ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
It has a DOOR! // Antec P10C Review
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- It also has a sensible approach to the fully sealed front panel design, and a 5.25" bay... maybe this is the way to cut down the video length. Ah well, watch if you want, skip when you want, and stop when you can't take it anymore. Good luck!
Amazon Associate Links (I earn through qualifying purchases):
amzn.to/3GTqUFR
Support AV Techy on Patreon! - / avtechy
Other components used in this video:
Case - Antec P10C
CPU - Intel i7-6700K (1.28V, 4.50GHz)
CPU Cooler - Scythe Mugen 5
Motherboard - ASRock Z270M Pro4 (mATX)
PSU - SilverStone Strider Gold S Series (750W)
GPU - EVGA GTX 1070 FTW (2000MHz)
RAM - 2x 4GB G.Skill Ripjaws 4 DDR4 (3000MHz)
Fan Controller - NZXT Grid+ V3
Chapters:
00:00 - Start
00:48 - Overview
08:47 - Power Supply Unit (PSU)
10:21 - Drives
11:27 - Motherboard and CPU Cooler
12:09 - Graphics Card
12:48 - Cable Management
13:11 - Parts Box and Manual
14:22 - Testing Setups and Caveats
15:45 - Included Fan Hub Performance
18:11 - Thermal Performance Analysis
21:59 - Score Analysis
22:55 - Final Score
23:27 - Price and Price vs Performance
23:53 - Conclusion
Tags:
antec, antec pc, antec pc case, antec p10, antec p10 flux, p10 flux, antec p10 flux pc build, tech,gaming pc build, computer, pc gaming, silent pc build, how to build a pc, gaming pc, antec flux case, silent computer, silent case, best airflow cases 2022, pc build guide, antec p10c case, antec p10c, p10c, antec p10c review, antec performance series, antec performance, silent pc
Regarding the vents on the side panel being removed on the P10C, I believe the idea here is to help maintain positive pressure. I would prefer the P10C over the P10Flux as the P10C prevents leakage of pressure out of the side panel. Its better that pressure is maintained so that air escapes out the back of the case after it has had a chance to cool PC components. Air escaping from the PSU area is a waste of the air pushed into the case by the front case fans. Note also that in the P10Flux even the additon of the PSU shroud fan would not be sufficient to prevent loss of pressure. In the P10C it is still worth installing the PSU shroud fan as it will prevent loss of pressure out of the bottom of the case if your PSU is shorter than its dust filter.
I bought this case myself it's one of the very few good cases that comes with an optical drive bay, which I still use regularly for burning and ripping discs, and I didn't want to have to resort to an external device.
what do you think of the case?
@@morgogs I'd recommend it, I don't really have any complaints. Obviously the stylimg is very conservative as it's basically just a black box but I don't like gamer style products with loads of LEDs etc. Included fans are good quality and not noisy. I run the fans at the slowest speed on the built in controller and don't have any overheating problems with Ryzen 5600x and Rx 6700
Took a while, but I think you put out an amazing piece of content with this one.
Thanks very much man, there was a lot of procrastinating required for this one, but once that was out of the way it came along nicely :D
Nice case, reminds me a bit of Coolermaster's silencio silent cases-which never really where! An a-door-ably short video ;-)
5:00
I think I need a gif of this.. or maybe even a new notification tone 😂
wow you put a lot of effort in making this video
Acoustic foam lining does more for absorbing the resonance of the case itself than the sound of the fans. Some thin mental cases just sound tinny. Adding acoustic foam helps absorb these resonant vibrations. Also 5.25 bays are great for adding hard drive hot swap bays.
I Came back for another good laugh 14:15 😂
Good content as always. Thank you for your effort.
Thanks for sticking with me. It know it's a long and arduous journey :D
@@AVTechy I'm just hoping someday Antec will return as top case manufacturer. Their 2000s cases were mind blowing!
behind the door i see the old corsair SPEC-02 case
Not a bad case. It can actually be silent with better fans and the opening in the Flux version should provide better GPU cooling like it does in cases with a similar gimmick.
Yeah, not terrible like many "silent" cases can be. The Flux would be the one to go for though I think, there's not much reason not to.
12:11 Whole backside is budget. That stupid rib will scratch and bump into everything. There is a reason higher end cases have the whole section set back and the screws on the inside of the case.
2:19 Cut out the fangrill = cut out the noise. At least it's a decent distance removed the fan or the noise would be worse. Either way, who needs a grill on the outside on the rear anyway? Cut, cut cut.
I just got a P10C delivered and I'm disappointed. Out of the box the case is rattling. The side doors are loose. One screw is missing. The threads are low quality. This is not acceptable, particularly for the price.
4:54 Antec website says *"Front Door: Sound-dampening foam with 0.5 mm steel panel for absorbing energy"*
The majority of that panel is plastic, including the brushed effect to the front. It's definitely not brushed steel. It's been a while since I've been hands on with the case, so there may well be a sheet of steel to its core.
That doesn't mean the steel panel is on the outside.
yes i got this far :)
So could thecooling and noise reduction be improved by replacing 3 of the 4 the fans with PWM type?
It seems to me the dust filters are too course?
Hi, I bought this case and set up by myself. Does it included buzzer? I didn't hear any beep at booting. Not sure if my installation is right.
I don't think it came with a motherboard speaker. You'll have to check the accessories box part of the video to be sure.
Motherboard speakers aren't necessary, but can be helpful when diagnosing faults. You can buy them online for next to nothing if you feel you'd prefer one.
@@AVTechy Right. It is helpful while I am trying to overclock. Thank you.
How thick is the used steel anyway?
Why on earth is there a full steel honeycomb behind the front fans? Just to make more noise? WHY?
Eh, it makes the chassis more rigid and prevents cables from hitting the fans. But I agree, get rid of it and open up the airflow.
@@AVTechy
The rigidity issue is self-inflicted by using 0.5 mm steel.
There is already an inherent audible warning when cables hit the fans.
@jcvjcvjcvjcv I get what you mean, but there's more to it than that. We can talk about returns, recesses, extrusions, bracing, you name it. There's an economic and weight issue to adding thicker steel, not to mention higher manufacturing and tooling costs if thicker steel or more returns are implemented.
It's just not as simple as use thicker steel. For all we know there was a resource access issue when this thing was being manufactured... Which there was. Some materials were more scarce or just not available, or more expensive. It might have been value engineered down to this solution for all we know (there were massive shifts in many industries due to material shortages around this time, and there still are).
It's not safe to assume the answer is just about the thickness of the steel, and the call being made to do such a thing being ill informed or poor judgement.
@@AVTechy Nah, it's just a budget frame (with 0.5mm steel) masquerading around like a high-end case with foam, USB-C, etc.
Note that Antec also doesn't list the steel thickness in the specsheet of the P10C, but they do list the 0.8mm steel for the P101
I would be happy to pay significantly more to get the same case with a decent frame, but alas... the choice in modern cases WITH 5.25" slot is pretty much ZERO.
This is a removable dust filter. You can take it off if you prefer.
SSD's stored in narrow space on the right, where they hardly get any cooling?
F.uck that.