4:47 Andy, bit of a heads up on those magazines. There is a grub screw (1.5mm hex key) underneath, and what you need to do is tighten the phillips screw until the correct amount of pressure is on the face plate. Then from underneath, use the hex key and tighten the small grub screw and lock the phillips screw in place. Also the same allen key can be used to adjust the ball detent height below the clear cover.
Some 4 years on, and this tip of yours is spot on! I would never have thought to look for that 'tiny' grub screw underneath. This solves the problem nicely, Thank you!
I've said in a previous review Andy reminds me of one of the old Top gear presenters ( like the Quentin era ) . Very well presented and he reviews bearing in mind that a newbie could be a viewer. This is becoming my go to air rifle channel
I own this gun and its fun to use and quite powerful for target shooting at backyard but its most likely to increase your budget as you need yo buy Co2 cartridge which only shoots 30 pellets and so on always spend money on Co2... which is more expensive to own this budget air rifle
Love this Chan, grew up using Air Guns and as a Grandad no I am gonna be getting back into them but could you please state the price of the Guns, really don't no why you often don't, thank you.
I bought one of these because I'm suffering frozen shoulder as a result of of ICD unit being fitted in the right side of my chest .I can't cock my springers or hold them on target because of the weight . The CR600w is ideal for me as I don't need to exert to much pressure loading it or holding it on target as it is light .
Just bought the artemis version as a 10m starter gun for my kiddo. The length of pull is adult size though; the stock will have to lose a good 10-15cm for this 7 year old midget. Funny the little differences. Mine has a proper silencer that made me thing the co was depleted. It fits 3 co2 cartriges, not 2, but weardly the screw does not go in the last 10mm when installed. Same thing when using te supllied 2-cartridge-sized plastic spacer. I did take it apart and removed the dirty graese around the trigger, cleaned and oiled with proper gun lube, adjusted the trigger to the back a bit with the way too short screw (will probably buy a 1-2mm longer one). Found the trigger guard screw and the one holding the lug on the underbarrel to be very loose. The endcap screw needed anouther 360 as well. Still need to take it to the range and test it properly. It seems to shoot a little low at short distance with the back sight all the way down. Will fix that … got a cheap gamo scope for it as well, so no biggie. So it needed a little t.l.c. before real use. All in all, i feel like I just scammed someone. What a lovely little thing for this bit of money! I keep taking it out of the bag like a little kid , in disbelief.
Strikingly smiler to the Artemis PR900 gen1/2 and that you've already made a nice review which i think im gonna have one. Though this CO2 thing seems to be more accurate. Thank you gentlemen! Pakistan
I'd say the reason it looks like a PCP rifle, is because it's essentially a CO2 version of the PR900W. Indeed, I wouldn't be at all surprised, if they're made on the same production line.
Please use and don't forget ( PEL GUN OIL with every use ) on Co2 guns, i think it's most important with Co2 air guns , it will help prolong a healthy life span and prolonged satisfying performance,
Stuck between this one and the single shot one, this seems more convenient with the magazine but I think I prefer the power of the single shot to make sure of a clean kill for rats even at garden ranges.
I have the same gun! I love it, a scope needs 11mm rail mounts to fit on it, certainly easy to find actually. If you want to know what scope I have on just reply!
Hi Andy I have had two cr600w and have had problems with both rifles with the c02 sticking and also not puncturing correctly do you have any advice on what I might be doing wrong ? as the second is now on its way back after being repaired by the manufacturer and don't want to have to go through the process again thank you.
basicily like my diana trailscout expect the scout uses 3 bottles all same time for 200 shots , they should have made it to use both bottles at once would be more praticial
Your more likely to lose that Alan key than you would a co2 capsule.Although the rabbit stopper is a single shot . I'd rather have have that than this rifle , It's more Ft Lb , Thanks for the review
The .22 version is more efficient and it's very simple to raise the power a bit more with a couple of easy mods so that it's at least on a par with the Crosman & beyond. I much prefer these.
@@kneejerkreactionuk If this is anything like the cp1 and the 2260 is anything like the 2240 or 2250 then I'd rather get this and mod it for more power if it's needed. 2240 and 2250 have shocking build quality and have to spend a load of money to get them any good with their plastic breech. Cp1 was excellent for the price.
