I have a few questions before I decide to bypass my mac If it dies do I have to worry about rebypass? Can the mac randomly lock if I didn’t update or etc?
Sometimes you need to re-bypass when the battery dies sometimes you don’t, it won’t just randomly lock it will only lock if you power on/off using the power button so don’t use that 👍
Just tried this tonight and it works just as you described. Nice one! Are you sure that a "Transfer or Reset" will bring back the Activation Lock? I haven't tried it yet, but just wondered.
On my mac mini i bypassed if i unplugged it, even after doing a shutdown, it would need rebypassing. In guessing from now on once i do the bypass it will no longer need to be rebypassed, whether i hard reset or loose power. Will i be able to update macos (ie 14.4) without re bypassing though?
Does this new update completely delete iCloud? I bought it recently and the bypass was successful, but when I turn it on again by long pressing the power button, I continue to get the Activation locked error. My device is MacBook Pro 2019 16" İnch installed version: sonoma 14.4
It’s an untethered bypass but you don’t need to worry about the hard reboot anymore as this method fixes it and if you have already done the bypass using checkm8 then your good to go 👍
The OTA is blocked 🚫 from updating to get to the latest Sonoma you need to start from the beginning that’s why it’s important to use command option + R because it shows Sonoma in the Mac OS recovery if you use command + R it will show you the default Mac 💻 OS
Dear, I am having problem with Macbook Air 2018 Activation Lock bypass. I am getting error on Stage 2 failed. Please reconnect device into DFU mode. I tried multiple times even with different Macbooks as but still same
The OTA update is blocked 🚫 on checkm8 so you can’t update you can get your iCloud locked Mac on sequoia and here is how I uploaded this 2 days ago ⬇️ th-cam.com/video/cvCfHW4Q_-0/w-d-xo.htmlsi=rSUusPntBMbxtAj6
Ok I’m assuming you erased the disk utility before proceeding with the installation of Mac OS Sonoma ok there is an easy fix to your problem, you need to do a DFU restore of the target 🎯 mac = the iCloud locked 1 using Apple Configurator 2 what that does is it updates the bridge OS once you have done that start from the beginning and proceed that will fix the installation error 👍
Once your in the device and the bypass is complete like I said in my video I would turn off automatic updates as your already on Sonoma @ that stage anyway.
I get to stage 2 during the dfu but it gives me an error wont go past this stage. Tried different sync cables and verified the target macbook with apple config. Any suggestion
It won’t be stuck on apple logo it will give you an error code because internet 🛜 recovery fails sometimes like I said in the video if that happens do the bypass again and boot into Mac OS recovery make sure you use command option + R so it will show Sonoma
Can I upgrade from Catalina? I couldn't restore Sonoma with my 2019 MacBook Air, I kept getting an error after it gets to 14 mins before restart. So I did with Catalina and everything works fine.
I think the OTA update is blocked you can give it a try, here’s the thing when getting persistent error codes on internet 🛜 recovery there’s an easy fix to it all you need to do is refresh the PRAM so @ the beginning press power command option P and R until the spinning globe shows that’s how you fix internet recovery errors.
I honestly would just like to know how this works? This is obviously using the issue found in the T2 chips that allows you to Jailbreak them but how does the machine not get iCloud locked again when connected to a WiFi network? The serial number reports the machine as iCloud locked so surely when it connects back up to Apple's servers it does it all over again?!
It gets locked again if you erase all content and settings because it’s a bypass which means its software related, yes the SN does indeed confirm that (FMM) FIND MY MAC is indeed turned on but just like an iPhone or iPad that is bypassed it’s done in such a professional manner the techniques are remarkable it enables the devices to be fully activated so they can be used as a device that is basically purchased from a shop interesting right well that’s all you’re getting from me, you want more do some research 🔬 👋🏻
I've just done it on my mac t2 macOS Ventura, is it the same thing? Can i still shut down my MacBook normally now?, because i did do the bypass with checkm8 at the end of the bypass message they said "attention, do not make force restart, else you'll go through the bypass again"
No the untethered has been patched only the tethered is available NO force shutdown look I done a video on it the other day on sequoia as well ⬇️ th-cam.com/video/cvCfHW4Q_-0/w-d-xo.htmlsi=vwgPWTnxFKOMnjeq
@@FOR-THE-RECORD-ICLOUD-HELPER aight thank u mate, there's just a small problem I'm facing, after the bypass and the internet recovery, when i finish installing MacOs Ventura, it always tell me that there was an error while installing the MacOs, and i should redo it again, I've done it three time for now and it's always giving me the same thing... Any ideas?
You need to restore the mac 💻 by using Apple Configurator straight forward process that’s Y your having this trouble because restoring the T2 MacBooks updates the bridge OS as well it’s also mentioned in my recent video I sent you 👍
Hey i have a 2019 mac pro on Mojave the seller told me it is bypassed but i can turn it off and on from the button reser nvram so if i update the macos will it relock ? thanks for your time
When pressing cmd + opt + R, I only get into the macOS Ventura recovery and the macOS Ventura installations fails because of an error. I have a MacBook Pro 13“ 2020 and it should support macOS Sonoma. Any idea what I could do?
Yes I have a fix for that so basically you’re Mac 💻 is running an old bridge OS and you need to update it to do that you need to restore the locked Mac 💻 using Apple Configurator 2 on the host Mac 💻 after the restore is complete do the bypass use command option +R and it will show Sonoma in the Mac OS recovery if you don’t know how to use the restore here’s a video a step by step guide for you ⬇️ Remember do not revive use the restore ok 👍 th-cam.com/video/UaVgBP4gJsU/w-d-xo.htmlsi=z8hbTDpuHmwuyPA0
hello i buyed a 2018 macbook pro with iCloud bypass t2 with Mojave os installed on it can I update my os to Sonoma or a further version without loosing the bypass ?
When it was untethered you could but apple patched it so as it’s tethered I’m not sure you may need to start from the beginning but yes give it a try 👍
The untethered version is patched they have now released the tethered version please read this below ⬇️ also it’s cheaper 59.99 th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=gKJX8EMs8QFLbY23
I really am having an issue. i even have proof the mac is mine but i have an a2141 and it just continues to go in and out of dfu not completing the checkm8 process. my other mac is ancient usb only, my newer 13 pro im waiting on a new ribbon for the notorious keyboard/trackpad death. i do have an imac but it has a thunder port not c.. i have a thunder to usb c cord coming today. any ideas? is the imac not fast enough? it screams.. but anyway im so frustrated and start school the 15th and i need this macbook pro working.. i bought it let my ex use it and she said she'd give me the macbook back to let her share our dog.. she gets my 2,000 dog and then locks me out of the mac.. thats the least of what she did.. cost me 15 years and a business i built making 200k... lawyers are at work. but im screwed right now.. PLEase give me some advice
Thank you my friend I really appreciate that and yes just to confirm model A2141 is indeed compatible for iCloud bypass on T2 MacBooks 💻 the Mac 💻 may need a update on the bridge OS which would indeed require a another MacBook to use as a host MacBook 💻 using Apple Configurator 2
hello, I was unable to bypass activation on a macbook air 2019 a1932, when I get to installing mac os sonoma 14 minutes before loading and registering the macbook goes out and restarts on the activation window, what should I do if I went around 5 times and nothing has changed?
