Ideally, yes its good to move them equally. On this bow the bottom cam was set way right while the top cam was pretty centered. So just moving the bottom cam to the left centered both cams up which helped our tune in this case. But Yes, its good to move both equally when starting from center! Good question and thanks for watching!!
My CP30 was knock right on bare shaft tuning so I moved my cams to the left to move the knock left. My bow is shooting better than I could imagine. Why move the knock the same way as the tear? I see it worked for you but I’m confused. Thanks
I have several things. That bow is tuned to you. Did the customer have the same results? You fixed 1st and 2nd axis. Are you going to do 3rd with the customer at full draw? Doesn't Bowtech manual say move both cams equally?
Yes, our customer results have been proven time and time again. There are times with bad form etc we have to tweak more upon the pick up if the bow. We always fix the third axis on all bows at full draw that pay for a Broadhead tune
thank you for being quick and understandable! your about to blow up on here
I love this bow. Just got it a couple months ago and im shooting lights out.
Awesome bowtech will probably be my next bow!
Good choice!
Awesome video! As always! Thanks For considering our request.
Any time!
Aren’t you supposed to move top and bottom cams equally?
Ideally, yes its good to move them equally. On this bow the bottom cam was set way right while the top cam was pretty centered. So just moving the bottom cam to the left centered both cams up which helped our tune in this case. But Yes, its good to move both equally when starting from center! Good question and thanks for watching!!
Absolutely
What were your measurements on center shot?
My CP30 was knock right on bare shaft tuning so I moved my cams to the left to move the knock left. My bow is shooting better than I could imagine. Why move the knock the same way as the tear? I see it worked for you but I’m confused. Thanks
I have a have a ss34, is serving separation only a problem with bowtech?
Not necessarily- I truly believe it has more to do with stock string sets. Just another reason to go with custom strings from GAS or ABB!
-GK
I have several things. That bow is tuned to you. Did the customer have the same results?
You fixed 1st and 2nd axis. Are you going to do 3rd with the customer at full draw?
Doesn't Bowtech manual say move both cams equally?
Yes, our customer results have been proven time and time again. There are times with bad form etc we have to tweak more upon the pick up if the bow.
We always fix the third axis on all bows at full draw that pay for a Broadhead tune
Can you do a pse levitate?
Great video , have a ss34. Do have serving separation in same spot. What strings do you recommend.
Americas best or GAS they both carry warranties
How hard is the new darton prelude 32 to tune
Very easy, it has yokes