Can you Show me how to renove the Front Mask? I will Change the Upper Front mask fairing, But it seems is has hidden bolts inside? And 2 in the sides can u help?
Yes removing the whole front end of the bike requires quite a bit of bolt removal. I haven't shown a video on how to do it yet. I will be showing a video on that when we switch everything over to carbon fiber though
No problem, glad my video was able to help you out. If you wouldn't mind hitting the subscribe button that helps out tremendously and keeps me motivated. Either way I'm glad I was able to help you. If you need a custom tune made for your z900 or any other parts that we might have available please feel free to check out our website. We have a whole section just for the z900. If you need to get a hold of me in any way there is a email and phone number down at the bottom of our website. Here's the link have a great day. www.blrtuning.co/collections/kawasaki-z900-zr900-z900-abs-2018-2022
I plan on not getting headers for mine and I own an 08 Z750 not a 900. But if freaking sounds so good! it's so hard to judge sound on a video while looking at exhaust options for a motorcycle, lol.
They were just some cheap ones on Amazon and eventually they peeled up on their own anyway so ended up taking them off. We actually ended up having the wheels powder coated blue later on.
I was just going by the instructions from Leo Vince. So I actually don't know how significant that is for those on the right way. I would assume they want them on that way for a reason.
Sorry I guess your previous question I had misunderstood what you're asking. You don't have to fabricate your own exhaust hanger. You can but you don't have to. It will hang from the factory rear peg setup. I got rid of the rear pegs so I made my own exhaust hanger just something temporary to get me by.
Did you assemble the headers before installing on the engine or did you put the pipes on the engine then install the link pipes to the slip-on? I found that the fit wasn't 100%. If I put the headers together first the connections to the engine weren't clean but if I put the pipes on first the stupid mid pipe wouldn't line up with the hole under the bike.
It was something that someone had fitted to this bike before we got it. We got the bike used it only had 500 miles on it whoever had it before just made something work. It looked like they used a piece of fence post to make that exhaust work. It was just a slip on and they cut the cat and use the mid pipe from a different bike..
@@BLRTUNING oh, that makes sense. I bought myself a '21 Z900 for my birthday recently and considering a couple of different exhaust options. So far I really like the sound of the Austin racing exhaust.
@@az_pit_viper4270 Austin Racing makes semi full exhausts, where you lose the breadbox but you keep the catalizator, so you gotta cut the pipe midway to fit the AR one. Not the best solution since you destroy original pipes.
DID you ever make a more permanent and good looking exhaust bracket for the z900? I wanna eliminate the passenger pegs but need a hanger
No, we actually ended up selling the bike and getting a ZH2
@@BLRTUNING that is a bummer, but i cannot blame one bit on that front!
Hey Bill!! Nice exhaust system. I bought only the slip on.. I’ll see how it goes but definitely planning on getting the whole Leo Vince system 🎉
Can you Show me how to renove the Front Mask? I will Change the Upper Front mask fairing, But it seems is has hidden bolts inside? And 2 in the sides can u help?
Yes removing the whole front end of the bike requires quite a bit of bolt removal. I haven't shown a video on how to do it yet. I will be showing a video on that when we switch everything over to carbon fiber though
Thanks for the video Bill, between this video and diagram in the box the install was pretty easy on my '22 z900
No problem, glad my video was able to help you out. If you wouldn't mind hitting the subscribe button that helps out tremendously and keeps me motivated. Either way I'm glad I was able to help you. If you need a custom tune made for your z900 or any other parts that we might have available please feel free to check out our website. We have a whole section just for the z900. If you need to get a hold of me in any way there is a email and phone number down at the bottom of our website. Here's the link have a great day.
www.blrtuning.co/collections/kawasaki-z900-zr900-z900-abs-2018-2022
I wish they would make an exhaust for the ryker.
Same
I plan on not getting headers for mine and I own an 08 Z750 not a 900. But if freaking sounds so good! it's so hard to judge sound on a video while looking at exhaust options for a motorcycle, lol.
These exhaust systems with the headers sound absolutely amazing
Where did you get your wheel stickers from?
They were just some cheap ones on Amazon and eventually they peeled up on their own anyway so ended up taking them off. We actually ended up having the wheels powder coated blue later on.
Hi, I have the same exhaust, can I remove the grid ?
I'm not sure exactly what you mean...
@@BLRTUNING At the end of the exhaust, there is a "honeycomb" thing, can I remove this
@Sawcisson yes
do the header flanges need to have to numbers facing the bike I noticed you said that just curious why? I may have installed mine the opposite way
I was just going by the instructions from Leo Vince. So I actually don't know how significant that is for those on the right way. I would assume they want them on that way for a reason.
So what was the deal with the fabricated hanger? Is it possible install and use without having the fabricated your own bracket?
You can fabricate your own
@@BLRTUNING is that necessary? Like out of the box it won't work without fabricating your own?
Sorry I guess your previous question I had misunderstood what you're asking. You don't have to fabricate your own exhaust hanger. You can but you don't have to. It will hang from the factory rear peg setup. I got rid of the rear pegs so I made my own exhaust hanger just something temporary to get me by.
@@BLRTUNING gotcha. Thank you for answering. Great video.
Did you assemble the headers before installing on the engine or did you put the pipes on the engine then install the link pipes to the slip-on? I found that the fit wasn't 100%. If I put the headers together first the connections to the engine weren't clean but if I put the pipes on first the stupid mid pipe wouldn't line up with the hole under the bike.
Was built on the bike
Was that Austin racing setup a slip on or full exhaust and did it fit loose because it was more of a universal setup?
It was something that someone had fitted to this bike before we got it. We got the bike used it only had 500 miles on it whoever had it before just made something work. It looked like they used a piece of fence post to make that exhaust work. It was just a slip on and they cut the cat and use the mid pipe from a different bike..
@@BLRTUNING oh, that makes sense. I bought myself a '21 Z900 for my birthday recently and considering a couple of different exhaust options. So far I really like the sound of the Austin racing exhaust.
@@BLRTUNING by the way was that originally an Austin cat delete exhaust or was it a slip on ?
@@az_pit_viper4270 Austin Racing makes semi full exhausts, where you lose the breadbox but you keep the catalizator, so you gotta cut the pipe midway to fit the AR one. Not the best solution since you destroy original pipes.
With db killer or without?
Without