ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Quick video of how to disable the anc (active noise cancelling system) in a 2013 honda accord, im doing this because it was interfering with my subwoofer/amp. what the anc does is that it listens to road/engine vibrations and sends the opposite wavelength signal out the speakers to quiet the road/engine noise by (deconstructive interference). so if your having a subwoofer interference when the doors are shut this is most likely your problem. so this is how to fix the subwoofer from feedback noise, buzzing, hitting randomly. comment like and share. also shows you "how to wire a subwoofer with a stock radio or headunit" also if you own a honda or an acura, and or even older models, the procedure should be similar( may not be exactly the same) when disabling the active noise canceling, easy way to disable active noise canceling DIY, without cutting wires, safe, cheap, convenient. how to remove anc mic's on 2013 honda accord. how to disable anc system by radio.
Follow my build on instagram - seungwoo_wrx no more Honda lol
Even though this video is like 8 years old i still can't thank you enough. I could not figure out what was going on because the feedback was i was getting was extremely weird. Thank you
Dude....you are the man! A week of re wiring, reading forums and beating my head against the wall and this solves my “feedback, low rumbling” issue. BTW the rear mic on a 2008 Honda accord is located under the rear deck by the speaker. It is under a little tiny hole.
My ohhhhhh MYYYYYYY, after a 10 hour install , the struggle was real !!!!!! I went and purchased a completely new sub, I changed my ground multiple times , until I ended up calling it a night . I did my research and landed on this video. I want to say thank you and you saved me from spending more money. I was really close to buying the aftermarket radio for my car . 💁🏾♂️😎
You can also just unplug the ANC module that is behind the glove box of most cars. Don't have to remove headliner etc and won't lose BT calling.
Dude , I wanna thank you, I went thru some of the things you described in this video, and I had no idea what was wrong, it got to the point where I just took all the equipment out, I just figured it was not meant to be, Thanks for your help, now I can go and re install my sound system
Thank you so much man! I just got a new system and I was so disappointed when the rumbling started happening. This helped me out tons!
thanks a lot man I just got a 2017 Honda Accord sport and I didn't know exactly what was wrong the guys at the audio place told me it was the anc but you just made it so simple and easy for me because these guys had know clue where it was located on this newer model
Just wanted to say thank you! My buddy and I just ran into this problem today in a 2014 Sport. We thought that the amp wasn't grounded properly at first. Your video saved us alot of headache.
Professional installer for year, I was pulling my hair out over this, so simple and so stupid! THANK YOU
haha no problem brotha, i was going crazy for a few weeks also.
Just an FYi, just hold 1 & 6 first then press the volume knob. No need to hold the display button. The Diag screen will pull up. After that press 1 to turn ANC on/off.
+3rdzodiac I can see the "ANC Off" but when I restart my car.. it seems to be ANC ON again. Anyway to fix this?
+Kenjiro Yagi it resets. as i stated in the video.
what about on a 2010 accord exl no navi?
The anc unit is behind the glove box. Take the glove box our and disconnect the harness and you keep your bluetooth mic.
Found this out way too late. Sub was making a buzzing noise constantly. Finally found out the problem today, but this is a great video you have shared.
i have the same problem thanks for the help bro....all fuc......ing day breaking my head searching for a solution
Thank you!!! The 1, 6, power works fine just for me . So far it has stayed too even when turning car on and off! I do have a 2014 Honda Accord though.. again , thanks bro!
omggggggg you saved my day the Vibration and Boom was coming through my subs with Radio off, i thought it was the Amp or Remote wire which i moved on opposite side, that was the issue
Thanskyou my friend
Just added my sub too my 15 accord and same problem. Thank you for making this video!!!
I GOT THE SAME ACCORD..I HOOK MY SYSTEM UP AND JUST CUT THE TAN WIRE AT THE (ANC) AND EVERYTHING WORK FINE.. EVEN MY MIC WORK.
Where was the 10 wire located that you could by the mic and if so which one the front one the first one
I was at best buy for multiple days and they could t figure this out until I saw your video. This was exactly the cause of the problem. Good job
yep, np glad it helped
absolutely loved it man, thank you from the bottom of my heart
not sure, but it will make your sub sound a whole hell alot better.