Ok when it restarts it’s still installing the Mac OS so when you go through the setup then and reach the activation lock then connect to the other Mac do the bypass and just press the power button on the locked Mac 💻 done 👍
I bypassed it but my Mac is on macOS mojave from like 2018. Is there a way of updating it without having to do checkm8 again and if not then if I connect my MacBook to another one and restore it to latest update and then redo check mate will it work
You can try to update it OTA if it doesn’t work then yes re-bypass with checkm8 you can do that as many times as you want as your device is now added to there database 👍
The Mac bypass hasn’t been patched it’s just gone from untethered to tethered read this from checkm8 ⬇️ th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=0ZD3klsxDFhJVNkz
Hi! I used your application after purchase and I've got this error messages -2004F and -3401F. After use the application at first time, now I obtain this error: cannot use thunderbolt accessory connect accessory using a thunderbolt capable cable
That’s an easy fix ignore the thunder bolt accessory when you’re Mac 💻 goes into internet recovery mode you may get that error a few times but eventually it will successfully enter into the Mac OS recovery make sure you use command option + R so Mac OS Sonoma will show try to get it done today before Mac OS sequoia is released because it will patch it you got this 👍
Hello, I have a iMac 5k 2020 I paid for the service and after the bypass step the iMac turns on by it self with a question mark folder and the Checkm8 software shows that is successfully bypassed.
When the bypass says successful on the target mac which in your case is an iMac 🖥️ using the keyboard press power command option + R it will go to the Mac OS recovery and install from there as I show you in the video 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I already installed the Mac OS Sonoma and now I have an issue with the audio, it has NO SOUND output (except for start-up chime) I tried with Mac OS Monterrey also and still no sound. Do you think guys this issue is related with the Bypass?
That’s not related to the bypass the bypass is software related we’re as with sound audio could be the sound card as if you can hear the chime the speakers 🔊 are working fine
friend asks me a question, I performed the bypass on a 2019 MacBook Pro, I tried connecting with: Command + Option + R, and only the Monterey version comes, but it gives an error during installation, in short, I can only install the Mojave version, like Can I upgrade to Sonoma?
The thing is Like I explained in the video it’s really important to use command option + R so that Sonoma will show so that you can install from the Mac 💻 OS recovery as if you use command + R it will go to the default being Mojave or Catalina now if you install from the default once in the Mac you cannot update it as the OTA is blocked 🚫 that’s Y you need to start from Sonoma, what I find strange is any T2 MacBook 💻 2018-2020 using command options + R will go to Sonoma but in this case your saying you’re friend has used command option + R on a 2019 and it’s only going to Monterey professionally speaking I’ve never heard of that happen Not on a T2 are you sure that your friend didn’t just use command + R and that’s why it’s gone to Monterey because that’s the only thing that makes sense. Maybe 🤔 you’re friend needs to update the bridge OS so that Sonoma will show as it’s important you know 👍
yes you can do it. but during the process, when the MacBook reboots, you need to do a bypass and give the command to boot from the disk, and not from Internet recovery. If I apologize for any misunderstanding, I use Google translator from Russian
@@FOR-THE-RECORD-ICLOUD-HELPER I'm the one doing the bypass, when I turn it on by holding: Option + Command + R, it goes to Monterey, but it always gives an error with 1 minute left, when I turn it on by holding Command + R it goes to Mojave and works normally... I think it was Luckily, I've done everything and nothing works.
I see have you restored that MacBook 💻 using Apple Configurator 2 and done a DFU restore on it as I believe the bridge OS needs updating it will work on Sonoma but it’s a hard reboot = a tethered bypass please read the link 🔗 I sent above ⬆️ and thanks for your time.
hey @FOR-THE-RECORD-ICLOUD-HELPER I have used checkm8 succesfully but it is not untethered. it loses the jailbreak often, and easy with a hard reset. How do you make it untethered?
The fully untethered was patched a few weeks ago, that’s why the price has gone down here’s the latest post ✉️ from checkm8 regarding the T2 MacBook 💻 IC locked 👍⬇️ th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=MpZMRK0iKZDevyFs
Yes when you connect it in DFU mode open checkm8 and it will say the number for example 8.1/8.3/8.5 but the servers are still down I will let you know when there up and running.
@@FOR-THE-RECORD-ICLOUD-HELPER thank you! I also have a 2021 m1 MacBook I know they don’t have t2 but I am wondering if you believe there will be a method to unlock those in a similar fashion. Unfortunately not MDM.
My 2019 MacBook pro has been bypassed but it could not install MacOS as it showed “cannot install MacOS try again”. I have done trough bypass process several times but it still show the same after I waited it install MacOS for 2 hrs. Do you have any recommendation?
@@FOR-THE-RECORD-ICLOUD-HELPER Yes right, it was installed Sonoma on first time. After that, it always show Ventura for me but the yellow triangle still appear at the last minute of installation again.
@@FOR-THE-RECORD-ICLOUD-HELPER yes, I do but it shows Ventura by the way can I try to use time machine backup from other mac or install MacOS via flash drive?
The MacBook should already be on the latest Sonoma like I showed in the video command option + R in some cases OTA updates are blocked 🚫 so you cannot update from say Mojave or Catalina to Sonoma if you have done command + R and your on and older Mac 💻 OS I would advise you do the bypass again using command option + R thanks 👍
Hi, I have a problem. I paid for the application to be able to bypass iCloud, but it doesn't work either, I click on "start" and the laptop comes out of DFU mode, what could I do in this case?
That’s not a good sign when you’re Mac 💻 jumps out of DFU while performing the bypass because the bypass will fail, you may need to update to the latest bridge OS by restoring through Apple Configurator and hopefully that will fix it but if it’s a hardware issue then it won’t, there’s loads of videos on TH-cam that show you how to restore a T2 Mac 💻 using Apple Configurator good luck 🤞
@FOR-THE-RECORD-ICLOUD-HELPER hello, I apologize for the trouble once again, look, in the end I managed to bypass it but I still have a problem... I deleted the partition nicely, I install mac-os and at the end the mac stops, then it starts again and at the end I have to configure the language and it takes me to activate the mac, it seems that it doesn't want to skip the activation part, can you help me in this case? (I tried 3 times and nothing)
Yes when it gets to the activation lock connect it to checkm8 and bypass it again once checkm8 says successful then just press the power button once that’s it done.
could you please help me, when i click start it says "action required 1: power on mac and boot into normal mode (u will see the earth globe and menu for network) 2: after this enter your mac into dfu and try again. PLEASE HELP.
2019 perfect 👌🏻 yes I know what the problem is so you need to update the bridge OS to do that download Apple Configurator 2 from the Mac App Store on your host Mac 💻 connect the USB C to USB C and do a DFU restore on the target Mac which is the iCloud locked Mac once the restore is done set it up by going to the activation lock screen and then connect to checkm8 and do the bypass if the exploit fails 1st time it will work the second time. If you don’t know how to restore your MacBook 💻 using Apple Configurator 2 please go on TH-cam there’s plenty of videos out there on that sorry for the long reply but if you want you’re Mac running and fully activated then it requires a bridge os update thanks for your time.
@@FOR-THE-RECORD-ICLOUD-HELPER could you please help me. i am trying to restore my locked mac with the apple configurator but it will not let me restore or revive or anything. why?
