Super impressive Dan! It’s such a pleasure to watch someone who really knows their stuff. I quite like those gloves! Thanks again for a great video - perfect to watch in a coffee break!
What in da hell did I just watch? 19mins worth of a magic show ? Firstly there was GLOVES ? Secondly floating camera angles ? Look Ma no hands 😂 Highly impressed by your professionalism and production improvements mate !! It’s always a pleasure to watch grow and improve! Thanks Dan for another one
I like a Worcester repair am glad Worcester made so many parts to specifically fail they keep me in work! Am sure Worcester could source some plastic that does not turn to mush on the flow adaptors but nope they continue to make them! Great video enjoyed it all. also a brave man working on the cream carpet am sure I would have knocked that tea over and got a few splashes of black system water on it!
My mate who used to work for Worcester is so quick last year we did one in a loft right hand block left hand block platt pumped up expansion vessel new prv all done in less than a hour lol
Thank you mate, yes you can get another option with no DV and a few other bits missing. It’s about £60 cheaper. But they’re a special order at my place so I just normally use this one. Thanks for the support buddy 🙏🏽
As a non plumber looks intimidating to get back there but like ya said guess its experience. How ya filming Dan it’s a great pov gonna be able to make some great content like this it’s like we there ❤
Is it worth repairing a 15 year odd old boiler with £160 in parts and probably £150 in labour. Next few months the left hand block will go or the fan pcb etc etc they just become a money pit after a while...
You have got a point but with most boilers nowwell over £1000 it's worth repairing them and with the cost of living now not money people have got that money
I hate that hand shredding Cr#p ! Not a fan of repairing WB boilers, the oil stuff is even worse than the gas. I am genuinely mystified how they were Which magazine top pick for so long? As all the service guys I know think the same as me........
I don’t mind repairing them to be honest, it’s good money and normally straight forward. But you’re right they do cut your hands to piece’s haha, as for which magazine, I’m not sure who votes for that.
@@Heatking I repair them but don't like them. Baxi cheaper, easier to work on, spares better priced and a Technical dept who are not RUDE on the odd ocasion I ever have the need to call. ( unlike WB muppets) To me Baxi beat WB hands down on all counts . Vailiant all the way though, IF the customer has the funds...... Have a good week mate. 👍
Boggles my mind when a customer pays that kind of money to keep a 14 year old boiler going. I also heard you say you stripped it down last year also. Literally could have bought and fit a new one. Totally not a dig at you btw. Great vid
Sorry didn’t mean strip it down, I meant replaced the flow turbine adapter last year haha. Never serviced this boiler. Its a customer what doesn’t get it serviced just repaired 🙄 cheers for the support mate 🙏🏽
Please Like this video if it’s helped you out… or you’ve enjoyed it.. ❤
Love a right hand block change lol - great work brother!
Thank you very much buddy. Appreciate your support Chigs ♥️
Super impressive Dan!
It’s such a pleasure to watch someone who really knows their stuff.
I quite like those gloves!
Thanks again for a great video - perfect to watch in a coffee break!
Thanks very much Steve! Glad you enjoyed it! Yeh these gloves are a decent quality, can’t remember who’s brand they are though 😂😂
What in da hell did I just watch?
19mins worth of a magic show ?
Firstly there was GLOVES ?
Secondly floating camera angles ?
Look Ma no hands 😂
Highly impressed by your professionalism and production improvements mate !!
It’s always a pleasure to watch grow and improve!
Thanks Dan for another one
Thanks for the support mate as always. Tried a chest mount on this, although it wasn’t the best. Hopefully I’ll get back haha!
Have you got any tips to change a red seal on a worcester erp, they're a nightmare as the electrodes are joined
I like a Worcester repair am glad Worcester made so many parts to specifically fail they keep me in work! Am sure Worcester could source some plastic that does not turn to mush on the flow adaptors but nope they continue to make them! Great video enjoyed it all. also a brave man working on the cream carpet am sure I would have knocked that tea over and got a few splashes of black system water on it!
Haha cheers mate, I enjoy repairing them too! And you’re right I’m sure they could make something a bit more robust!
Thanks, love the new pov
Thank you very much Matt 👍🏼
Amazing video and what screwdriver do you use please
Wera ones, and a regin slotted for removing o rings 🙏🏽
Excellent work 👍👍👍
Thank you very much matey!
@@Heatking you’re very welcome take care 😀😀👍👍🇬🇧🇬🇧
@@marcusmaximus451 and you buddy 🤞🏽
Impressive mate. Keep up the good work
Thank you very much Rob!
That green boot as WB's solution to a design fault is still priceless. Don't bother fixing the design make an umbrella
We know it’s going to leak so we’ll put a hat on it for when it does 😂
😂😂😂
Can u explain we dont have these boilers here haha.
Top vid mate, do love the challenge of a WB 👍🤪
Haha Cheers Chris 🙏🏽 they seem to keep me in work 😂😂😂
Thanks
Thank you very much as always Alex ♥️
@@Heatking keep up the good work 👏
Good work Dan. Not an easy job
Thanks Brian! ♥️🙏🏽
My mate who used to work for Worcester is so quick last year we did one in a loft right hand block left hand block platt pumped up expansion vessel new prv all done in less than a hour lol
Haha yeh I bet he’s done many of them! 🙏🏽
@@Heatking yes he's been a good friend over the years used to give my number out to people learned a lot from him over the years
Have you got any tips to change the red seal on a Worcester erp, the electrodes are connected. I find them a nightmare.