Yea that's true! I also have accord 2013. and the way bestbuy guy did it for me is through unplugging ANC cable which is right behind the dual climate area. you may have to open you console and unplug it. this way you won't lose you microphone!! I have also installed infiniti speakers in my car and it sounds great!
directly from Headsound, i connect a SOEM4 and then to the input Amp, y use two RCA "Y" for the Input Sub, so i didnt need the converter low/high anymore, the reason why i decided to change everything was because the sound was horrible, finally the sound is VERY GOOD, today i decided to test what happen if i reconnect the ANC,Im surprissed to see that Subw doesnt vibrate as the first time,so i decided to keep ANC connected,i hope still working good always. Im from mexico sorry 4my english
Thank You So Much. I work at a Honda Dealership and nobody could help me figure it out.
your welcome
+Jason Lee is there a way to keep your Bluetooth mic active after you unplug the mics
+Vanillah_Killah yeah cutting tan wire behind storage compartment.
Jason can you please help me I want to keep my mites connected but I also want to install a sub where is the town wire located in the storage compartment for me to cut it do you mean the glove box cuz I don't know what storage compartment get talkin about are you talkin about on top where the mic is the sunglasses holder
Thanks man Just what I needed because the feedback I was getting when I would start up my car was making me go crazy
your welcome!
your welcome!
FYI - you only need to hit 1/6/power, display button is not necessary (this may only be true in the ex, but that's what I do for mine)
As a LOC the LC2i runs circles around those passive LOCs.
Hi there I only disconnected the back microphone and That stop the noise thanks for the video
I tried your method, but its still making that noise. Do you know what else I can try? Im desperate for an answer.
thanks for the vid.
I had the exact same problem and another install guy that was there said he knew exactly what to do, what he did was run a longer RCA far away from the fuel pump and guess what it stopped doing it. He said that the fuel pump picks up interference from the fuel pump and now my woofer won’t make a sound until the radio is on and volume up. I didn’t have to mess with the ANC at all.
Original problem was when the doors were shut and I turned the car on the woofer would kick loud for no reason the radio could be at 0 volume
mine happening after i shut off the car i have to opene the door for it to stop
also there's a plug that you can reach by just popping off the panel near the passenger foot area and unplugging it from the anc box. takes 60 seconds and you don't have to do any of this nonsense
What tool do I need ??
Nick Scassera video
there is a guy on here that mentioned disconnecting the plug on the passenger side. i did it that way. pretty easy to get to if you have skinny hands. i have big hands and it was still able to unplug it.
Don't unplug the ANC by the glasses holder there's 5 wires 4 of then are thin colors are green pink purple white the fifth wire is the thickest its a tan or slightly darker white is u cut that one it disables the ANC but enables the bluetooth mic for hands free calling...still have to disconnect the rear ANC above the ceiling panel
THANK YOU.... I cut the wire as you explained and It worked!!!! no more crazy subwoofer making super weird noises.
I was not happy about loosing my handsfree... now I have both my stereo and my hands free... very important
No problem Jhonathan Rivera
Did u have to reset or do anything else? Cuz I did the same as explained and nothing...got rid of the noise but still cant use handsfree
rigolater5000 which wire did you cut and what year is your car
The thick beige one...and i have a 2015
they do, but the way i did its the most economical and convenient for me.
man i stayed up for hours trying to figure what was causing sub to hum. Close doors with car running and da shyt drove me crazy lol.. Appreciate the heads up.. Gonna see if they make a part that can bypass
way easier then other videos on this...thx
for sure.. i'm installing speakers, amp and sub tomorrow and will def. be using your method.
not really sure what your asking me. but ill try to answer you. after you disable the anc through the radio, it will automatically reset back to the factory setting when your ignitions completely off. and yes obviously you have to do it every time if you want the anc to be disabled. also the order you do it in doesn't matter, the car can be off and you can disable it, or vise versa. hope that helped.
Awsomeeee my bass was going nutsssssss
You save me some green $$$ thank you for making this video. Nice car man. Just bought 2014 honda accord sport myself
Thank you Sir. I've been trying everything, now I know what the hell to do!
i dont know if you know by now but you dont have to unplug the front or the rear mic on the car all you have to do is unplug the anc module by the ac controls i aleready did that on my 2016 honda accord sport
bro where is it located in have a 15 sport
Does any downside come from unplugging this stuff you guys talking bout?
not really but my only problem now is that every time i shut off the car i have to open the door where can i connect the fuse tap so the amp can shut off fast need help
Could you make a video showing how you installed the subwoofer and a clip of the sound? I am wanting to do this in my accord and want to know what i am about to be up against. :)
no i did not, speakers are still stock. i only have one 10" alpine type r so in an enclosed box so the bass isn't too dramatic, just the perfect amount to keep the quality of the music clean. if you upgrade to new speakers you should amplify them further too be super loud, if not its not a big deal.
