your head up. You’re still standing and breathing, enjoy life to its fullest as best you can
Yeah buddy
Because has that beat by a mile and you know it and they have options to go anywhere in size or caliber for less 🤔
What? Who?
How’s it holding up today?
Great, have done a couple update videos since this and just uploaded some last week using this rifle
@@RidinDirtyOutdoors Ooh right on. I’ll go check em out thanks 👍
@@Brancovtn65 th-cam.com/video/230lJko4Udc/w-d-xo.htmlsi=KmzzlaXyvqm5gCFj
@@RidinDirtyOutdoors Hell yeah. You’re the man.
Just start w a good barrel
Agree, but this series was purpose built to be really cheap
@@RidinDirtyOutdoors I have nothing against cheap. I built a couple rifles back in 17 and 18 w bear creek barrels that were like 40 bucks back then. Damn things still shoot fine. I. Appreciate what you do brother!
@@wardboy814 thank you Sir, appreciate it. And a good barrel is a pretty great investment
That’s really not a bad price. It’s about what I paid for my poverty pony with a Holosun 503c and a magnifier back in 2018.
I like Andersons too haha
You should be able to get monetized, I an but I've never gotten a check !!!!!!!!
I’m not gonna bother until I get a lot more subscribers. You’re eligible at 1k but won’t make much at all
HACFTA
Brjtnw
Beautiful build I build my thundertactical for 430$ and let me tell you buddy it’s a beast.I will subscribe check my channel out brother thank you!!!
That’s awesome! I’ll check you out also 💪🏼
With the 400 dollars you can buy only a pistol in Turkey. Those Ar-15 rifles or other rifles forbidden in my country. That is awful. I'm jealous to americans.
Found you on IG
Awesome 👏🏽
Great video series! I am going to attempt my first build. Can you send me your email for a few questions before I get started? Thanks!
That’s awesome! Thank you
My email is located in my channel bio, let me know if you can’t find it.