[SOLVED] If the Macbook goes back to Activation Lock screen after successful bypass and reinstalling MacOS, all you need to do is connect your Host Device with the locked device and bypass again, and then only press the power button… You’re all set. It will bring you to the setup screen… If it fails, do it few more times
Is yours still untethered because if it’s untethered it will update OTA no RE-LOCK but apple patched the untethered about 6 weeks ago so it’s back to tethered again so yours must be untethered 👍
@@FOR-THE-RECORD-ICLOUD-HELPER have new one question :) i have one mac mini 2018 with untethered bypass, can i cloned system with this bypass on second mac mini 2018?
i paid this software and didnt work, written bypass failed, Please reconect your macs device info DFU mode and try again, restore also cannot be granted Please how to solved ? What am I doing wrong ?
@@FOR-THE-RECORD-ICLOUD-HELPER I'm already one step further, after successfully installing os, the activation lock window pops up again, I still can't do it, I don't know what to do with it, where is the way to contact you?
There’s no way to contact me I don’t have any other social media handles just private ones do the bypass when it says successful on checkm8 just press the power button and go through the setup that’s it done 👍
I get the Macos reinstalled, but after it reboots I get the activation lock screen again. I try to boot to the volume via disk select and I get "Unable to verify startup disk" Try again or select another startup disk. iMac 27" 5K 2020 Sonoma install
@@FOR-THE-RECORD-ICLOUD-HELPER I'm not sure I understand properly. I get the success in Check M8, I press the power button on the iMac, It boots, I connect my wifi / ethernet, Recovery mode, Erase disk, reinstall, and after the reinstall I get the activation lock screen again. I do not ever get to the macOS setup screen.
@TheCavalry98 that’s correct you have done everything fine there was a patch from Apple no surprise there huh since I made this video so after you have done every thing correct which you have after the installation and you get to the activation Lock Screen that’s when you connect it back to your host Mac open the checkm8 T2 bypass it and then on your locked Mac / Target Mac press power you will then go through the setup done 👍 Bloody Apple ayy 😠 can’t help themselves can they anyway that’s all you need to do 👍
@TheCavalry98 ok @ this stage I have tried to the best of my ability to walk you through this step by step to no avail now in this case what you need to do is contact checkm8 support via email 📧 to contact@checkm8.info and explain it to them they may take a few hours to get back to you as there really busy but they will get back to you good luck 🤞
Ok so checkm8 just got back to me and it’s still undergoing maintenance the dev team should resolve the issue soon the maintenance is due to a recent apple security update 👍
Yes I recently put a post ✉️ on my community wall I received the email from checkm8 about an hour ago they weren’t able to fix the untethered unfortunately but they have replaced it with the tethered version and yes I agree hard reboot = tethered does destroy the bypass as you need another computer on standby here’s the post ✉️ from checkm8 ⬇️ th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=1XQgF-KLHfTs2Eev
NOTE: Customers who purchased the untethered version early can reuse the Checkm8.info tool [iCloud Bypass MacOS T2] to bypass their devices again without any limitations!
@@FOR-THE-RECORD-ICLOUD-HELPER I barely understand the meaning of “NOTE:...” does this mean that those who placed an order previously receive UNTETHERED? or do we also get TETHERED?
It means the people who done the bypass when it was untethered and there devices have re-locked due to erasing the device can just connect and bypass and for them it will be untethered like mine for example, but if it’s the 1st time you’re doing the bypass from yesterday when checkm8 released it then you can only use it as a tethered bypass only see what I mean 👍
No it use to be untethered but apple patched it as long as you don’t power it off by pressing the power key if you just select the apple logo top 🔝 left and select shutdown it will prevent this from happening also try not to let the battery 🪫 die other than that your good to go 👍
@@FOR-THE-RECORD-ICLOUD-HELPER ah damn. thanks so much for the quick reply. really appreciate the info!! 👍🏻👍🏻 do you think its a possibility we'll get an untethered version in the near future?
I tried and the OTA update is blocked 🚫 Unless you’re using the untethered version as that got patched 2 months ago only the tethered is available now. You can try to update but you’re probably going to get an error as well.
@@FOR-THE-RECORD-ICLOUD-HELPER am on untethered bypass. i clicked on ota updateit started downloading macos sequoia, then i hesitated and canceled the download process. not yet sure if it is safe to update
There is a windows tool for the T2 bypass but I don’t have access to it watch the video and contact the developer ⬇️ th-cam.com/video/yNW0WwOBFvc/w-d-xo.htmlsi=qtxVq45eOqbnVh8a
Hey so I have a question its not allowing me to download checkm8 its telling me that It couldn’t be opened because its from an unidentified developer how do I get this to work?
@@FOR-THE-RECORD-ICLOUD-HELPERhey so it allowed me to bypass once but it made me install catalina I tried resetting and updating it to sonoma and now its not working on maybe I am not doing it properly it gave an error
The yellow triangle error yes because the OTA updates are blocked 🚫 you need to start from the beginning do the bypass press power command option + R the Mac OS recovery needs to go to Sonoma so you can proceed with the installation from there l.
The start up disk I know do the bypass then press power command option + R let it go to recovery and proceed from there you probably just erased something inside intentionally or otherwise.
Hello. I can get to the installation of the system. but after a while installing it restarts and appears again in the activation lock. What can I do? (I erase the disk before and everything passes fine)
Thats what i did, as the tutorial says, the thing is that after a while installing the operative system (minute 12:16) it doesnt appear the screen that it shows at minute 12:27. Instead it shows the activation lock back.
@@hectoribarz9819I just deleted my comment cause I got this working. So this happened to me originally but I would just single press (not press and hold!) and then run the program again. Took me 3 tries but it eventually worked.
I have done everything step by step and it worked, but when I long press the power button it still tethered!!! I thought this bride was untethered permanently!
Stage 2 do you get the red line exploit failed or yellow line exploit failed. It keeps happening and you have tried the DFU more than 3 times do a full restore using Apple Configurator 2 that will bring your Mac 💻 to the latest bridge OS 8.4 that should fix it if it doesn’t be sure to contact checkm8 support 👍
@@FOR-THE-RECORD-ICLOUD-HELPER Thanks ill give that a go, Have a 2017 so need to find a dmg for it. Just out of interest the checkm8 advises that unlock is tethered not untethered?
Yes it’s tethered it was untethered but then it got patched about 2 months ago I put this here on my community post ⬇️ th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=oQr9qyw5vZA_hEu7
@@FOR-THE-RECORD-ICLOUD-HELPER I got it bypassed it installed sonoma ok this time then went to activation screen after the install again. I shut down and powered on pressing option key but still goes to activation.
@@FOR-THE-RECORD-ICLOUD-HELPER got it, but the problem is I just can get macOS Catalina! When I want to make a second start volume with Ventura/Sonama it just installs till 8 minutes then it said Failed! I tried everything but nothing works! Is there any chance for an update?
Yes you can problem is ATM the servers are down for the iCloud bypass for T2 MacBooks 💻 soon as there back up and working I will be sure to keep you informed 👍
Yes internet recovery can fail multiple times on some occasions you can get it right the 1st time the 3rd time sometimes the 20th time the best thing to do is reset the NVRAM press power then command + option P + R @ the same time for 20 seconds. Then start the internet recovery again using command option + R
Yes it does work ICLOUDHELPER029 The bypass for T2 MacBooks 💻 iCloud locked the server is currently down on them still waiting on a fix soon as checkm8 announces the fix I will update you.