I’ll get a video on it mate. When I’m next at one :)
Great content mate.
Much appreciated mate
Good job
Thank you very much
Another great video mate, you even wore gloves! But where was the intro? 😂 Take care and stay safe bud
Did I not put an intro in? 🤦🏽♂️😂😂😂 thanks buddy, and you too 🙏🏽
No intro 😂. Told the mrs I was watching Stacey, she said how is he 😂 😂
@@Bigdaftboy 😂😂😂 glad to know at least someone asks how I am 😂😂😂
Top job Dan. That was in depth as usual..❤ you know the rhb you just fitted is there different options like without diverter motor etc?
Thank you mate, yes you can get another option with no DV and a few other bits missing. It’s about £60 cheaper. But they’re a special order at my place so I just normally use this one. Thanks for the support buddy 🙏🏽
@@Heatking nice one thanks for that it is worth knowing as a newbie
@@ArifPolicewala it is mate. If you don’t get one just make sure you study the two so you see what’s missing.
@@Heatking thanks for that really appreciate it
Where can I get them orange gloves from
They’re from toughglove mate offline 👍🏼
As a non plumber looks intimidating to get back there but like ya said guess its experience. How ya filming Dan it’s a great pov gonna be able to make some great content like this it’s like we there ❤
Thanks mate, it’s daunting the first one, but the more you do, the easier it gets :) chest mount is what I was using on this one :)
New boiler time 👌🏼
Couldn’t seal
The deal
Mate :(
How much to charge for this job plz I got one to do tks
£280 Inc materials
Tks
Great vid but £280 that means your only making £80 way too cheap last two I’ve done have been £450 incl prv and f/a
@@gmtplumbing8559 cheers mate. I get the parts (manifold, prv and adapter) for £180 total, £100 to do it, still cheap I suppose you’re right 😂
Is it worth repairing a 15 year odd old boiler with £160 in parts and probably £150 in labour. Next few months the left hand block will go or the fan pcb etc etc they just become a money pit after a while...
Probably not to be honest mate, but I always give the customer the two options. 🙏🏽
You have got a point but with most boilers nowwell over £1000 it's worth repairing them and with the cost of living now not money people have got that money
@@charliewillis8527 yeh I’m noticing that much more these days. People just simply don’t have the funds
Good old worcester. I just take the full lot out now. Cannot be arsed wrestling with it.
Haha I might film the next one and take the whole lot out. See if it’s any easier
@@Heatking I only do it if it has a bypass. If not, then pump and rhm
@@colin4685 yeh it’s only the cdis without the bypass i believe
put hacksaw through manifold beyond the by-pass (don't cut through by-pass 😂) makes life easier mate 👍
Good shout is that mate! Or the multitool haha
I hate that hand shredding Cr#p ! Not a fan of repairing WB boilers, the oil stuff is even worse than the gas. I am genuinely mystified how they were Which magazine top pick for so long?
As all the service guys I know think the same as me........
I don’t mind repairing them to be honest, it’s good money and normally straight forward. But you’re right they do cut your hands to piece’s haha, as for which magazine, I’m not sure who votes for that.
@@Heatking I repair them but don't like them.
Baxi cheaper, easier to work on, spares better priced and a Technical dept who are not RUDE on the odd ocasion I ever have the need to call. ( unlike WB muppets)
To me Baxi beat WB hands down on all counts .
Vailiant all the way though, IF the customer has the funds......
Have a good week mate. 👍
@@julianhawker7672 yeh I love Baxi too aswel to be fair. But not a fan of valiant, purely because I find them complicated 😂 have a good week to mate.
That was some boiler repair voodoo shit right there. Great content as usual Dan
@@richardlane5417 thank you very much Richard 🙏🏽🙏🏽
🤘😎🤘
Cheers Wayne 🙏🏽
Boggles my mind when a customer pays that kind of money to keep a 14 year old boiler going. I also heard you say you stripped it down last year also. Literally could have bought and fit a new one. Totally not a dig at you btw. Great vid
Sorry didn’t mean strip it down, I meant replaced the flow turbine adapter last year haha. Never serviced this boiler. Its a customer what doesn’t get it serviced just repaired 🙄 cheers for the support mate 🙏🏽
Your better of doing the platt as well Dan other wise your be back ther you know ther like magnetic filters lol
Haha more than likely mate. I think it was ready for a new boiler that one.
You’re a bit of a skin flint with the silicone grease mate 😂😂
@@paulbrown4850 😂
Soon need to be replaced
Your making me RAGE😂 I’ve never known a Worcester not to leak.
😂😂😂😂 I love fixing them though
They are a repair engineer’s dream boiler.
@@stevedevois8452 absolutely and normally make good money out of them haha
Poor design using all plastic, i do one of these a week minimum
Also i always take a flow turbine adapter too
Yeh me too, this one had been changed within 12 months though so hopefully be ok 🤞🏽
Yeh really poor design but good for earning haha
@@Heatking yea nice job mate! Tbf i commented before fully watching the video😂
@@joncoke8208 haha cheers buddy
Never hated a boiler as much a Worcester greenstar terrible design everything’s awkward to change
Absolutely agree but I enjoy them making me money 😂😂
@@Heatking my hands look like ive been bare Knuckle boxing after changing the PRV on them but I agree any job is worth it if the money is right 😂
Leaking Worcester boiler eh🤔🤔 is there any other kind of Worcester🤷♂️
😂😂😂 you’re not wrong there!
@@Heatking I seem to leak just as much blood if I even walk past one👌😂😂
@@dombarnes7092 😂😂😂