Depending how similar the internals are to the CP1/CP2, I bet the aftermarket hammer springs would fit, perhaps with a bit of snipping/adjusting. If I could have one of these doing 20 shots per capsule at or around 10.5ft/lb, I'd be pretty happy for what little money it costs. I've recently been down the very deep and expensive rabbit hole of Crosman modding, and while I'm happy with the end result, if I were to spend that money again I would spend it on something else and save myself the ballache!
The window is to let you see that there's a cartridge in there more than to lever it out by, but there's a good stripdown guide on yt, I'll link in a moment.
Sigh... and yet ANOTHER gun to add to my collection. This hobby is getting expensive. Still cheaper than photography though. Thanks for the recap. It's very informative much like all of your reviews.
Hi andy i know this videos been on your channel for a while now so i'm not sure if you will see this but i wanted to let you jut incase you didn't that there is in fact a pcp version of this gun which is called the pr900w i think it would be a great gun for you to review its accurate and powerful at around 12fpe , it is also sold by Diana in an FAC version which in .177 gets to around 23fpe under the name of the stormrider but it is the same rifle its just the FAC version i made for different regions which have no restrictions its an awesome PCP so if you get a chance to review either version i think it would be a great video for your channel.
The magazine is not working for me. I can only shoot the first shot, but the next shot doesn't automatically load. What am I doing wrong. I pull the bolt back after the first shot.
I have the Artemis m30, very similar mag I fumbled with the silly thing for ages the instruction manual is utterly useless until I saw Andy load one on the m30 review, now it’s easy, I can load them without thinking about it whilst having a conversation with others down the range
I have one smk not the co2 cartridge. The one you have to fill a chamber... I thought all air riffles was the same power? Because I need one for long range and thought all air riffles are the same.
Very nice and interesting video, well done! (But, please, next time use a pen, not a knife… - I know you’re probably not violent, but it doesn’t with what you want to show).
4:47 Andy, bit of a heads up on those magazines. There is a grub screw (1.5mm hex key) underneath, and what you need to do is tighten the phillips screw until the correct amount of pressure is on the face plate. Then from underneath, use the hex key and tighten the small grub screw and lock the phillips screw in place. Also the same allen key can be used to adjust the ball detent height below the clear cover.
Some 4 years on, and this tip of yours is spot on! I would never have thought to look for that 'tiny' grub screw underneath. This solves the problem nicely, Thank you!
Clear diction, no adultmovie-esque soundtrack. Good grief, what's wrong with this man !! Excellent review.
I've said in a previous review Andy reminds me of one of the old Top gear presenters ( like the Quentin era ) . Very well presented and he reviews bearing in mind that a newbie could be a viewer. This is becoming my go to air rifle channel
So glad you're back.
Great reviews
Many thanks for them
Thank you Mike. Regards Andy.
AAR OnAir Andy’s Airgun Reviews
Thank you for all your hard work and great reviews
This is exactly what i was looking for
Thanks for the review, very informative. I think this is gonna be my first rifle.
I like your reviews. Good videos. Watching from Dallas, Texas
You can use the Grub Screw, but if you lose it you can use 2 thin Copper Washers, it allows you to tighten it up & still be able to move.
Also suitable for over 70's like me who need a light recoilless rifle ok i've found for bell target.
I own this gun and its fun to use and quite powerful for target shooting at backyard but its most likely to increase your budget as you need yo buy Co2 cartridge which only shoots 30 pellets and so on always spend money on Co2... which is more expensive to own this budget air rifle
Thanks Andy 👍
good to see you back😁😁😁😁
Thank you Tom. Regards Andy.
Love this Chan, grew up using Air Guns and as a Grandad no I am gonna be getting back into them but could you please state the price of the Guns, really don't no why you often don't, thank you.
I bought one of these because I'm suffering frozen shoulder as a result of of ICD unit being fitted in the right side of my chest .I can't cock my springers or hold them on target because of the weight .
The CR600w is ideal for me as I don't need to exert to much pressure loading it or holding it on target as it is light .
Andy, re: the screw becoming loose on the magazine. Maybe some liquid threadlock, it's like a weakened glue, could be a solution.
Just bought the artemis version as a 10m starter gun for my kiddo.