@@FOR-THE-RECORD-ICLOUD-HELPER Check if an update hasn't come out for you... as I just performed the bypass, it was necessary to update the program to the new version.
Confirmed 3.0.1 is the new download checkm8 probably haven’t announced it yet as there still over the moon 🌙 with the A12+ devices thank you for bringing this to my attention you deserve A ⭐️ 👍💯
@@FOR-THE-RECORD-ICLOUD-HELPER sir" why always like this after finish instalation" an error occurred installing macos. you can try again to complete the installation
Untethered has been patched but tethered works on all MacBooks 💻 iMac 🖥️ Mac mini with the T2 chipset on sequoia as well here’s the latest video 1 week old 👍⬇️ th-cam.com/video/cvCfHW4Q_-0/w-d-xo.htmlsi=-yme6_TyGIvziAP0
thanks man worked on my Macbook pro 2019 16 inch
Does it actually work?
I have a few questions before I decide to bypass my mac
If it dies do I have to worry about rebypass?
Can the mac randomly lock if I didn’t update or etc?
Sometimes you need to re-bypass when the battery dies sometimes you don’t, it won’t just randomly lock it will only lock if you power on/off using the power button so don’t use that 👍
Just bought Checkmate to bypass my 2020 macbook pro, thanks
Just tried this tonight and it works just as you described. Nice one!
Are you sure that a "Transfer or Reset" will bring back the Activation Lock? I haven't tried it yet, but just wondered.
Yes a reset will bring it back NO QUESTION my friend.
Why not permanent remove mdm? (Serial change)
This is for Activation locks, not MDM
Here’s the removal for T2 MDM ⬇️
th-cam.com/video/z1rRc4xYaT8/w-d-xo.htmlsi=Dy_gP_GoQuf99Xm0
@@FOR-THE-RECORD-ICLOUD-HELPERnot a Permanent Bypass till today??
On my mac mini i bypassed if i unplugged it, even after doing a shutdown, it would need rebypassing. In guessing from now on once i do the bypass it will no longer need to be rebypassed, whether i hard reset or loose power.
Will i be able to update macos (ie 14.4) without re bypassing though?
All of what you’re asking is very detailed in the video 👍
Are there any other payment methods apart from credit card, Bitcoin, e.g. PayPal?
Does this new update completely delete iCloud? I bought it recently and the bypass was successful, but when I turn it on again by long pressing the power button, I continue to get the Activation locked error. My device is MacBook Pro 2019 16" İnch installed version: sonoma 14.4
It’s an untethered bypass but you don’t need to worry about the hard reboot anymore as this method fixes it and if you have already done the bypass using checkm8 then your good to go 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I used checkm8 But when I press the power button for 10 seconds, the activation screen appears again.
Not with this method it doesn’t
@@FOR-THE-RECORD-ICLOUD-HELPER Can I do it with the checkm8 I bought before?
Yes you can 👍
I HAVE TRUBLE 🚫🚫🚫🚫🚫
When i install macOS aftet 3 hours
Show me (an error occurred installing macos)
PLEASE PLEASE help me what shuld i do
The OTA is blocked 🚫 from updating to get to the latest Sonoma you need to start from the beginning that’s why it’s important to use command option + R because it shows Sonoma in the Mac OS recovery if you use command + R it will show you the default Mac 💻 OS
.. grand ! You legend .. 🎉
Dear, I am having problem with Macbook Air 2018 Activation Lock bypass. I am getting error on Stage 2 failed. Please reconnect device into DFU mode.
I tried multiple times even with different Macbooks as but still same
Ok when that happens you need to restore your MacBook 💻 using Apple Configurator 2 as the bridge OS needs updating once updated then it will work 👍
Can I upgrade from 14.4.1 to Sequoia 15.1 with bypass performed?
The OTA update is blocked 🚫 on checkm8 so you can’t update you can get your iCloud locked Mac on sequoia and here is how I uploaded this 2 days ago ⬇️
th-cam.com/video/cvCfHW4Q_-0/w-d-xo.htmlsi=rSUusPntBMbxtAj6
help
I have tried several times and I always get the same message, there was an error installing mac os.
Ok I’m assuming you erased the disk utility before proceeding with the installation of Mac OS Sonoma ok there is an easy fix to your problem, you need to do a DFU restore of the target 🎯 mac = the iCloud locked 1 using Apple Configurator 2 what that does is it updates the bridge OS once you have done that start from the beginning and proceed that will fix the installation error 👍
@@FOR-THE-RECORD-ICLOUD-HELPER can it be updated?
Once your in the device and the bypass is complete like I said in my video I would turn off automatic updates as your already on Sonoma @ that stage anyway.
I get to stage 2 during the dfu but it gives me an error wont go past this stage. Tried different sync cables and verified the target macbook with apple config. Any suggestion
Yes the servers are still down on the iCloud bypass for T2 MacBooks 💻 ATM when there is a fix I will let you know.
Cheers thanks for your reply
NP 👍
It’s working go on checkm8 website and download the new version 3.0.1 👍
What do I do if in the recovery step 8:43, stuck on apple logo? MacBook Pro A2141 iBridgeOS 8,4
It won’t be stuck on apple logo it will give you an error code because internet 🛜 recovery fails sometimes like I said in the video if that happens do the bypass again and boot into Mac OS recovery make sure you use command option + R so it will show Sonoma
Can I upgrade from Catalina?
I couldn't restore Sonoma with my 2019 MacBook Air, I kept getting an error after it gets to 14 mins before restart. So I did with Catalina and everything works fine.
I think the OTA update is blocked you can give it a try, here’s the thing when getting persistent error codes on internet 🛜 recovery there’s an easy fix to it all you need to do is refresh the PRAM so @ the beginning press power command option P and R until the spinning globe shows that’s how you fix internet recovery errors.
I just downloaded Ventura and the upgrade was smooth without any issues. So I believe I can do the same with Sonoma. Thank you
Thank you so much this worked for me and I used your promo code. saved some cash☺
NP 👍 and thank you 🙏
I honestly would just like to know how this works? This is obviously using the issue found in the T2 chips that allows you to Jailbreak them but how does the machine not get iCloud locked again when connected to a WiFi network? The serial number reports the machine as iCloud locked so surely when it connects back up to Apple's servers it does it all over again?!
It gets locked again if you erase all content and settings because it’s a bypass which means its software related, yes the SN does indeed confirm that (FMM) FIND MY MAC is indeed turned on but just like an iPhone or iPad that is bypassed it’s done in such a professional manner the techniques are remarkable it enables the devices to be fully activated so they can be used as a device that is basically purchased from a shop interesting right well that’s all you’re getting from me, you want more do some research 🔬 👋🏻
I've just done it on my mac t2 macOS Ventura, is it the same thing? Can i still shut down my MacBook normally now?, because i did do the bypass with checkm8 at the end of the bypass message they said "attention, do not make force restart, else you'll go through the bypass again"
No the untethered has been patched only the tethered is available NO force shutdown look I done a video on it the other day on sequoia as well ⬇️
th-cam.com/video/cvCfHW4Q_-0/w-d-xo.htmlsi=vwgPWTnxFKOMnjeq
@@FOR-THE-RECORD-ICLOUD-HELPER aight thank u mate, there's just a small problem I'm facing, after the bypass and the internet recovery, when i finish installing MacOs Ventura, it always tell me that there was an error while installing the MacOs, and i should redo it again, I've done it three time for now and it's always giving me the same thing... Any ideas?
