The momentum continues..applying the windshield, taillights, and steering 👏
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- It's another productive day here at Hiltz Auto Co... Doug is applying the windshield with screws (very nerve-wracking) while Bad Chad modifies a set of 1948 Pontiac tail lights to fit. Meanwhile, Nathan is working on the steering 👏
If you enjoyed watching ⬇️
subscribe, leave a comment and hit the like button
/ badchad
Purchase merchandise here ⬇️
www.hiltzautoc...
Follow us on social media ⬇️
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
Mailing address ⬇️
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
Contact us ⬇️
support.hiltzautoco@icloud.com
#badchad #ford #custom #paintprep #paintingcar #painting #suspension #lowered #fender #roofchop #barnfind #hotrods #customcars #carshow #hotrodcruise #hotrods #cars #classiccars #badchadcustoms #rustrepair #car #carshow #hotrod #hotrodsandmusclecars #trucks #automobilerepairshops #rust #rustmobile #wheels #antiquecars
Thank you so much Chad, Jolene, Doug and Nate we really love and appreciate the content and the visual educational aspect of everything. God Bless y'all 😊
I really like that you are making a Rod out of what you have. You don't have to build a show car everytime. This is a car anyone could build. We all have our build quality standards and can choose what level to build. This looks fun!.
Great work Hiltz Crew the car is coming right along.
Diggin' the tail lights. I think Nate is in the right direction on the steering knuckle.
Those 49 or 50 Poncho tail lights are in more hot rods than any other tail light. They always work.
I'm loving the look of this car
good job guys
Making progress-its staring to look great
great progress
You certainly don’t need to make it the way I like it, I’ll watch regardless. But I think it’d be pretty sweet if you’d make a beauty ring to go around the windsheild that hides the screws and wraps around the edge of the lexan. Then match it to the cars patina. Done right most folks would never notice it’s screwed on. Just a suggestion though. Keep doin it how you like it!
Rip some angle iron lengthwise so it’s more like an “L” with the small lip just big enough to cover the lexan edge and butt up against the car. Radius the outside corner all around and make a trim ring out of that. Weld a few threaded studs to the inside of that, which would pass through a few seam-sealed holes with a nut on the inside of the car. Or put a gasket around that too.
What happened to the update cardboard on the wall you should give us a price update on what's invested
@Roy007-xvx those parts will be used on other projects and if you have ever built a project you would know that.
@@joescully566 dont bother with Roy, he is a troll. he tries to lure you in to reply, and jumps to calling you a hater or something else. he is an old man laid up in some dumpy flat somewhere in some crap neighborhood in England.
The comment Chad made at the end of the video needs to be paid attention to by some. You don’t like this, would have done that etc… He is building a race car from what he’s got sitting around the yard and shop. For the progress made and what’s been done it’s looking great.
When are you planning on finishing the buggati. it has been a long time.
Once again, Jolene is the one who sets the scheduling in the shop and what is going to be worked on !!!!! so if you got a problem with it, talk to Jolene not Chad !!! Jolene knows what good content is and what keeps the money rolling in….. go play in the road !!!!
Hey does Chad ever comment back to anyone? I’ve made lots of comments to his videos and never once heard a peep
That Bugatti will never get done not in Jolene’s lifetime she isn’t a top priority.
@@dougpeak7591 he does to me !!
Great job all
You should get a old beer keg for a gas tank it really looks nice.
Awesome man.
looks good!
👍
Like The Way the tail lights look
So you have all kinds of car parts in your yard. Why didn’t you take a radiator hose barb off a radiator in your yard of parts and install/ solder on your top tank so the flathead radiator hoses could be installed the stock way. You always preach about using what you have instead of spending money. Well the copper pipe and fittings cost you money and if you would have taken a part from your yard of parts it would’ve cost you nothing.
I agree...that would take commen sense
You don’t know what he has laying around in his door yard !
Everyone besides Jolene has sat in the driver's seat. OK.
I like how yesterday, the Great Bad Chad was trying to get Doug to make precision shavings down to a hair. Then today we get to the holes and they are drilled willy-nilly making it look like a true amateur, half-ass effort and result. Cheap doesn't have to look cheap, but it does here. The Great Bad Chad has standards to live up to!!!
Give it a chance man, just wait until it's done, instead of getting anxious on what it's going to be or not be! If he's not happy with it then, he will do what he wants!
THANKS FOR ANOTHER GREAT VIDEO
Can't wait to see it running
The car is looking outstanding Chad and Jolene 👍👍
Awesome, Thanks
This build is awesome!
It is a unique build considered what the car body is and based off other cars I've seen. It is very original for the type of car and the mods seem to fit well.
the cool factor is coming up pretty fast.
JOLENE Y'all are doing and awesome job. Thank you so much for sharing your videos with all of us. I am from the U.S.A and I love watching y'all build the cars. So thank you so much.
Can you put the bottom of the grill back on underneath the bar
I spend way more time watching your build, and not nearly enough time working on my own. The profile of the chop is spot-on. And thank you for not calling your build a "Rat Rod". I hate that term, and most of the cars identified as such. This is just a good ole-fashioned hot rod, made from whatcha got layin' around.
Nicely done chop on the top
Have to cut some safety glass for a windshield, use the plastic for a template maybe or just toss in the trash
I like the wheel .
With Doug and Nate working together, they've lowered the steering wheel down enough so not to interfere with Jolene's line of sight
GREAT TEAMS CHAD, NATE. DOUG
Gonna look cool on track
Dose look cool with the window bolted in just with the screws. Steel plate as a washer would look good to more industrial like a dunk tank. Looks good thanks for coming back today everyone at hiltz.
great work
Just like Macdonald 's iam loving it !