Nice video but Frankensteining the sub forget that I just spliced & ran a rca wire from a rear speaker to a Sony powered sub boom BASS and using a small 110v inverter for power thanks for the microphone info that was driving me 🥜 🤣
no need to disable ANC if you have Head Unit hooked up to DSP such as Audison Bit One directly via harness?
My amp and sub is installed to the factory head unit. The power isn’t coming on. Can I get some help? I wired everything correct. But the ground wire is wired to the ground but there’s a plastic placement on top of the ground wire as it’s screwed into my meta car frame. For the remote wire, I used the illumination fuse in the fuse box running at 7 + 3.5 amp. I’m not sure which way is the correct way to fuse it. Please help.
OMG Thanks man, you the best!!!
Thanks bro shout out to my honda heads
So after you turn it off..you start the car or power off the radio to get back to normal display...and then you have to do this everytime you start the card??? Not sure if I turn it off and then start the car..is it on or off?? Thanks
are this cars good to buy? have you had any stereo audio problems or touch screen problems? have you had any vibrations from the passanger seat moving and vibrating? thank you
Nicely done! I'll bet you are quite good doing things with cars. What kind of music do you listen to with the sub? Dance music
lol yes it drove me crazy also, and yes, when you unplug your mics the bluetooth capabilities goes out the door. you can take the actual anc system out but i didn't want to take apart my new car.
Thank u Sir was going crazy science February when I bought it finally
Brian ponte - what are you talking about bro? I can't figure out what/where/this unit..that harness etc..can you be more clear on that pls? I don't want to disconnect the headliner mics because I'm NOT interested in creasing my headliner..I tried the shutoff scheme on the hd unit and it still does that loud hum. if you could be more specific that would be great. thanks man
What is your subwoofer making lots of bass noise when your stereo was off can you let me know please
Thank you very much for this, just got my system hooked up n this shit helped out so much
I'm not sure if my issue is related in any way but I just installed a line out converter on a 2015 Civic SI so that I can install an amp and subs. It's the type that has a power & ground wires that need to be connected in order for the blue remote wire to send signal to turn amp on. I wired them to the power on the amp and the ground on the amp. Everything sounds good until the car and stereo is turned off the sub pulsates loud for a few seconds then just stops. It's as if the amp doesn't shut off fast enough. I'm wondering maybe I got a crappy LOC and about to buy another. The amp is a Kenwood monoblock but I tried 2 other amps like Kicker and Memphis and still did it so I know it's not the amp. I appreciate any input on my situation. Oh and I used the 2 rear left and right speakers to connect the LOC. Is there a way to use the the stock subwoofer wiring instead? Thanks
Thank you so much brother 🔥good luck ✊🏻
Hello, I have a CRV 2018 TURBO PLUS, I have added an amplifier and when accelerating sounds ugly, can you tell me where I have to disconnect and at the same time what ANC module is for? what function does it have? or if it does not cancel guarantee, thank you very much t greetings from Mexico ...
thanks brother i fix my thanks to you 👍
Ok I. Having that problem so I need that small adapter on the back if your subwoofer? What is that called?
there is no dash kit for 2013 accord!. Also i would say if you want to get a better sound then change your speakers and put sub in there as well. If you plan to buy speakers then make sure you get around 50 watt rms power speakers. They will match with your headunit pretty well and then add infiniti tweeter in back . I had infinite speakers and it sounds great. I just have hard time with sub. ANC is giving me hard time. I might just disconnect mic .
ugh me too on 2016 sport.. but i didnt want to lose the voice calling. so finally the guy disconnected the back anc. and the front by the glasses holder. he cut one white wire whoops voice calling.... reattched the wire cut the other white wire... BANG ALL GOOD. it would haplen to be when i would acceleration for loke the first 5 min... now its gone.. bit todays is the 1st day afther the cut will see in a week
Bro good fucking lookin out I’ve been braking my damn head for a week tryna figure out how to get that feed back out of my life like holy fuck soon as I get the chance to doing it I’ll post another comment on my success
Hi. Nice setup. How did you run the positive wire to the sub. Do you have pictures or videos on that? Also where did you tap the remote wire as well?