You need to restore the mac 💻 by using Apple Configurator straight forward process that’s Y your having this trouble because restoring the T2 MacBooks updates the bridge OS as well it’s also mentioned in my recent video I sent you 👍
@@FOR-THE-RECORD-ICLOUD-HELPER alright great, and i hope that won't require buying a new bypass!
No if you have already paid for it on that specific device you won’t have to pay again 👍
Hey i have a 2019 mac pro on Mojave the seller told me it is bypassed but i can turn it off and on from the button reser nvram so if i update the macos will it relock ? thanks for your time
Depends what bypass service that was used some OTA updates are blocked 🚫 some aren’t.
@@FOR-THE-RECORD-ICLOUD-HELPER can you provide some steps to take to make sure bcz i want to fix the sound issue by upgrading the OS !
When pressing cmd + opt + R, I only get into the macOS Ventura recovery and the macOS Ventura installations fails because of an error. I have a MacBook Pro 13“ 2020 and it should support macOS Sonoma. Any idea what I could do?
Yes I have a fix for that so basically you’re Mac 💻 is running an old bridge OS and you need to update it to do that you need to restore the locked Mac 💻 using Apple Configurator 2 on the host Mac 💻 after the restore is complete do the bypass use command option +R and it will show Sonoma in the Mac OS recovery if you don’t know how to use the restore here’s a video a step by step guide for you ⬇️
Remember do not revive use the restore ok 👍
th-cam.com/video/UaVgBP4gJsU/w-d-xo.htmlsi=z8hbTDpuHmwuyPA0
@@FOR-THE-RECORD-ICLOUD-HELPER Thank you
hello i buyed a 2018 macbook pro with iCloud bypass t2 with Mojave os installed on it can I update my os to Sonoma or a further version without loosing the bypass ?
When it was untethered you could but apple patched it so as it’s tethered I’m not sure you may need to start from the beginning but yes give it a try 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I don’t know if my Mac is unthethered or not so is it safe if I try to update it
Yes but back up everything 1st just in case ok 👍
Hello, I have a MacBook Air 2020 and it has an activation lock. Will I be able to update after bypassing?
The untethered version is patched they have now released the tethered version please read this below ⬇️ also it’s cheaper 59.99
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=gKJX8EMs8QFLbY23
Alright.
Good evening, the server has been experiencing an error for a few days, do you have an estimate of when it will return?
Same here tech guys saying they are working on some update should be back soon. reply this if you reach the servers. I'll do the same for you OK mate?
Yes it should be working soon 🔜 I will keep you updated just like everyone else 👍
Thanks mate
NP 👍
@@mastermindnomad It has been resolved, the new tool has been launched!! just update and perform the bypass.
I really am having an issue. i even have proof the mac is mine but i have an a2141 and it just continues to go in and out of dfu not completing the checkm8 process. my other mac is ancient usb only, my newer 13 pro im waiting on a new ribbon for the notorious keyboard/trackpad death. i do have an imac but it has a thunder port not c.. i have a thunder to usb c cord coming today. any ideas? is the imac not fast enough? it screams.. but anyway im so frustrated and start school the 15th and i need this macbook pro working.. i bought it let my ex use it and she said she'd give me the macbook back to let her share our dog.. she gets my 2,000 dog and then locks me out of the mac.. thats the least of what she did.. cost me 15 years and a business i built making 200k... lawyers are at work. but im screwed right now.. PLEase give me some advice
Ok under these circumstances you need to email 📧 checkm8 support @ contact@checkm8.info
Tell them everything ok 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I did thanks but I was hoping to make sure you get a commission etc. or just any reassurance my model will work
Thank you my friend I really appreciate that and yes just to confirm model A2141 is indeed compatible for iCloud bypass on T2 MacBooks 💻 the Mac 💻 may need a update on the bridge OS which would indeed require a another MacBook to use as a host MacBook 💻 using Apple Configurator 2
hello, I was unable to bypass activation on a macbook air 2019 a1932, when I get to installing mac os sonoma 14 minutes before loading and registering the macbook goes out and restarts
on the activation window, what should I do if I went around 5 times and nothing has changed?
Ok when it restarts it’s still installing the Mac OS so when you go through the setup then and reach the activation lock then connect to the other Mac do the bypass and just press the power button on the locked Mac 💻 done 👍
@@FOR-THE-RECORD-ICLOUD-HELPER
thank you very much for your help, everything worked
Hello can i use a MacBook pro 15 late 2013 for bypassing my A2141 ? It doesn't have usb-c ports , can i use usb-A to usb-c cable ??
Yes you can the host Mac 💻 can be any Mac 💻 the only Mac 💻 that needs to be T2 is the locked Mac AKA The target 🎯 Mac 👍
@@FOR-THE-RECORD-ICLOUD-HELPER i mean , there is no issue that the host Mac doesn't have usb-c port ? i can use a usb-A to usb-c , right ?
Yes as long as it’s a data sync cable.
I bypassed it but my Mac is on macOS mojave from like 2018. Is there a way of updating it without having to do checkm8 again and if not then if I connect my MacBook to another one and restore it to latest update and then redo check mate will it work
Also if I did update it then would it be possible that they have patched checkm8 from working
You can try to update it OTA if it doesn’t work then yes re-bypass with checkm8 you can do that as many times as you want as your device is now added to there database 👍
The Mac bypass hasn’t been patched it’s just gone from untethered to tethered read this from checkm8 ⬇️
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=0ZD3klsxDFhJVNkz
Hi! I used your application after purchase and I've got this error messages -2004F and -3401F. After use the application at first time, now I obtain this error: cannot use thunderbolt accessory connect accessory using a thunderbolt capable cable
That’s an easy fix ignore the thunder bolt accessory when you’re Mac 💻 goes into internet recovery mode you may get that error a few times but eventually it will successfully enter into the Mac OS recovery make sure you use command option + R so Mac OS Sonoma will show try to get it done today before Mac OS sequoia is released because it will patch it you got this 👍
Hello, I have a iMac 5k 2020 I paid for the service and after the bypass step the iMac turns on by it self with a question mark folder and the Checkm8 software shows that is successfully bypassed.
The❔folder what does the writing say under the folder 📁 for example/startup disk at the end
When the bypass says successful on the target mac which in your case is an iMac 🖥️ using the keyboard press power command option + R it will go to the Mac OS recovery and install from there as I show you in the video 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I already installed the Mac OS Sonoma and now I have an issue with the audio, it has NO SOUND output (except for start-up chime) I tried with Mac OS Monterrey also and still no sound. Do you think guys this issue is related with the Bypass?
That’s not related to the bypass the bypass is software related we’re as with sound audio could be the sound card as if you can hear the chime the speakers 🔊 are working fine
@@FOR-THE-RECORD-ICLOUD-HELPER Okay, thank you.
friend asks me a question, I performed the bypass on a 2019 MacBook Pro, I tried connecting with: Command + Option + R, and only the Monterey version comes, but it gives an error during installation, in short, I can only install the Mojave version, like Can I upgrade to Sonoma?
