Bosch GTS 10J Table Saw Unboxing and Initial Review
ฝัง
- เผยแพร่เมื่อ 17 ก.พ. 2021
- In this video I am unboxing my new Bosch GTS 10J Job site Table Saw that will go in my small workshop.
I bought this with my own cash so isn't sponsored. I picked Bosch as it’s a reasonably priced high end piece of kit and I generally like Bosch with several tools and appliances that I own being Bosch.
I give you a bit of a tour of the features on the table saw and a review of performance and my initial thoughts.
Enjoy and remember to subscribe! - แนวปฏิบัติและการใช้ชีวิต
![[#SHORTS CLIP] ครูอึ้ง กรรมการอึ้ง ฮ่าๆ l ซานิเบาได้เบา l One Playground](http://i.ytimg.com/vi/qeBTuMJs4t0/mqdefault.jpg)
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
Thank you for posting this, I think I'll take the jump and get this one.
Nice one Bern, i really like the saw. Let me know how it goes.
Just bought one of these, arrived today, very helpful review, thank you.
You're welcome, glad the review helped. I've been using mine a lot over the last couple of months and I really love it.
@@MATTDOESSTUFF2020 Have you made a cross cut sled for it yet? If not, would you consider doing a video of making one?
I have made a crosscut sled for it. its one I made for my previous saw, adjusted for the width of the mitre tracks. Its a pretty simple design. I could maybe do a video talking about all the jigs/sleds I have for it.
@@MATTDOESSTUFF2020 That would be brilliant, thank you Matt.
Dude totally winged this which I loved... Nice Ito say someone doing as they go, so to speak. Often get board with the trimmed and over prepared reviews, so well done!
Thanks Matt, great video. I’m off to buy one 😊
Nice, thanks. Its a great saw, im loving it tbh.
Got one of these. Good saw other than the awful mitre guage and non standard mitre slots ( meaning you can’t easily find an aftermarket alternative). I made a zero clearance insert which you will need when cutting thin strips. Bosch should follow industry std for mitres which would make this saw more useful.
Yeah i like the saw but i agree the mitre gauge is rubbish. other than that i find it super accurate, maybe thats where you need to spend more money again to get a saw with a good one
Nice bit of kit mate.
Yeah, its a nice saw. Going to make all my projects just that little bit more accurate. Hopefully!
Proper jealous, that's a nice saw. Although I nearly had kittens watching you drag it out the box one handed!!
Its made for lugging around! That roll cage is solid.
Yeah, I thought the same, pretty strong guy!
Thanks for the review. Im looking to buy these gts 10 j next month. Only this model is available in malaysia. Other bosch model is not available.
No problem, its a great saw, really robust and well worth the money. i have been using it a while now and i love it
Great video, thanks! I think you convinced me to buy this saw as I have limited space in my workshop and my current cheap table saw takes up too much space. Will this saw take a 100mm (4") hose from a dust extractor or will I need to get an adaptor to allow the 100mm hose to fit?
Nice its a great saw, i love using it. Its not got an attachment for a 100mm hose. Out of the box it comes with a connecter for a shop vac so maybe 35mm diameter. So yeah i think you would need to biy something for it
Can this table saw using saw blade with 7 inchs diameter ?
Great review thanks for posting! 2 years on are you still enjoying it? Thinking of getting one to replace my cheap titan. Love that the riving knife is adjustable, but can you confirm it can go below the blade height so you can use a sled? My current riving knife is higher so I'm forever taking it out and putting back in. Also it's too high to use a gri-ppper which is one thing i want to get as i had my first kickback the other day which scared me sh**less!
Yeah i love it. the mitre gauge isnt great but then i dont think most are.
i use it with a sled. the riving knife doesn't go all the way down but drops just below the height of the blade so you can use a sled no problem.
Great review. Is the measurement scale just mm or does it have inches too out of interest?
It doesn't have inches on the version i got, just mm
Does it have the play in the fence after you lock it in place?
No, its solid. I really like the saw having used it for a while now. The guard moves smoothly and locks firmly in place, its a very good.piece of kit.
Has anyone found the spanner that shows as comes with this No. 22 (image K3) in the manual, it's the only thing I haven't found yet? (just out of box).
I think its behind the push stick.
Although im not at my table saw so im assuming its the blade spanner youre talking about. Which is in an insert on the side, i think behomd the push stick. Hope you find it!
Spoke to customer services who stated it should have been in a seperate bag and will replace, just wanted to be sure it wasn't hidden on the device like all the other bits :-)
@@MATTDOESSTUFF2020 Absolutely brilliant! Found it :-D would not have spotted that and even Customer Services didn't say that 🙂
@@matthewwakeling4918 nice glad you found it!
From where we get this
I got this from axminster tools
Good review and just unboxed mine. Too many errrm's though.
Is this table saw from Taiwan good?
I like it. works very well
Palm, you need a new pair of scissors, they've only got one handle ✂️
I know, they were already on their last legs and then i broke them unboxing this saw!
have you ever thought of reading instructions before trying different levers and knobs and doing a review.
I dont do reviews that often, thought id give you my raw first impressions from just opening the box. If i read the instructions first it would maybe defeat the object of an unboxing.
Hench
You know it!
Ahn, ahn, ahn, ahn, ahn, ahn, ahn, ahn,..., ahn, ahn
Did you buy it though
@@MATTDOESSTUFF2020 ahn ahn