Thoughts on new camera quality? Also make sure to check out CAR VERTICAL and use my code 'TRH' to save 10%: www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
I have only just started working on my own cars ( I have been into cars all my life just never had confidence or the right car to start on ) I have a mk6 gti and just last week did the following Service all fluids and replace all filters Put a cold air intake on from Intergrated engineering High pressure fuel pump and cam follower upgraded to Audi R8 plugs and coils replaced coolant expansion tank as old one cracked Bilstein B4 shock absorbers all around including new dust boots, mounts and bump stops Upgraded to powerstop evolution sport Z23 pads and EBC slotted rotors replaced anti roll bar with one from a mk6 R and do sway bar end links and bushes for sway bar I sounds like a lot but for someone with little to no experience I must say I thoroughly enjoyed working on the car, the HPFP was the easiest thing I have done.
Video quality is much better with the new camera👌🏽I think the OEM wheels in the original finish would look nicer than the RSRs, but for an all black wheel they definitely look really good.
Good job! If u want even less unsprung weight i’d recommend 2 piece rotors and Porsche Macan calipers. That’s 4 kgs or nearly 10 pounds less unsprung weight 💪
Autoglym Tar Remover will dissolve of the glue residue on the front bumper. DAB on, let it dwell for a few mins then wipe off. Might take one or two applications depending how thick the glue is. Wash with hot soapy water afterwards. 👍
That gap between the bumper and wing is due to the bumper being pulled and it pulls the metal on the wing. You have to straighten the metal on wing for it to start sitting right. Loving the builds.!!
Tar and glue will remove that tape residue with ease from the bumper. Bit of a polish and it’ll be like new. The broken tab on the bumper corner is an easy fix as well. 👍🏻
Coming together nicely mate. Do prefer the Cadiz rims, why would they respray them that weird colour? Didn't notice it was 4k, your videos are always crystal clear.
Just found your channel as I’m starting to mod my Scirocco R - actually very helpful seeing it all apart, given me some confidence to start my first mods👍🏻
Completely agree about the scirocco looks, I think it will go down as one of the best looking cars of all time. Not a huge fan of the wheels, but glad it’s one whole car at least!
Another awsome video! I'm a scirocco fan and so it's great to see you restoring one 🫡 those alloys though I'm not a fan of 🤔 I would restore the original ones back to silver but I know its each to their own 🙏🏼 keep up the good work!
You’re doing a brilliant job car is looking awesome. They are a lovely looking car Good luck with the builds looking forward to the next episode Thank you
Video looks better, but it could really use some stabilization for the handheld shots the video vibrating around can be quite jarring at times. Might be able to stabilize it in post by punching in a bit since you're shooting in 4k anyways, or use one of those handheld gimbles.
Great save, I wonder if that car originally lived in Scotland or somewhere by the sea as there's a surprising amount of surface rust on some of the suspension compontents for a 2015 car.
The footage is great bro 😎 I’m in the market for something as well and it was the first thing that caught my eye 👁️ lol, what was you using before and what did you upgrade too??
Great video as always. But new wheels look too small, think tyres need to go up 5 on profile. I’m not a Cadiz fan, so aftermarket’s for me. But maybe Cadiz look good refurbed
I know my Ed35 is more rare but I’m really wishing I got a facelift Rocco 😢 been looking everywhere for the dash gauges to see how they look on my car.
Does anyone know what website he used to see all the spareparts laid out like that? Haven't found anything useful yet, while trying to repair a Scirocco R myself.
Camera looks pretty solid, even in 1080p, also seems like we're getting close to driving this thing! To be fully honest, the wheels aren't quite my favourite.
Enjoyed the video cool job.. look forward to more updates on the sirrocco, as I've just bought a black R line sirrocco after long hunt.all the lines a proper coupe should have😁👍🏻
It's great seeing this come together, fabulous work Hamza! I reckon go a new bumper, though easy to say when I'm not spending the money! ps. I'm not a fan of the Cadiz wheels, much prefer the pre-facelift Talladegas. I've heard that the wheels on the Sciroccos have a 10mm wider offset than the Golf 6R stock wheels.