The length of pull is adult size though; the stock will have to lose a good 10-15cm for this 7 year old midget.
Funny the little differences. Mine has a proper silencer that made me thing the co was depleted.
It fits 3 co2 cartriges, not 2, but weardly the screw does not go in the last 10mm when installed.
Same thing when using te supllied 2-cartridge-sized plastic spacer.
I did take it apart and removed the dirty graese around the trigger, cleaned and oiled with proper gun lube, adjusted the trigger to the back a bit with the way too short screw (will probably buy a 1-2mm longer one).
Found the trigger guard screw and the one holding the lug on the underbarrel to be very loose.
The endcap screw needed anouther 360 as well.
Still need to take it to the range and test it properly. It seems to shoot a little low at short distance with the back sight all the way down.
Will fix that … got a cheap gamo scope for it as well, so no biggie.
So it needed a little t.l.c. before real use.
All in all, i feel like I just scammed someone. What a lovely little thing for this bit of money!
I keep taking it out of the bag like a little kid , in disbelief.
Strikingly smiler to the Artemis PR900 gen1/2 and that you've already made a nice review which i think im gonna have one. Though this CO2 thing seems to be more accurate. Thank you gentlemen!
Pakistan
Thanks for the vid always good and easy to understand your rewiew
Looks like My diana stormrider 😀 Merry Christmas 2 you
I'd say the reason it looks like a PCP rifle, is because it's essentially a CO2 version of the PR900W.
Indeed, I wouldn't be at all surprised, if they're made on the same production line.
This gun reminds me of my diana chaser but missing a few little features
I suspect this is an updated version of the good old XS78/QB78.
Please use and don't forget ( PEL GUN OIL with every use ) on Co2 guns, i think it's most important with Co2 air guns , it will help prolong a healthy life span and prolonged satisfying performance,
it takes 3 co2 cartridges, not 2...
I modded mine. It does 11.7 ft lbs. With a good shot count of around 20.
How did you mod it bud what did you have to do ?
Is it useful for hunting hare? distance?
Enjoy the video and don’t forget to visit www.vector-air.co.uk and www.aar-OnAir.com see you next week. Follow us on facebook.com/andyairgunreviews
Stuck between this one and the single shot one, this seems more convenient with the magazine but I think I prefer the power of the single shot to make sure of a clean kill for rats even at garden ranges.
Thanks for all you do and I'm curious how many shots per co2
35
2:36 he says it there.
Hiya just wondering what mm the rails are on this gun and what scope you have on this please Andy
I have the same gun! I love it, a scope needs 11mm rail mounts to fit on it, certainly easy to find actually. If you want to know what scope I have on just reply!
Nice review AAR! Curious does any company have any similar to this but for the USA market?
Ona trailscout and 20 others probably
Hi Andy I have had two cr600w and have had problems with both rifles with the c02 sticking and also not puncturing correctly do you have any advice on what I might be doing wrong ? as the second is now on its way back after being repaired by the manufacturer and don't want to have to go through the process again thank you.
basicily like my diana trailscout expect the scout uses 3 bottles all same time for 200 shots , they should have made it to use both bottles at once would be more praticial
Is the trailscout any good, thinking of getting one ☺
@@kevinwalker8082 i have both the .177 and the .22 cal now and they are both outstanding
I put 2 empties in with 1 full.👍🏽👍🏽
Very good. This is a Artemis CR 600W CO2? Is necessaire Scope Angel? Energy in Joule?
CO2 Recuo zero igual PCP não precisa nada na luneta não tem tranco da mola.
10 Joules, mas calcular Joule pra luneta não serve em armas a gás ou de fogo pois não tem o recuo duplo da mola da carabina que danifica muito mais.
Hi Love the reviews, just wondered what one you would pick , the cr600w or the rabbit destroyer?
🐰
Can I own this with out a license? (Uk)
Your more likely to lose that Alan key than you would a co2 capsule.Although the rabbit stopper is a single shot . I'd rather have have that than this rifle , It's more Ft Lb , Thanks for the review
The .22 version is more efficient and it's very simple to raise the power a bit more with a couple of easy mods so that it's at least on a par with the Crosman & beyond. I much prefer these.