The thing is Like I explained in the video it’s really important to use command option + R so that Sonoma will show so that you can install from the Mac 💻 OS recovery as if you use command + R it will go to the default being Mojave or Catalina now if you install from the default once in the Mac you cannot update it as the OTA is blocked 🚫 that’s Y you need to start from Sonoma, what I find strange is any T2 MacBook 💻 2018-2020 using command options + R will go to Sonoma but in this case your saying you’re friend has used command option + R on a 2019 and it’s only going to Monterey professionally speaking I’ve never heard of that happen Not on a T2 are you sure that your friend didn’t just use command + R and that’s why it’s gone to Monterey because that’s the only thing that makes sense.
Maybe 🤔 you’re friend needs to update the bridge OS so that Sonoma will show as it’s important you know 👍
yes you can do it. but during the process, when the MacBook reboots, you need to do a bypass and give the command to boot from the disk, and not from Internet recovery. If I apologize for any misunderstanding, I use Google translator from Russian
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=1xgQGmyXrMnZky1G
@@FOR-THE-RECORD-ICLOUD-HELPER I'm the one doing the bypass, when I turn it on by holding: Option + Command + R, it goes to Monterey, but it always gives an error with 1 minute left, when I turn it on by holding Command + R it goes to Mojave and works normally... I think it was Luckily, I've done everything and nothing works.
I see have you restored that MacBook 💻 using Apple Configurator 2 and done a DFU restore on it as I believe the bridge OS needs updating it will work on Sonoma but it’s a hard reboot = a tethered bypass please read the link 🔗 I sent above ⬆️ and thanks for your time.
hey @FOR-THE-RECORD-ICLOUD-HELPER I have used checkm8 succesfully but it is not untethered. it loses the jailbreak often, and easy with a hard reset. How do you make it untethered?
The fully untethered was patched a few weeks ago, that’s why the price has gone down here’s the latest post ✉️ from checkm8 regarding the T2 MacBook 💻 IC locked 👍⬇️
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=MpZMRK0iKZDevyFs
By doing the bypass, can I install Windows with Bootcamp?
Yes but I wouldn’t recommend that on a bypassed device.
Is there a way of knowing which bridge OS you are running?
Yes when you connect it in DFU mode open checkm8 and it will say the number for example 8.1/8.3/8.5 but the servers are still down I will let you know when there up and running.
@@FOR-THE-RECORD-ICLOUD-HELPER thank you! I also have a 2021 m1 MacBook I know they don’t have t2 but I am wondering if you believe there will be a method to unlock those in a similar fashion. Unfortunately not MDM.
My 2019 MacBook pro has been bypassed but it could not install MacOS as it showed “cannot install MacOS try again”. I have done trough bypass process several times but it still show the same after I waited it install MacOS for 2 hrs. Do you have any recommendation?
Try again with the yellow triangle right, are you trying to install Sonoma from the beginning the Mac 💻 os recovery
@@FOR-THE-RECORD-ICLOUD-HELPER Yes right, it was installed Sonoma on first time. After that, it always show Ventura for me but the yellow triangle still appear at the last minute of installation again.
I also selected SSD as you have done in this video and erased it before reinstall MacOS
Are you selecting command option + R and going to the Mac OS recovery from the beginning it needs to show Sonoma and install from there done 👍
@@FOR-THE-RECORD-ICLOUD-HELPER yes, I do but it shows Ventura by the way can I try to use time machine backup from other mac or install MacOS via flash drive?
Do you know when activation server will be up and running. In getting t2 server under maintanence error
The checkm8 dev team are still currently working on it, hopefully they will have a fix soon 🔜
Same here. Waiting to hear when the server will be up. Thanks
Is the server still down?
@Gadgetech84 So far yes. They can't figure out how to bypass apples latest security 😞
Leaving a comment so I get notified if it comes back up.
Hey, can i update my macbook pro to sonoma without being locked out again?
The MacBook should already be on the latest Sonoma like I showed in the video command option + R in some cases OTA updates are blocked 🚫 so you cannot update from say Mojave or Catalina to Sonoma if you have done command + R and your on and older Mac 💻 OS I would advise you do the bypass again using command option + R thanks 👍
Hi, I have a problem. I paid for the application to be able to bypass iCloud, but it doesn't work either, I click on "start" and the laptop comes out of DFU mode, what could I do in this case?
That’s not a good sign when you’re Mac 💻 jumps out of DFU while performing the bypass because the bypass will fail, you may need to update to the latest bridge OS by restoring through Apple Configurator and hopefully that will fix it but if it’s a hardware issue then it won’t, there’s loads of videos on TH-cam that show you how to restore a T2 Mac 💻 using Apple Configurator good luck 🤞
@FOR-THE-RECORD-ICLOUD-HELPER ok, thanks !
@FOR-THE-RECORD-ICLOUD-HELPER hello, I apologize for the trouble once again, look, in the end I managed to bypass it but I still have a problem... I deleted the partition nicely, I install mac-os and at the end the mac stops, then it starts again and at the end I have to configure the language and it takes me to activate the mac, it seems that it doesn't want to skip the activation part, can you help me in this case? (I tried 3 times and nothing)
Yes when it gets to the activation lock connect it to checkm8 and bypass it again once checkm8 says successful then just press the power button once that’s it done.
@FOR-THE-RECORD-ICLOUD-HELPER okay, thank you very much, I probably wasn't paying attention. (I'm too tired and I probably didn't notice this aspect)
could you please help me, when i click start it says
"action required 1: power on mac and boot into normal mode (u will see the earth globe and menu for network) 2: after this enter your mac into dfu and try again. PLEASE HELP.
What model MacBook 💻 are you using
@@FOR-THE-RECORD-ICLOUD-HELPERmac book pro 2019 is the one locked what yr should my host be?
2019 perfect 👌🏻 yes I know what the problem is so you need to update the bridge OS to do that download Apple Configurator 2 from the Mac App Store on your host Mac 💻 connect the USB C to USB C and do a DFU restore on the target Mac which is the iCloud locked Mac once the restore is done set it up by going to the activation lock screen and then connect to checkm8 and do the bypass if the exploit fails 1st time it will work the second time.
If you don’t know how to restore your MacBook 💻 using Apple Configurator 2 please go on TH-cam there’s plenty of videos out there on that sorry for the long reply but if you want you’re Mac running and fully activated then it requires a bridge os update thanks for your time.
@@FOR-THE-RECORD-ICLOUD-HELPER could you please help me. i am trying to restore my locked mac with the apple configurator but it will not let me restore or revive or anything. why?
IDK IF THE RESTORE DOESN’T WORK THROUGH APPLE CONFIGURATOR THAT MEANS YOUR MACBOOK 💻 HAS A LOT MORE PROBLEMS THAN JUST AN ICLOUD ACTIVATION LOCK.
