#25. 1978 El Camino SS. Bodywork on front end. Fender damage. Decals and bed tie downs on the 82.
ฝัง
- เผยแพร่เมื่อ 28 พ.ย. 2023
- In this video I take off front bumper and spoiler and repair damaged fenders as well as some hail damage. I put on SS decals and some bed tie downs on the 1982.
Hyperlite LED hexagon light:
Website - 6% off Promo code: CCUYTHY5
bit.ly/3Nf9SDG
Amazon 5% off (Promo Code: CCUYTHY5 )
amzn.to/3Q9XIxA
1/2 socket set:
www.amazon.com/VEVOR-10-24mm-...
/ clunkers-and-classics-...
/ clunkers_and_classics
clunkersandclassics@gmail.com
You can support the channel by buying a bumper sticker for $5. You can pay to my email address clunkersandclassics@gmail.com through Paypal.com.
If you would like to send parts or anything, you can send it here. Much appreciated:
Clunkers and Classics
PO Box 262
Mead, Oklahoma.
73449 - ยานยนต์และพาหนะ
I like that "BLACK AND BEAUTIFUL" EL CAMINO😊
Thanks
Looks great Northern calif 🇺🇲
The black El Camino looks great with the SS lettering 👍 I'm sure the white one will look just as good when your done. Keep up the awesome work and the cool videos ✌️🇺🇲
Thanks
That blk el'camino looks fantastic!! I kno its not easy work but boy oh boy its gotta be great owning that many nice cars,,enjoy!
Thanks
Decals look great!
Looking great Lee!
Thanks
the decals look great!
The silver stickers look alright on black , makes it pop 👍
The black car is looking sharp ! The decals blend in well enough nobody will notice. Glad it was just a heat shield rattling on the truck. I thought it sounded like one on video. Carry on ! lol
The black one looks great
Thanks
This amazing can’t wait to see how the 78 looks after paint because the 82 is clean nice transformation
decal look real good
Nice work as always. I love the cats. :)
Thanks
Looks great Lee!
Thanks
Hey . First time commenting on any utube videos. Been watching your videos for a while now. Probably for about a year. Love your videos and your work. I love love love the 68 nomad! !!! My first car was a 69 Chevy Concours wagon. Same car . Wish I kept it now. Anyway I just wanted to tell you about a ramp trick I use. I was watching your video on the 78 Elcamino when you said you have to jack it up to put the ramps under it because it hits. I use a 3 foot piece of a 2x6 on each ramp. Place them about half way up. Make sure they are even then I just drive right up as I normally would. Way easier and saves a bunch of time! Tell Niki I said hey girl! Good dog!👍👍👍
Hey Lee. Love the channel and your work. Especially the 68 Nomad Wagon. My first car was a 69 Chevy Concours wagon. Same car! Also I’ve been following your videos on the 78 and 82 elcaminos. Black one looks great!! You said you have to Jack up the 78 to out the ramps under it because the front end hits. No you don’t! I use a 3 foot piece of 2x6 . Place it about 1/2 way up each ramp . Make sure they are even on both sides and drive right up as normal. Saves a lot of time and is much easier. Hope it helps! Tell Nikki I said hey Good girl!👍👍
The decals look like they match pretty good,looks great! Will be a nice driver!
Thanks
Decals look good. Nice start on the white ones’ body work. New lenses will look good on it.
Thanks
Very exciting ❤ keep up the great work
Thanks
Looks good man looks really good you did a great job man props to you man
hi lee the 2 elcaminos are both coming along great that black color is awesome on the black can't wait to see the ss painted happy holidays to you and nikky
Thanks
The black car looks great, I do love the idea of a matte finish on the hood. That usually looks sharp. Love your channel sir, the absolute budget channel for us working stiffs. I've got a 79 Camaro that I'm going to start working on in the spring and you helped tremendously with knowledge.
Thanks
Nice paint job… my 73 Nova could use your expertise on my quarters, but I know this isn’t an option😂😂❤✊🏾
Looks damn good Lee! Need to go down the road jamming JP SCREAMING FOR VENGEANCE in it! 🤘
You bet!
Boy that hail is deadly in Oklahoma huh. I see a lot of that there! No wonder you had car ports put in for your cars. Good investment 😉✌
it's rare but can happen anytime
A lot of work, but it's worth it in the end! Thanks for bringing us along, Lee! Keep up the great work on these builds! I look forward to the next video!
Thanks
Yeah you actually get a lot done in a video man cuz it takes time to video and work it looks good man you did a good job on the body work you did a good job. Bro prompts to you
Thanks
❤nice work ❤
Thanks
Big thanks for al the info about the carburator,i have a1981 elco and also black,the engine code is302/350 ,350 is heads i think?the parts are not easily available,i have to order by Amazon,i have seen al your elco movies,keep the good work up!greetings from holland
The decals look great on the ‘82. I’m looking forward to seeing the hood scoop get molded into the hood. You said the temperature by you is around 60 degrees, well I’m from the Chicago area and man it’s been in around 10 degrees here for the last few days. As always, I like how you work and explain things.👍
63 today
Hey Lee. Love watching your videos. You do great work. Been following all the Elcamino videos. You said you have to Jack up the 78 to put the ramps under it. I use a 3 foot piece of a 2x6 on each ramp. Place it about 1/2 way up the ramps. Then drive the car up like normal. Been doing that for years. Works great and saves time and less work.
