@Ali.. You and the PSI crew make DIY's and mods look like so much fun... NOT, when you don't have the lift or right tools, and most importantly a supporting staff.. love it.. 👊🏽
love it i got a 2007 323i and have the same muffler keep getting given shit for it everyone says buy a 335i but different and unique is where i shine look forward to seeing more vids
Yes, it would. Although the muffler is a straight-through, on its own it is often not able to reduce rasp enough. Resonator would surely help. Additionally, decat very often adds rasp as well. If it would have a 300 or 400 cel racing cat and a resonator, I guess it would sound way less raspy and much deeper. However, it would surely get more quiet as well. Personally I prefer a deeper and less raspy sound, over volume, but each to their own, it depends from a personal taste.
See? you have duals exhaust and you want a darn single exhaust went looks super nice.And many ones out there wishing for their cars to be dual exhaust well I hope your cars get the dual you want always.
your 335 content is the best. subbed and liked, your buddies channel is super cool too, something about a korean working on a german car that just adds the right amount of spice. like kimchee. come sam me da. or something like that. 6:03 i have a pair of those safety glasses too.
One of the old school mechainics that I used to work with would weld with his eyes closed when tacking exhaust pipe. I had never seen anyone do that before and it threw me off 😂😂 I was like wtf is happening then I saw his eyes shut while he was welding. 😂
This man is fucking nuts, no mask at all, "its OK he closed his eyes" I hear you say. I used to be like this ,but your eyelids get burned instead. And your face. Badly. Just mad.
🤣😂🤣😂 laying pipe tonight just killed me you look so innocent your too precious for this world dont talk like that lmao Christian is a bad influence on you Ali
I just found your channel. I don’t follow many channels but you guys had me laughing haha. Where in Florida? I have an N55 2011 535i and wanted to do single exit as well.
@@SwapDepot The flange at 0:50 connect to the down pipe. I'm trying to build a single exit also just need to build that y section. Could you provide part numbers for each parts in the video?
Prevents cracking of the exhaust since the motor and transmission move around while driving and it allows you to move exhaust a little bit to make it fit right
Unfortunately it’s not for sale unless there is a lot of interest in the system then I might consider selling 10 to 15 systems at a time to people that are willing to pay
Now just throw a 328i badge on it 😁
👀👀👀
@@SwapDepot dude I can mail you a 318d badge if you want 😂
@@xantor_ i have black f30 316d badge😂
😂
True 😂😂
Nice to finally see a video from the twins into a single exit!
Put a resonator in the middle and it will take all the raspyness out and sound perfect!
@Ali.. You and the PSI crew make DIY's and mods look like so much fun... NOT, when you don't have the lift or right tools, and most importantly a supporting staff.. love it.. 👊🏽
Sometimes it’s fun other times not so much I’m going to be leaning towards doing a lot of the stuff in my garage and such so that ppl can relate more
Finally someone who isn’t afraid to do it👏🏽Best sounding 335i
Jesss
I did it to mine with just a resonator and hands down best exhaust sound
I had one on my f30 bruh. Shit sounded amazing
yall got me tempted to do it on my n55
Take the plunge and standout
Now this is quality rice 🔥🔥
😂🤟
Fried rice 🍚 😂 love it!
That raspy fart can 🤢🤮. Other than that it's a nice setup.
Rice rice baby
How can yall say this is rice?😂 dual or quad exhaust on bmw’s straight 6 sounds rice!! No straight engine should have dual or quad exhaust! Period.
love it i got a 2007 323i and have the same muffler keep getting given shit for it everyone says buy a 335i but different and unique is where i shine look forward to seeing more vids
I'm getting ready to do the equivalent with 3" on my e92 335i, love it!
Did you do it ? How it sounds?
The guy holding the camara has a voice of your bad decisions telling you do it just one more shot. Hella deep voice haha
i look so long for a n54 single exit thank you
Do you think adding a resonator would help with the rasp or would it not make much of a difference because it already has a muffler?
yeah probably
Yes, it would. Although the muffler is a straight-through, on its own it is often not able to reduce rasp enough. Resonator would surely help. Additionally, decat very often adds rasp as well. If it would have a 300 or 400 cel racing cat and a resonator, I guess it would sound way less raspy and much deeper. However, it would surely get more quiet as well. Personally I prefer a deeper and less raspy sound, over volume, but each to their own, it depends from a personal taste.