Footage is looking crispy now in 4K!! What camera do you film with? I've stepped up to a Sony ZV e10, and loving it! Oh and nice custom RS decal on the Caddy bonnet!😂
Which camera are you using now? I'm guessing you're filming straight handheld for the most part. If this is the case then I would say maybe use the built in stabilisation options on the more active modes to negate as much of the camera shake as possible. The quality is awesome.
Camera quality is a lot better mate do you use a gimbal? If not it may help with when your using it in selfie mode and you turn or rotate the camera but other than the transitions new camera is pucker mate! Love these build inspiring me to try it mate ain't even got a licence yet! 🤣🤣🤣
A was about to say that headlights prob broke when a seen the lack of packaging in the box 🙈hope u get it sorted and get a replacement 🙏loving the content 👌
i've seen a rocco with the RSR'S but spacers were fitted and they were a brighter finish, roccos eat up black wheels without being lowered...but then you lose DCC
Can't say I'm a fan of the wheels. Love the BBS style but these are move convex shaped than the original flatter look or even concave which to me makes them look cheap. Love the series so far though and that 4k footage will look great in years to come when someone is restoring one of these 50 years later haha
Thoughts on new camera quality? Also make sure to check out CAR VERTICAL and use my code 'TRH' to save 10%: www.carvertical.com/gb/landing/v3?b=1e4c9523&a=Hamza&voucher=trh
Quality is on point 👌
Looks great!, spot on.
Quality is good, but you need to turn your stabilization on or up. Got a bit of motion sickness during your vlog style sections.
Loving the change, it looks incredible
Definitely looks like a car now 💯 but standard wheels look much better.
Wayyy better
In your opinion?
I think it's the convex shape to them. Original BBS are more flat but on these the spokes bend inwards towards the arch
I think the genuine wheels look better if I'm honest. They just need refurbishing back to a diamond cut finish 🔥
Love these builds! Would really love to see the original wheels being refurbished and put back on the car...
Thanks! Yeah I’ll get them done
Can’t believe the headlights are just thrown in the box like that no packing foam or anything
Yeah they rely on cling-film to hold them in place lol
Yeah that’s mad. I got some cheap Touran headlights for my Caddy and they wedged between some thick foam pads, top and bottom.
@@TRHamzait's possible to have the website for the headlight ?
@@mathairsoft8337He bought them from TPS
@@mathairsoft8337TPS dont sell to public anymore. You need to have trade account basically
I have only just started working on my own cars ( I have been into cars all my life just never had confidence or the right car to start on ) I have a mk6 gti and just last week did the following
Service all fluids and replace all filters
Put a cold air intake on from Intergrated engineering
High pressure fuel pump and cam follower
upgraded to Audi R8 plugs and coils
replaced coolant expansion tank as old one cracked
Bilstein B4 shock absorbers all around including new dust boots, mounts and bump stops
Upgraded to powerstop evolution sport Z23 pads and EBC slotted rotors
replaced anti roll bar with one from a mk6 R and do sway bar end links and bushes for sway bar
I sounds like a lot but for someone with little to no experience I must say I thoroughly enjoyed working on the car, the HPFP was the easiest thing I have done.
Not a fan of the wheels hamza, cars looking good! Be lovely with paint when it's done 👌
Agree wheels don’t work at all for me
Might be better when it’s dropped down though
Need a size bigger, or car lowered a little. Then they would look banging!
Nice work Hamza! Something special about the Scirocco!
Video quality is much better with the new camera👌🏽I think the OEM wheels in the original finish would look nicer than the RSRs, but for an all black wheel they definitely look really good.
Good job!
If u want even less unsprung weight i’d recommend 2 piece rotors and Porsche Macan calipers. That’s 4 kgs or nearly 10 pounds less unsprung weight 💪
Autoglym Tar Remover will dissolve of the glue residue on the front bumper. DAB on, let it dwell for a few mins then wipe off. Might take one or two applications depending how thick the glue is. Wash with hot soapy water afterwards. 👍
That gap between the bumper and wing is due to the bumper being pulled and it pulls the metal on the wing. You have to straighten the metal on wing for it to start sitting right.
Loving the builds.!!