Decals look great on the 1982 El Camino great job on the body work on the SS El Camino 1978 and tie downs
Thanks
The white one is gonna look great also. Can't wait👍💯great job Lee.
Thanks
Top job Lee 👍
Thanks
Looking great Lee That Black one turned out good with the decals added Sharp truck it turned out to be
Thanks
That car looks great! Too bad about the "crazing" on the hood. Too bad you can't sand the hood down to bare metal, and spray it again. Good video man, sweet car!
Awesome!!! 🔩🔧🔩🔧🔩🔧🔩🔧🔩🔧🔨🔧🔩🔧🔩
It still looks great 👍💯
Thanks
Lee what about painting some rally stripes on the black El Camino hood? Red would look good.
As far as Harbor Freight did they get rid of the inside track club?
I know they also ask your phone to make sure you are receiving coupons.
I registered an online account. You can get all the coupons and make and save shopping lists
Inside track club uses no card anymore, just phone number
On the bed tide downs you you may be able to reach under between the out side and the inside of yhe bed
And not need such a big hole
Looks like a reaction (fry up). Previous coats attacking each other.
happened on first coat
Try boat cleats for bed tie downs
May could find a hood locally for malibue wagon or 2 door malibue and i think the 4 door malibue maybe the same. The two door malibue is a popular drag car and normally steel hoods come off anyway and replaced with fiberglass hoods. So maynot be that hard to find. Just a thought
none locally plus finding an undamaged used hood would be impossible.
Lee you need to do customer work body and paint. You are no frelez straight to it not trying to pull the wool over the eyes. Decent quality paint job. Seems fast aslo
I don't want to do customer work
@@clunkersandclassics I understand you said that before just need that type of paint and body guy that's fair and honest
Hey did u use pneumatic tool oil in that sander? That's prob wats sprayed on hood!
no, it's electric
looks good Lee glad to hear your molding in the scoop could you advise me on spot putty versus glazing putty wtf is the difference?
The difference is if it has a hardener or not 2 part or 1 part. The 2 part is a touch stronger and can fill small dings and heavier scratches. 1 part spot putty is for very light scratches and very small chips and imperfections like right before you paint and your all masked up and degreasing and you find a tiny chip or scratch. Then the spot putty 1 part is better to use. 😉✌
I like to use USC's Icing with the pink writing on it in a quart tube. That's all ya need but of course there's 100 brands to choose from. 🤦♂️😉✌
thank you so much@@michaelbristol6467
@@michaelbristol6467 Thank you sir I use their filler 17000 and love it you can actually sand still three days later lol 😂 will order the pink qt of glaze awesome 👏
No problem boss, it's good stuff sands like a dream! 26006 is the part # for it. I've been using it for over 20 years now.😉
I sold a choo a choo customs el Camino for$2000 in a package deal with another el Camino for parts. Sorry I don't have it now!
My choo choo customs car was pink
I'm not criticizing, I'm a fan of your channel. I notice you have a lot of orange peel in your paint jobs. Can I suggest when you repaint the hood turning the gun down to 25 psi and do %75 over laps. I tried that recently and shocked how much better my jobs came out.
Why do you always put SS stickers on your cars? The cars look awesome with or without them.
I like them
Looks like you tore down the dogs pen hopefully she’s okay didn’t see her this video
it's not torn down
@@clunkersandclassics O ok must have been the angle didn’t see the wire around carport cars are looking good thanks for the videos very informative
4. 15. Estate. For derec t. Wether. Is. Or. Not. I. Seen. A. Video. Agy. Paint ed. A. Rust y. Frame. And then. He. Statd. Ripped. Of. O. This. Staff. Dasnt. Work. He did. Not. Paint. It. Or. Nothing
Hey Lee. Love the channel and your work. Especially the 68 Nomad Wagon. My first car was a 69 Chevy Concours wagon. Same car! Also I’ve been following your videos on the 78 and 82 elcaminos. Black one looks great!! You said you have to Jack up the 78 to out the ramps under it because the front end hits. No you don’t! I use a 3 foot piece of 2x6 . Place it about 1/2 way up each ramp . Make sure they are even on both sides and drive right up as normal. Saves a lot of time and is much easier. Hope it helps! Tell Nikki I said hey Good girl!👍👍
Hey Lee. Love the channel and your work. Especially the 68 Nomad Wagon. My first car was a 69 Chevy Concours wagon. Same car! Also I’ve been following your videos on the 78 and 82 elcaminos. Black one looks great!! You said you have to Jack up the 78 to out the ramps under it because the front end hits. No you don’t! I use a 3 foot piece of 2x6 . Place it about 1/2 way up each ramp . Make sure they are even on both sides and drive right up as normal. Saves a lot of time and is much easier. Hope it helps! Tell Nikki I said hey Good girl!👍👍