@@kneejerkreactionuk If this is anything like the cp1 and the 2260 is anything like the 2240 or 2250 then I'd rather get this and mod it for more power if it's needed. 2240 and 2250 have shocking build quality and have to spend a load of money to get them any good with their plastic breech. Cp1 was excellent for the price.
Depending how similar the internals are to the CP1/CP2, I bet the aftermarket hammer springs would fit, perhaps with a bit of snipping/adjusting. If I could have one of these doing 20 shots per capsule at or around 10.5ft/lb, I'd be pretty happy for what little money it costs.
I've recently been down the very deep and expensive rabbit hole of Crosman modding, and while I'm happy with the end result, if I were to spend that money again I would spend it on something else and save myself the ballache!
How do i take the moderator off the pr900w please
Het w do I remove a stuck co2 cartridge?
There's a hole up nearer where you load the pellets in the co2 tube for this reason.
The window is to let you see that there's a cartridge in there more than to lever it out by, but there's a good stripdown guide on yt, I'll link in a moment.
Old Navajo Tricks well it seems not
@@Louis-lu5wh What, video not there or hasn't helped?
Old Navajo Tricks not there 😂
It's CO2. If you used a heavy pellet you'd have seen closer to 12ft lbs.
It's good air rifle on rats(small game), to 25meters?
its basically a permanent rifle version of the smk cp2. So, yes i would think so, although a crosman 2250, modded to 12ftlbs would do better
it's pretty good for pest control
It can actually kill at 50m if you're a good shot but recommended is 40 meters maximum.
@@Moe572 Thanks!
How would you mod this I'm looking to kill rabbit and want definite killing power and would it work if I used the .22 7 shot one aswell
Why do modern co2 pellet rifles have to be so heavy and long. Shoot a Crosman 180 and see what I mean.
Looks identical to my PR900 but with co2 instead of pcp ,
Name scope?
Is this much different to the SMK ARTEMIS pr900w? WOULD LOVE A REVEIW ☆☆☆☆☆
That one is a pcp which needs an air pump to charge. Same gun though
Sigh... and yet ANOTHER gun to add to my collection. This hobby is getting expensive. Still cheaper than photography though. Thanks for the recap. It's very informative much like all of your reviews.
Guy's XS501, QB78 or CR600W, all serve my purpose but I can only afford One.
Do you or anyone know where I can find a co2 bulk-fill-adapter for this rifle? I've looked everywhere online so far with no luck at all...
Hi andy i know this videos been on your channel for a while now so i'm not sure if you will see this but i wanted to let you jut incase you didn't that there is in fact a pcp version of this gun which is called the pr900w i think it would be a great gun for you to review its accurate and powerful at around 12fpe , it is also sold by Diana in an FAC version which in .177 gets to around 23fpe under the name of the stormrider but it is the same rifle its just the FAC version i made for different regions which have no restrictions its an awesome PCP so if you get a chance to review either version i think it would be a great video for your channel.
The magazine is not working for me. I can only shoot the first shot, but the next shot doesn't automatically load. What am I doing wrong. I pull the bolt back after the first shot.
@@handlesarefeckinstupid Thanks!
I have the Artemis m30, very similar mag I fumbled with the silly thing for ages the instruction manual is utterly useless until I saw Andy load one on the m30 review, now it’s easy, I can load them without thinking about it whilst having a conversation with others down the range
I have one smk not the co2 cartridge. The one you have to fill a chamber... I thought all air riffles was the same power? Because I need one for long range and thought all air riffles are the same.
condesending ...little gun ...starter gun . mine is tuned and puts a full mag under a penny at 40 yards and knocks over rabbits at that distance too.
@antimatter314 there are a few mods, Google "air cheif rapid repeater" and you will find lots of people modding them, mostly from new Zealand.
How i will purchase this gun? Give details.
Where can I buy in U.S.A?
Look for Artemis cr600
@@leee2593 damn my dude that one hell of a profile pic
Is this gun avialable in odisha of india ? Give datails with price.
Very nice and interesting video, well done! (But, please, next time use a pen, not a knife… - I know you’re probably not violent, but it doesn’t with what you want to show).
Mas que Barbaridade
Man I'm an end up ordering an airgun across the ocean
Now I know who made Seneca Dragonfly MK2😂😂😂😂😂😂