Tar and glue will remove that tape residue with ease from the bumper. Bit of a polish and it’ll be like new. The broken tab on the bumper corner is an easy fix as well. 👍🏻
Coming together nicely mate. Do prefer the Cadiz rims, why would they respray them that weird colour? Didn't notice it was 4k, your videos are always crystal clear.
It’s all coming together I think the original wheels fit the car better and with the blue calipers will look perfect
Always gotta show love for my brother. Respect the graft.
Love the production quality. Easy to be overlooked when the delivery of dialogue is great to 👍🏻
I was looking for part two and then bam landed in the feed - nice let’s see the journey
Remarkable improvement in the details and overall video clarity mate, quality upgrade I'd say 👌🏻
Just found your channel as I’m starting to mod my Scirocco R - actually very helpful seeing it all apart, given me some confidence to start my first mods👍🏻
Great video. 4k video looks better then the old stuff. keep up the great work
You done very well getting that frontend part for £79.99 😮 👌🏽 absolute bargain
Completely agree about the scirocco looks, I think it will go down as one of the best looking cars of all time. Not a huge fan of the wheels, but glad it’s one whole car at least!
Another awsome video! I'm a scirocco fan and so it's great to see you restoring one 🫡 those alloys though I'm not a fan of 🤔 I would restore the original ones back to silver but I know its each to their own 🙏🏼 keep up the good work!
Camera work and video quality is spectacular! Scirocco R looks sweet! Great job Hamza! 👍
You’re doing a brilliant job car is looking awesome. They are a lovely looking car
Good luck with the builds looking forward to the next episode
Thank you
Spacers and lowering required. Looks sick!
You will soon be a certified VW tech Hamza at this rate!
Big up from south Africa bro , currently saving up for a vortex xl your channel has been a huge inspiration.
It's looking completely different from when I first seen. It's getting there bro👌🏽
Video looks better, but it could really use some stabilization for the handheld shots the video vibrating around can be quite jarring at times. Might be able to stabilize it in post by punching in a bit since you're shooting in 4k anyways, or use one of those handheld gimbles.
Great save, I wonder if that car originally lived in Scotland or somewhere by the sea as there's a surprising amount of surface rust on some of the suspension compontents for a 2015 car.
The footage is great bro 😎 I’m in the market for something as well and it was the first thing that caught my eye 👁️ lol, what was you using before and what did you upgrade too??
Hamza always coming through with a video when I'm scrolling youtube
Haha good timing!
Good job man, nice rebuild.
Please use the original wheels they look so much better!
Now we have car just about, been waiting for this, lots of support from South Africa brother 💪💥🔥👌
Great upload bro. Camera work on point throughout 👍
Not far off the 200k now 💪
Good job, I enjoy watching your videos on VAG Group keep it up, calipers black again please
Love how fluid your videos are keep it up
After hearing the message switched to 4K and indeed far more details.
The scirocco looks so much better and the artwork on the caddy rs bonnet looks good😂
Great video as always. But new wheels look too small, think tyres need to go up 5 on profile. I’m not a Cadiz fan, so aftermarket’s for me. But maybe Cadiz look good refurbed
I know my Ed35 is more rare but I’m really wishing I got a facelift Rocco 😢 been looking everywhere for the dash gauges to see how they look on my car.
She’s looking much healthier now! 😎
Does anyone know what website he used to see all the spareparts laid out like that? Haven't found anything useful yet, while trying to repair a Scirocco R myself.
Using this video as a guide as my Scirocco needs the same parts replaced & copart delivered the car with a bunch of screws in the boot 🤣
I was refreshing my subscription and this popped up 💪🏽😭
Loving the projects! Cadiz wheels for me if you can get them refurbished! 4k also looks 👌🏻
4k looks class. Didn't fancy an intercooler upgrade while you were there?
Camera looks pretty solid, even in 1080p, also seems like we're getting close to driving this thing! To be fully honest, the wheels aren't quite my favourite.
Enjoyed the video cool job.. look forward to more updates on the sirrocco, as I've just bought a black R line sirrocco after long hunt.all the lines a proper coupe should have😁👍🏻
Great job TR, an easy click each time, love it, 😀🇮🇪
Thank you mate 👌🏼
😃Great content, loving the builds, teaching me stuff as well. The camera upgrade is a must, looks clean, add to the content.
