How to Replace Brake Rotors 2008-2012 Honda Accord

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1APB...
This video shows you how to install brake rotors on your 2008-2012 Honda Accord. Brake rotors may need to be replaced if they are warped or grooved. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• Impact Screwdriver 1aau.to/ox/1AXA...
• Phillips Head Screwdriver 1aau.to/opX/1AX...
• 10mm Socket 1aau.to/onq/1AX...
• 12mm Socket 1aau.to/opS/1AX...
• 17mm Socket 1aau.to/opS/1AX...
• 19mm Socket 1aau.to/ogU/1AX...
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/op/1AXA...
• Brake Caliper Hanger 1aau.to/oaa/1AX...
• 1/4 Inch Ratchet 1aau.to/onq/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/opS/1AX...
• Torque Wrench 1aau.to/ojt/1AX...
• Gloves 1aau.to/obG/1AX...
• Safety Glasses 1aau.to/oa7/1AX...
Subscribe: / @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: • Honda Accord 2008-12 8...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@m02rgan]

very important step is to grease the slide pins, on any brake job it should be done

[@Yakamatsup]

Lots of videos on TH-cam that don’t use the bleeder valve. On my 2011 Accord, the piston rotates and turns. So using a tool like this won’t work. Bent a borrowed and bought C-clamps, bought a tools from Advance Auto that didn’t work and finally and rented a tool from Autozone that was amazing. Save yourself some pain and rent the tool for free. $60 deposit required.

[@theniceneighbor]

Watching this....god I love being in the south.

[@overling1]

looks like your missing the springs. i see the pads have the holes for them

[@tyeson246]

I’m sure whoever’s car that was loved that you didnt replace the bleed valve screw 😂

[@castercamber]

Decent instructional, thanks for posting.

[@jjspatel]

After installing new rotors, is it mandatory to do wheel alignment and wheel balancing ?

[@jjspatel]

Do these drag reduction clips necessary or retainer clips function same way?? what difference it can make on mileage if you don't install drag red. clips?

[@motorized2105]

good vid. why did we not show rear?

[@a-fox]

Looks like you started on one car and finished on another.

[@Ske3849qw]

Yankee vehicle completely rusted out by northern weather. 😂😂😂