[SOLVED] If the Macbook goes back to Activation Lock screen after successful bypass and reinstalling MacOS, all you need to do is connect your Host Device with the locked device and bypass again, and then only press the power button… You’re all set. It will bring you to the setup screen… If it fails, do it few more times
Spot on correct 👍 I done a video on that last night it will be on my channel later sequoia as well.
i just update Sonoma 14.6.1 for 2019 Mackbook pro bypass it worked
Is yours still untethered because if it’s untethered it will update OTA no RE-LOCK but apple patched the untethered about 6 weeks ago so it’s back to tethered again so yours must be untethered 👍
Maybe do you know, when checkm8 team do untethered bypass?
I lost when read posts about 2 month fix.
Nothing on untethered yet.
@@FOR-THE-RECORD-ICLOUD-HELPER maybe you know, this team working on untethered bypass?
That’s correct 👍 yes they are should be soon 🔜 now
@@FOR-THE-RECORD-ICLOUD-HELPER have new one question :)
i have one mac mini 2018 with untethered bypass, can i cloned system with this bypass on second mac mini 2018?
i paid this software and didnt work, written bypass failed, Please reconect your macs device info DFU mode and try again,
restore also cannot be granted Please how to solved ?
What am I doing wrong ?
Yes this happens sometimes the exploit fails when in DFU just reconnect it and try again it will work you will see it go up in 3 stages.
@@FOR-THE-RECORD-ICLOUD-HELPER
I'm already one step further, after successfully installing os, the activation lock window pops up again, I still can't do it,
I don't know what to do with it, where is the way to contact you?
There’s no way to contact me I don’t have any other social media handles just private ones do the bypass when it says successful on checkm8 just press the power button and go through the setup that’s it done 👍
Would this work with 16” M1 Max 2021 ? It’s wiped out now and asks for iCloud data or user password to activate
This method is for T2 only
@@FOR-THE-RECORD-ICLOUD-HELPERwat about MB air 2018
Yes that will work
I have an A2179 emc 3302 how much to bypass it man?
The price for the icloud bypass on checkm8 website for the T2 Mac is 59.99 USD
I get the Macos reinstalled, but after it reboots I get the activation lock screen again. I try to boot to the volume via disk select and I get "Unable to verify startup disk" Try again or select another startup disk. iMac 27" 5K 2020 Sonoma install
When the Mac 💻 os gets installed and it goes to the activation lock so the bypass and on the locked computer just press power that’s it done 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I'm not sure I understand properly. I get the success in Check M8, I press the power button on the iMac, It boots, I connect my wifi / ethernet, Recovery mode, Erase disk, reinstall, and after the reinstall I get the activation lock screen again. I do not ever get to the macOS setup screen.
@TheCavalry98 that’s correct you have done everything fine there was a patch from Apple no surprise there huh since I made this video so after you have done every thing correct which you have after the installation and you get to the activation Lock Screen that’s when you connect it back to your host Mac open the checkm8 T2 bypass it and then on your locked Mac / Target Mac press power you will then go through the setup done 👍
Bloody Apple ayy 😠 can’t help themselves can they anyway that’s all you need to do 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I did it all, does not work... :(
@TheCavalry98 ok @ this stage I have tried to the best of my ability to walk you through this step by step to no avail now in this case what you need to do is contact checkm8 support via email 📧 to
contact@checkm8.info and explain it to them they may take a few hours to get back to you as there really busy but they will get back to you good luck 🤞
Hi, I am trying to bypass activation lock and the error I get is the T2 activation server is under maintenance. What should I do now?
Wait a few hours and it should be sorted say later tonight it should work as far as I’m aware it hasn’t been patched but I will look into it 👍
@@FOR-THE-RECORD-ICLOUD-HELPER I am in Africa GMT time. So it will be of help to know the timeframe. That will be great
Hi Sir. Please any updates?
I have emailed checkm8 just waiting for them to get back to me 👍
Ok so checkm8 just got back to me and it’s still undergoing maintenance the dev team should resolve the issue soon the maintenance is due to a recent apple security update 👍
Would this work on a Mac Pro 2019?
Yes it does 👍
Does your bypass actually have a hard reboot? In mine supposedly untethered from the iremove tool - hard reboot destroys the bypass ((
Yes I recently put a post ✉️ on my community wall I received the email from checkm8 about an hour ago they weren’t able to fix the untethered unfortunately but they have replaced it with the tethered version and yes I agree hard reboot = tethered does destroy the bypass as you need another computer on standby here’s the post ✉️ from checkm8 ⬇️
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=1XQgF-KLHfTs2Eev
NOTE: Customers who purchased the untethered version early can reuse the Checkm8.info tool [iCloud Bypass MacOS T2] to bypass their devices again without any limitations!
@@FOR-THE-RECORD-ICLOUD-HELPER I barely understand the meaning of “NOTE:...” does this mean that those who placed an order previously receive UNTETHERED? or do we also get TETHERED?
It means the people who done the bypass when it was untethered and there devices have re-locked due to erasing the device can just connect and bypass and for them it will be untethered like mine for example, but if it’s the 1st time you’re doing the bypass from yesterday when checkm8 released it then you can only use it as a tethered bypass only see what I mean 👍
i got mine to work but after a week or so itll ask me to activate it all over again. any way to stop that from happening permanently that you know of?
No it use to be untethered but apple patched it as long as you don’t power it off by pressing the power key if you just select the apple logo top 🔝 left and select shutdown it will prevent this from happening also try not to let the battery 🪫 die other than that your good to go 👍
@@FOR-THE-RECORD-ICLOUD-HELPER ah damn. thanks so much for the quick reply. really appreciate the info!! 👍🏻👍🏻 do you think its a possibility we'll get an untethered version in the near future?
We will certainly get an untethered version in the near future but I don’t have a timeframe on that unfortunately.
Hi, will this work on 2337 and 2338??
Cheers
No T2 only
Can you carry out the process with a macos virtual machine? in windows
NO NOTHING YOU CAN DO WITH A VM OR KALI MY FRIEND.
Is it safe to update to macos sequoia ? Please answer me bro
I tried and the OTA update is blocked 🚫
Unless you’re using the untethered version as that got patched 2 months ago only the tethered is available now.
You can try to update but you’re probably going to get an error as well.
@@FOR-THE-RECORD-ICLOUD-HELPER am on untethered bypass. i clicked on ota updateit started downloading macos sequoia, then i hesitated and canceled the download process. not yet sure if it is safe to update
I hear you brother I really do 👍
Please any leads on Where to buy these icloud MacBooks
Is there any windows based programs?
There is a windows tool for the T2 bypass but I don’t have access to it watch the video and contact the developer ⬇️
th-cam.com/video/yNW0WwOBFvc/w-d-xo.htmlsi=qtxVq45eOqbnVh8a
Hey so I have a question its not allowing me to download checkm8 its telling me that It couldn’t be opened because its from an unidentified developer how do I get this to work?
I am using MacOs
Settings / privacy and security and scroll down under security it will say allow or open anyway proceed to install done.
@@FOR-THE-RECORD-ICLOUD-HELPERhey so it allowed me to bypass once but it made me install catalina I tried resetting and updating it to sonoma and now its not working on maybe I am not doing it properly it gave an error
Does it matter that my other macbook is an older mac using bigsur?
The yellow triangle error yes because the OTA updates are blocked 🚫 you need to start from the beginning do the bypass press power command option + R the Mac OS recovery needs to go to Sonoma so you can proceed with the installation from there l.
brother before i done my mac bypass worked perfectly after again locked and nowww when try bypass done after flashin apple logo and not worked i donno
and file sign flashing like no HDD drive
The start up disk I know do the bypass then press power command option + R let it go to recovery and proceed from there you probably just erased something inside intentionally or otherwise.