Thinking of going with a single canister myself. A Vibrant, HKS or 1320. It looks and sounds good imo.
See? you have duals exhaust and you want a darn single exhaust went looks super nice.And many ones out there wishing for their cars to be dual exhaust well I hope your cars get the dual you want always.
Greatest looking exhaust👀 I’m inspired🔥
your 335 content is the best. subbed and liked, your buddies channel is super cool too, something about a korean working on a german car that just adds the right amount of spice. like kimchee. come sam me da. or something like that. 6:03 i have a pair of those safety glasses too.
For some reason my gut felt like that this car never saw those cats ever again..
Jesss
Great video guys! I enjoy it, funny and informative. Kudos!
Finally more good sounding singles
nick throwin it back
Awesome exhaust but sadly here in Germany this is highly illegal :(
Fresse
Looks sick bro!
Jesss
These guys are awesome 👍
The guy welding definitely got arc eye that night if ur tacking Atleast use safety glasses if nothing else
Jesss def chopping my VRSF and doing this
That’s definitely the easiest route and should be fairly simple
Damm that sounds so good ❤
One of the old school mechainics that I used to work with would weld with his eyes closed when tacking exhaust pipe. I had never seen anyone do that before and it threw me off 😂😂 I was like wtf is happening then I saw his eyes shut while he was welding. 😂
Thanks again Mr Jess! When's the FMIC install? :P
Doing all of that together with other mods
@@SwapDepot aight, can't wait!
The guy holding the camera sounds like Sam Elliott
That fade
Vibrant gear is nice.
For sure!!!
Sounds so good 👍!
Jesss
Hell jess bro that's what I'm talking about
Jesss
Which muffler did you get for this install. Im doing my 3.5" next week and liked that muffler
vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=9247be5b0f85dc3167d21f74086aefd0
Mans is brave welding without that mask, it’s not fun when you accidentally burn your eyes
Or blind yourself
@@fredfrederickson that’s if you stare at it
This man is fucking nuts, no mask at all, "its OK he closed his eyes" I hear you say.
I used to be like this ,but your eyelids get burned instead. And your face. Badly. Just mad.
I might do that to mine!
What’s your wheel / fitment setup? Love how meaty your tires look.
Check out my other videos I talk about everything
I’ve been thinking about getting something like this for my e92 335 then buying a 328 bumper and badges lmao
I wanna see more of that e60 M5 !!!!
JEESSSSS!!!!!!
🤣😂🤣😂 laying pipe tonight just killed me you look so innocent your too precious for this world dont talk like that lmao Christian is a bad influence on you Ali
now it needs a bottom mount single turbo kit
Jeeesss ! 💪🔥🇵🇷
Hm he said or twins he should do mmp1k kit those turbos are soo nice
Heard mixed opinions on those, not sure if I wanna spend 3k on a twin setup 🤷♂️
@@SwapDepot dont blame you. Its nearly single turbo kit money. Especially if you can fab up the exhaust manifold yourselves.
Yea that’s why I don’t wanna spend the money, plus I already have something, video will be posted soon
nice exhaust i woulda did the same good taste i like the sound gratz.
Everybody gonna start doing this just watch
We shall see 😂
Definitely not lmao
Nice
Yo that looks dope I’m gonna go this to my E90 soon you think the extra width pipe is worth it? I was gonna run 3” exhaust pipe
Definitely worth it and sounds better
@@SwapDepot bet appreciate it 👌🏽
What would the average cost to get a job like this done ??
You should open your own shop.
nice
Did you cut and reuse the flanges that connect to the down pipes? Or did you get that merger from somewhere?
Had a fabricator make the y section
I wanna do this
Hey cool I like that sound how I can get one for my 335I coupe?
You would have to build it, would take it to a exhaust shop and see what they can do
Is that all mild steel? Assuming cus of the mig welder
Mig welded because it was easier to do at the time
Sounds great.. but you should have tig welded it.. and a better fit to bumper :)
I’m ditching that stock bumper anyways
Jesss!
Which vibrant muffler is that?? Also stock downpipes or catless? pls it sound soo good I need to know lol
vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=9247be5b0f85dc3167d21f74086aefd0
VRSF downpipes
@@SwapDepot thanks!