It's great seeing this come together, fabulous work Hamza! I reckon go a new bumper, though easy to say when I'm not spending the money! ps. I'm not a fan of the Cadiz wheels, much prefer the pre-facelift Talladegas. I've heard that the wheels on the Sciroccos have a 10mm wider offset than the Golf 6R stock wheels.
Footage is looking crispy now in 4K!! What camera do you film with? I've stepped up to a Sony ZV e10, and loving it!
Oh and nice custom RS decal on the Caddy bonnet!😂
I'd like to see you going back to your old format with driving other cars, to me it was much more fun.
Cam quality is brilliant but it seems quite a bit more shaken. Keep smashing the content. 👍🏻👍🏻👍🏻
Like the video. Not a lover of the Cadiz Alloys but with refurbishment they would look better than the ones you fitted
Love the 4k Mr. Hamza and yes, was wondering about the VR6 & RS Caddy😄👌🏻🇿🇦💪🏻
Brother! You gotta put wheel spacers
Loving it mate. Cadiz wheels are the ones..
7:19 I would have just fibreglass repaired them, but if you got the cash to spend why not replace them.
Which camera are you using now? I'm guessing you're filming straight handheld for the most part. If this is the case then I would say maybe use the built in stabilisation options on the more active modes to negate as much of the camera shake as possible. The quality is awesome.
Agreed... too much wobbly camera.
Scirocco be looking great Hamza
Great content and the new camera adds clarity...
Not sure about the new wheels to be honest much prefer the original ones refurbished
good to see you doing well brother💪
Im waitn since few days.. finally its updated! Thanks Hamza❤️
Bigger wheels definitely bro maybe diamond cut refurb the original ones again 👊🏽 but aside to that wicked content always bro MashaAllah
Just come across this vid, I've got the exact same car (am not sure what that engine cover is mate)
Camera quality is a lot better mate do you use a gimbal? If not it may help with when your using it in selfie mode and you turn or rotate the camera but other than the transitions new camera is pucker mate! Love these build inspiring me to try it mate ain't even got a licence yet! 🤣🤣🤣
Great progress…. Loving the 4K 👌🏻
A was about to say that headlights prob broke when a seen the lack of packaging in the box 🙈hope u get it sorted and get a replacement 🙏loving the content 👌
Loving this content bro, great work 👍🤙
i've seen a rocco with the RSR'S but spacers were fitted and they were a brighter finish, roccos eat up black wheels without being lowered...but then you lose DCC
The 4k looks crisp bro
Enjoying the content. Wheels arent for me personally.
Stock wheels are much better, just refurbish it and call it a day:) can't wait till it's finished!
Hey we almost at 200k congrats in advance ❤️
Haven’t even watched the whole video, already know it’s gonna be a good one 🤣🙏
Standard wheels ftw mate
Great picture quality but there's something weird with image stability / frame rate.
I'm enjoying the content 👍🏻
Masha’allah my bro always good to see your vids ☝️
Nice job mate wheels look real good ...
4k camera seems a bit shakier on hand held stuff. Might be worth looking at a gimble?
Sorry but its a no from me for the wheels
Love those wheels 🤌🏽👌🏽
Loving the content bro! Mat Armstrong number 2 soon! 💪
Bro pls keep blessing us with your creativity 🙏💯🔥
Standard wheels after a diamond cut refurbishment would be much better looking on the car 👍👍
Camera looks great man!
Hamza the 4K looks good but the stabilization for the face cam needs to be a little smoother.
Another epic video brother thank you for your content as always godbless 🙏
camera looks great man!
Where abouts did you buy the grill from? 😊
New camera looking good mate add bit more light and it will pop better :)
Loving the 4K upload🙏🏽🙏🏽!!
Thank you! Been long overdue haha
Can't say I'm a fan of the wheels. Love the BBS style but these are move convex shaped than the original flatter look or even concave which to me makes them look cheap. Love the series so far though and that 4k footage will look great in years to come when someone is restoring one of these 50 years later haha
Not a big fan of the wheels but reckon once the cars been lowered they may look better, overall great video as always 💪🏻👏
Another good video. Great achievement. But, not sure about those wheels. I'd refurb the originals.
Scirocco looking good bro 💯 🔥