I have a similar issue but on a 2015 accord sport sedan and I tried the 1,6, display & power and didn't do nothing. I also tried the 6 holding till says complete and still did it. I want to know if have any ideas
pros: it's works
cons: when using android auto and playing music with Google play music you can't search for songs by voice command anymore. is there a way to fix this? mayb just disconnecting the rear an? ?
does it only interfere when your doors and truck are closed? and also do you have the same model as mine? im aware that the premium package has a few faults in the radio. so that could be a manufacture issue.. but heres a few things to try, put a fuse in between the batter and the main power wire( closer to the battery) make sure you have at least an 8 gauge wire, check if your ground is solid. and run a diagnostic on your amp too see if its within spec, MAKE SURE YOUR GAIN ISN'T SET TOO HIGH.!
How do you like the stock speakers as is? Are they good quality? Thanks for the video
FYI, you can access the ANC from behind the radio without even removing the radio. The passenger side has a small panel under the dash by your left leg when sitting. Once you move that, you see a gray connector next to some gold connectors. Reach in, unplug it, and boom -- ANC unplugged. Easy cakes.
how can i do that on a 2010 exl no navi?
Thank you my ny homie!
Hi dude! In your opinion, with ANC active, is your Accord inpressively quiet? (referring to tyre/road noise), or is it just a tech thats not really effective?
In my opinion, there was no difference what so ever so I think it's just another thing to "advertise"
when you turn it off, would you be able to use the built in mic in the car to make phone call, meaning when you connect your phone to your car to make call, the mic in the car will not work or ?
depends which method you choose to do. if you unplug all the mics all together its obvious your built in phone will not work. if you do it through the radio like i showed then ur phone will work.
Bro ever since I disconnect this ANC I have a terrible “drone-ing” noise coming from the back of my car. Almost sounds like an exhaust leak or something but it’s not. I don’t know wtf to do it is driving my crazy. Once I open the door it goes away and the comes back again while I’m in Park.
Hey did you get any ignition problem after disconnecting mics?
I had a ignition problem when bestbuy guy unplug anc cable, which was behind dual climate.I went to dealer to fix it but they did not find any issues. so I realize may be its anc cable ,so i went back to bestbuy and get it plugged in again and ignition problem solved!! now i have no sub in my car.I m wondering may be disconnecting mic is better way to go. I just want to know if u had any issues after disconnecting mics?? thanks
Is their something like that in a Equinox radio as well
How to prevent the bass from kicking when turning off the Anc ?
Hi how do u play music on the iPod section instead of Bluetooth when I connect my phone and put it on iPod it says no data ?
Is there a way to display the length of a song on the screen?
hey i am having the same problem with my car, so whenever you unplug the microphones to disables will the turn off my bluetho ? My is having the same crazy noise whenever i turn on the car with the door close once i open it goes all also.
how did you install the aftermarket amp and sub?
I have a 2013 accord ex should be almost the same I hope.... Where did u get that converter and how much......
bought it on amazon for 35 bucks.
Hi
So I got a honda stepwagon rk5 2010 and installed a kenwood aftermarket radio unit, but I got a buzzing noise when accelerating and found out that I need to disable the ANC!
Anybody knows where to find it?
TIA
Great video, I had the same problem with my 2014 accord. Does your sub make that plastic on the back of the back seat rattle? I have that issue with mine and it's really annoying!
Javier Gomez I just got my subs today and I heard some weird rattling noise coming from the back that's probably wat that is, any ideas on a solution?
I couldn't really come up with anything to fix that issue, the only thing I do is to keep the bass setting to a moderate level that way it's not too annoying. It also depends on what type of music you listen to. For me only a few songs make it rattle a lot
I inserted a piece of foam between glass and light and fixed lol
does the second way work for a 2010 accord exl no navi?