I just found your channel. I don’t follow many channels but you guys had me laughing haha.
Where in Florida? I have an N55 2011 535i and wanted to do single exit as well.
Orlando area
Is that Y pipe a custom piece or purchased?
Custom
What in the Honda have you done to a bmw
🤷♂️ trying something different
Only dude in the world who wants his BMW to look like a Subaru 🤣🤣🤣🤣
Jesssss man
Jess,say it is not SO !
Can you do a video on the e30 wagon?
Maaaaaaybe!
This shop really looks like LZ’s old shop
is that a vibrant performance muffler??
Yes
I want this on my e82
Where did you get the 2-1 collector?
how did you source the collector from the downpipes to single 3" ? was this custom made also?
Custom made
@@SwapDepot any chance the fabricator wants to make another? $$
I have a collector that would work
@@SwapDepot I’m interested….
Can I get his information. Because I really like the sound of your exhaust and I’m trying to get the same one. I also preferred single than dual
Looking to get a single exit on my single turbo e90
Do you have links to all the parts used?
Specifically that 2.5” to 3.5” merge pipe
muffler link please?
They definitely watched South Park
Where did you get the flange to build the y piece?
Are you talking about the flanges that connect to the downpipes or the Y section?
@@SwapDepot The flange at 0:50 connect to the down pipe. I'm trying to build a single exit also just need to build that y section. Could you provide part numbers for each parts in the video?
It’s custom made, best bet would be to get the VRSF exhaust and modify the rear section
What are the benefits of a flex pipe ?
Prevents cracking of the exhaust since the motor and transmission move around while driving and it allows you to move exhaust a little bit to make it fit right
Has this been done on a 320d? 😂
I would rather do that than another 335 dual conversion...
Did the exhaust make any more power?
Little bit 🤷♂️ can’t tell since the car has bad turbos
It will you have better flow through the exhaust rather than the true dual coming out the back. Also a lot lighter weight. You get a 2 for one special
Yea for sure!
Imma do this then put 323i badge on it (canada spec 2.5L)
Where could i buy the long mid pipes you have?
Vibrant performance
why does it sound like a 328i now? these normally sound like 2j's
What are you talking about, have ever heard a 328 that’s straight piped??? Twin turbo n54s don’t sound anything like a 2j btw
Any power gain
I’m sure there is some but I couldn’t really tell
Where can I find the complete set up?
Its custom made, nowhere
Fart can noises ftw
link for the tip
Question what rims are those and size ?? Lol
Still waiting on the video for the twins 😩 jess
Coming soon!
Downpippe?
where did you get the muffler?
Amazon
where did you get that Y piece
Custom made
he litarly made it a supra
Idk why but this sounds like my old m52 lol
5:55 Where Do I Get That Part Or What Do I Need To Buy To Get It Custom Made
Y pipe and 2 flanges for the downpipe to make a custom piece
@@SwapDepot Should Make Your Own Single Exit Exhausts For N54 There Isnt Any 👀👀
Bro seriously where is your shop at
Orlando FL
where did yall get the Y pipe??
Had it made out of scrap 335 exhaust I had laying around
Jesss?
Jesss
I really like it but i hate the farty raspy sound up top
After breaking the muffler seems to have little to none drone or rasp
where can I get that y pipe
Custom piece
I found out welding in socks and slides are a bad idea lol
link for the muffler?
vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=38b65167f234a2aac121c68f8560c1d2
where can i buy this dope!!
Unfortunately it’s not for sale unless there is a lot of interest in the system then I might consider selling 10 to 15 systems at a time to people that are willing to pay
How much would this cost? Pretty interested
With fab and parts around 1500$ and that’s tig welded not mig
If you do decide on selling, u can count me in.. but I think shipping to Guam 🇬🇺 would cost alot.😭
Yea the shipping would definitely be a lot
would it possible for m5?
Which M5?
Which M5? E39,E60,F10,F90?
It can be fitted on a 135i?
Yea probably just slight adjustment
@@SwapDepot can you link the parts that you buy online
vibrantperformance.com/catalog/product_info.php?cPath=1527_1032_1535_1052&products_id=1166&osCsid=2fdbcc8eab57420f80fd32881417440c
And all the piping can be found on their website
been wanted this for my e82 n54 too
Sounds like some juicy farts after chipotle
Mmmm nice 👍 😂