@@FOR-THE-RECORD-ICLOUD-HELPER ok i ll try and let u kno
Hello. I can get to the installation of the system. but after a while installing it restarts and appears again in the activation lock. What can I do? (I erase the disk before and everything passes fine)
That’s fine when it goes to the activation lock then after installing do the bypass on checkm8 and on the locked Mac just press power that’s it.
Thats what i did, as the tutorial says, the thing is that after a while installing the operative system (minute 12:16) it doesnt appear the screen that it shows at minute 12:27. Instead it shows the activation lock back.
@@hectoribarz9819I just deleted my comment cause I got this working. So this happened to me originally but I would just single press (not press and hold!) and then run the program again. Took me 3 tries but it eventually worked.
@@raphz1428 sorry. hold down what?😅
I do everything like in the video (I think so😅)
great✌️ thank you
I have done everything step by step and it worked, but when I long press the power button it still tethered!!! I thought this bride was untethered permanently!
It was until apple patched it ℹ put it on my community post here ⬇️
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=t9HHEX9Ya8dTTqpM
Will this work on a M1?
NO T2 ONLY 👍
Can you reinstall macOS using a usb drive if you have slow or unstable internet?
NO YOU NEED FULL ACCESS TO THE INTERNET 🛜 FOR THIS ONE ITS NOT THAWED FOR EXTRACTION FROM USB INSTALLATION
Stage two keeps failing I’m not sure how to fix it?
Stage 2 do you get the red line exploit failed or yellow line exploit failed. It keeps happening and you have tried the DFU more than 3 times do a full restore using Apple Configurator 2 that will bring your Mac 💻 to the latest bridge OS 8.4 that should fix it if it doesn’t be sure to contact checkm8 support 👍
@@FOR-THE-RECORD-ICLOUD-HELPER Red. It says “ stage 2 failed please reconnect into dfu mode “
Ok do a DFU restore Apple Configurator 2 your Mac 💻 maybe on an old bridge OS to update do what I said above ⬆️
Hi I have 2018 macbook pro 13.3 it all works as per video I erase drive and install sonoma it always fails at 1% done it like 5 times.
I mean it gets to 1 minute remaining every time
You need to update the bridge OS by doing a restore using Apple Configurator 2 then it will update fine 👍
@@FOR-THE-RECORD-ICLOUD-HELPER Thanks ill give that a go, Have a 2017 so need to find a dmg for it. Just out of interest the checkm8 advises that unlock is tethered not untethered?
Yes it’s tethered it was untethered but then it got patched about 2 months ago I put this here on my community post ⬇️
th-cam.com/users/postUgkxghdZKiXKiPyyKRJbpRlwL6GeAV6emnwV?si=oQr9qyw5vZA_hEu7
@@FOR-THE-RECORD-ICLOUD-HELPER I got it bypassed it installed sonoma ok this time then went to activation screen after the install again. I shut down and powered on pressing option key but still goes to activation.
does it still work with 14.4.1 ?
YES
@@FOR-THE-RECORD-ICLOUD-HELPER Thank you very much mate !
Any news on activation server?
No nothing yet I will update when or if FIXED 👍
It’s working go on checkm8 website and download the new version 3.0.1 👍
Can we byepass M2 mac also
Not for iCloud no
macbook pro 2021 16inch work ?
NOT 2021 NO ITS COMPATIBLE FOR T2 MACBOOKS 💻 ONLY 2018-2020 👍
Is there anyway to bypass the m1 macs nd thanks
M1 is not compatible for bypass on iCloud locked macs.
Dont know why but I tried it but can’t pay…it always says failed
You probably need to update the bridge OS 1st then it will work.
@@FOR-THE-RECORD-ICLOUD-HELPER got it, but the problem is I just can get macOS Catalina! When I want to make a second start volume with Ventura/Sonama it just installs till 8 minutes then it said Failed! I tried everything but nothing works! Is there any chance for an update?
Ok so you did update the bridge OS by restoring it through Apple Configurator correct.
can i use a mac with m1 chip to unlock a other t2 mac?
Yes you can problem is ATM the servers are down for the iCloud bypass for T2 MacBooks 💻 soon as there back up and working I will be sure to keep you informed 👍
@@FOR-THE-RECORD-ICLOUD-HELPER one more thing too if its wiped it keeps going to internet recovery is there a work around for that?
Yes internet recovery can fail multiple times on some occasions you can get it right the 1st time the 3rd time sometimes the 20th time the best thing to do is reset the NVRAM press power then command + option P + R @ the same time for 20 seconds.
Then start the internet recovery again using command option + R
It’s working go on checkm8 website and download the new version 3.0.1 👍
@@FOR-THE-RECORD-ICLOUD-HELPER is it a free service?
Is there a bypass for m1 silicon MacBook
NO
someone to help me my Macbook pro a2141 2019 doesn't go into PDU mode
DFU power shift option control exactly as I have done in my content.
It has been resolved, the new tool has been launched!! just update and perform the bypass.
Y haven’t checkm8 announced it yet your saying it’s working untethered I will need to check.
Friend, I tried to use your code but it didn't work...
Yes it does work ICLOUDHELPER029
The bypass for T2 MacBooks 💻 iCloud locked the server is currently down on them still waiting on a fix soon as checkm8 announces the fix I will update you.
@@FOR-THE-RECORD-ICLOUD-HELPER Check if an update hasn't come out for you... as I just performed the bypass, it was necessary to update the program to the new version.
Ok I will look into it now and thank you very much 👍💯
Confirmed 3.0.1 is the new download checkm8 probably haven’t announced it yet as there still over the moon 🌙 with the A12+ devices thank you for bringing this to my attention you deserve A ⭐️
👍💯
@@FOR-THE-RECORD-ICLOUD-HELPER great,
Does this work for the a2438 iMAC 2023 model?
No
For Catalina?
Catalina good bye 👋🏻 Sonoma welcome 👍
Work on M2 mac?
NO T2 only
@@FOR-THE-RECORD-ICLOUD-HELPER any process for M2?
Not for iCloud NO
hallo bro" after bypass, this can update from ventura to sonomo
Bypass it on Sonoma using command option + R
@@FOR-THE-RECORD-ICLOUD-HELPERbut can update or not
You can’t update OTA no
@@FOR-THE-RECORD-ICLOUD-HELPER ok thanks bro
@@FOR-THE-RECORD-ICLOUD-HELPER
sir" why always like this after finish instalation"
an error occurred installing macos. you can try again to complete the installation
With this work on iMacs
Untethered has been patched but tethered works on all MacBooks 💻 iMac 🖥️ Mac mini with the T2 chipset on sequoia as well here’s the latest video 1 week old 👍⬇️
th-cam.com/video/cvCfHW4Q_-0/w-d-xo.htmlsi=-yme6_TyGIvziAP0
How do you bypass iPhone 11 activation lock?
where does it say 'iphone'? pls switch on ur brain...😂
Macbook air 2020 retina
Model number?
@@FOR-THE-RECORD-ICLOUD-HELPERa2337
Que
support ibridge 9.0 ??
Currently working on that 👍