It’s coming together nicely. Yay drill press!
I like listening to you all as much as the work you guys do... and of course the stars of the show Jolene and Fina, make the show even more spectacular.
Comments sometime are a bit on the rough side, but we all show each night to have some fun and learn something. Thanks for providing decent family quality videos, shows are more enjoyable to watch when the sound is left on. 😀
Just need a fuel cell in the truck. Even an old propane tank with seal the deal. Bad Chad's got it all figured out. Like the old style air filter.
Looks like screws on a deep diving helmet from the 30s ..
Steampunk-style
Everyone s humidity in this show stronge , that’s what I like about this channel as well
Hey Chad and Jolene how are you doing today my friend so I love watching our TH-cam videos they are very educational videos and keep up the good work and and I think that Jolene is doing a great job on the Camara
Love this channel, watch every day! Nate is a mastermind!
the third hole below the trunk lid, make that the license plate light.
Chad and crew, you should have covered the plexiglass with vinyl decal transfer tape to keep it a lot clearer and it removes cleaner than masking tape would
Aussie 101 hello mates
Let tha Chad create !!!!
That window😢 IS really shit glass flat windows very cheap
This hot rod is not for street driving, just for the track!
Hi all from Trois-Rivieres Quebec
The windshield really shows of there craftsmanship !!!
That is an upside down steering wheel from a Model T Ford.
Great work guys and gal
Sad, sorry windshield. I sure hope Ms. Jolene takes over and sets a higher standard. As usual Sir Nate’s contributions are super FINE !
I have enjoyed this build the most. Nice hot rod, good team effort. !!
Chad and Jolene , Things are getting closer to completion of the 1934 Dodge Hot Rod Coupe. It's like the Old Johnny Cash Song building the old Cadillac one piece at a time. From available parts you have in the shop and the storage buildings. The grille is a Chevy the Engine is a flathead Ford , the driver's is out of a MGZ , the tail lights are out of 1948 Pontiac. The steering column and steering wheel look like there out of an old 1920's /30's Ford truck.. Nate will resurrect the steering column and knuckle installation. i appreciate Chad's comment that once Doug is done with his part with windshield that he'll go around the perimeter with seam sealer. Once the interior is completed It'll need to be cleaned up to meet Jolene's standards. Or she could invest in a light weight coveralls to match he racing helmet.
Plexiglass being drilled and screwed into is dicey!
Awesome, Work Everyone the Car is looking amazing .love watching it come to life it's looking amazing guys Great hard work.
I agree I was so looking forward to the look of the window and then this and Doug has all the heads crooked unfortunately
Very nice that steering wheel, it looks old.
Great job guys 😎👍
Thanks
Howdy everyone
I think you are doing a great job, Chad, and your working buddy. Thanks for the video 😊
Nice 👍
You should make this a daily driver Chad.
THE WINDSHIELD WILL GROW 1/4 IN in THE SUN LIGHT ???????
I for one can appreciate how Yous can keep costs down. Now days just a handful of hardware can be costly. Nicely done ✅
Love the show again.And a great video Jolene.😊
Definitely needs some white wall cookie cutter wheels my opinion
I absolutely love this build, actually it might be one of my favorite !!! I would love to have this parked in my yard 🙂↔️🙂↔️🙂↔️
Needed to paint a 1” lip around the glass black and used silicone. Would have looked better and not leaked water or air
LOOKIN GOOD
Windshield looks rough, messy screw placement and self tappers look bad. Should be flat heads. Needs a cover trim piece now to cover the wavy mess. 😮
Once Doug finishes, if it winds up with bends or waviness, I'm sure it will be resolved so that it's flat!
@@jessasto947 the man said he never in his life did a windshield, I think he did ok. I will bet all that are criticizing him. have never done it. so the screws are crooked big deal.. such simple things send some here into a tail spin and they never recover. its actually sad
you guys Rock
It is Joene caR. Get her approval. Custom fit the car to Jolene`s desires and needs.
You guys are Cooler Than Dang It!
Chad, this is one of the best builds you've done. So it deserves to be finished high end in my opinion, sorry but this is only mock up in my opinion and it deserves to be built to the show standards that we see.❤❤❤❤❤ Joe
I American graffiti build but your own spin or genesis aka the new teamwork makes the dream work
Fuel cap out of the quarter panel so its visible. I'm sure theres something laying around to use for that bad chad has a good collection.
👌
Chad just bad chad chrome around the tail lights
Enjoy your weekend! @Chad&Co
Won't be long now, for the 34 to be done, the steering wheel looks cool
You should gasket or seal those rear taillights to keep water out of the trunk.
Very entertaining! Shad needs a work table.
Never seen that being done
Spray WD40 when drilling holes through plexiglass. It will prevent the bit from loading up in the holes and the holes will be perfect
told ya , ART ROD, and a darn good one, great job boyz!
😊😊😊😊
👍👍👍
Would look great with the hilts logo
In patina on doors
There doing all the work
Enjoy your everyday shares on this build good job everybody.
Keep it up
That gearchange is ideally located for a blue eye
Team Hiltz, nice work everyone like a well oiled machine! Before we all know it will be done and race ready!
Doug sure likes screwing around..😂😂😂😂😂 looks like a lot of fun though.
Cheese Burger time! 🍺🍔🐕
This is hotrodding at its best...its basically for racing people just saying...looks badass...doug...kills me....vrooom...Doug promoting..they do need a doug shirt...I heard chad say gashole...I was laughing thinking..what did he call doug...haaaa...love this car..not sure why some people are hating..rock on guys!!!!!
I like the windshield it turned out great.