Could you please tell me where did you get the sound for input to the New Amp. I have installed an Amp too (JBL JTO5355) and my Sub is 12" Pioneer Champion Series. First i take the sound from the output of the Factory Amp (My versión is EXL NAVY) i use a Low/High converter and conect to the input new Amp, the ANC was able and my Sub go crazy. Then i disconnect both ANC Mics and the problema dissapear. Last week i decided to change everything, i pull out the Headsound and take the sound directly
can you put a video of where the firewall hole is located.
Can please tell us how you removed the front mic cover
i used two small flat head screw drivers, and you use them to carefully pry out the edges of the mic housing.... be careful cause you can scratch the surrounding plastic. if your worried about scratching anything, use plastic wedge tools.
How did yuh connect it to the factory stereo can you list the parts n everything I would need to connect a amp n sub
You need a line out converter... and you splice the wires into factory speakers and the l.o.c picks up low frequency waves (bass)
Thanks bro
Dude you're the best. Thanks bro,
Thank you much appreciated
Hey so I disabled all the mics like you showed on your video and everything works great, but all of a sudden recently every time I turn off my car and opens the door to get out the noise from sub goes off like it would when I had mics connected. I'm not sure whats causing it. When I turn off the car sometimes I can hear the subwoofer making a low humming/buzzing sound and as soon as I open the door thats when it gets louder just as if the ANC was still connected. Have you ran into that issue?
no man, unfortunately i haven't run into that issue. after doing what i did i had no problems. that sounds like a amp issue, do you have a fuse in-between the battery and amp?
Have you ever figured out what was wrong @chanh? I'm having the same problem as you
yeah its most likley your active noise cancelling system thats making your subwoofer kick when you dont want it too. the bluetooth and phone making capabilities are no longer there, once you unplug the mic's.
What color is the remote key start to turn on amp please reply
Do you still have to disable anc if there is no factory sub channel? I'll have just an ex model with no sub but will be using a 6 channel LOC to change all speakers and add a sub. Will I still have to disable anc?
+Cameron Smith Yes, even without the factory sub, the stock stereo system still runs the low frequency (bass) through the rear 6x9's, and believe me, for stock speakers they hit (pump a lot of bass). I have a 2010 LX-S 4cyl auto coupe (all stock, no mods) and it has the ANC system. I tried Jason's method of the 1,6, Display (which "display in the 8th gen is actually the "menu" button) power. This button sequence is actually a sequence, not all at the same time (so not like keyboard short cuts), just quickly hit the buttons in this sequence and it works. Then your radio display will read out the "Diag V1.5" that's where you can do lots of stuff, but don't mess around other functions you are not familiar with, just stick to using the "#1" button used for disc1/radio preset 1, that is how to toggle through between on and off for the ANC, and yes, it will make the system "boom", which is basically a system self check test to indicate to the user (you) if it is functional. That is also how to test if you have a "good ground" for your subwoofers if you add aftermarket subs, because it should sound smooth, if it sounds distorted then you are having either grounding issues, or continuity issues, or system impedance of some sort which is best diagnosed by a professional car stereo shop. Sometimes it can help determine if there is a loose connection in the wiring, meaning sometimes people don't tighten things down correctly. Remember, bass rattles things loose, which means if your ground wire or other wires are not solidly secured, they could become loose and make the system sound shitty, all it takes is one loose wire/screw to make a system sound like garbage. On another note, disabling the ANC inadvertently affects the ASL (automatic sound leveling), so you may be annoyed that you have to actually manually turn the volume up when you go on the freeway since the ASL adjustments are relatively proportionately based, which in turn can make you think your stereo isn't working right (like "why is it (the stereo) quieter on the freeway now and harder to hear") when in reality it just isn't automatically turning the volume up and down for you. Hopefully that helps answer some of those weird issues that are hard to figure out if you don't know how the system works in full scope.
Just go to your settings and turn it off. So the noise cancel setting will be disabled.
you must not own an accord with a subwoofer, you have to do it everytime you get int your car because it resets.... GUY
Jason Lee so does this mean that if I get an ex model without a sub that I won't have to disable anc even if I add a 6 channel LOC to change all speakers and add a 5 channel plus a sub? Thanks
And how do you go back from diag Menu ?
there is not hole from the factory, you will have to drill one, i decided to do it behind the glove compartment, yeah you gotta take off the glove door for that.
SHIT! Just put a nice Stereo integrity shallow mount sub in my wifes car. Same noise problems.. but did you lose the MIC option for hands free calling?
Thanks man!