Thank you so much......this is what I need to do very soon in my work place......connecting two different CPUs running in two different networks & accessing both from my Service PC......
Oh my god... that last tip, where you said changing the IP address requires first time downloading to be done directly. This one issue might have probably caused me hours of issues already in my first few months on PLC programming ! I mean, I have lost a lot of days trying to find the cause of this error more than once. Thank you.
@@hegamurl7434 i have a question: Is there a way to use a PLC as a gateway between two subnetwork generally, not just for TIA? For ex, i have a 2PN 1500 with a LAN for devices and a second LAN for an IPC traceability system. Can I connect to a device on the first LAN from the second one through the PLC as a gateway/router?
Is it possible to disable routing in order to improve security and isolation between subnets? Will routing work for non Tia Portal or non S7-Connection traffic ?
hi, you are really doing great. Could you make a video on How to Remote access (configuration)of Siemens PLC(s7-1500),HMI(comfort panels) using Suitable Siemens product??? Please.....
17:54 We can not download to PLC 2, because IP adress has been changed. What should we do in this situation? Delete PL_PLC_Network and make it one more time? Then it should work again, right? Thank you for another avesome video!
Great explanation, thank you for the information. Do you know how could I download the same project at once to multiple PLC in the same network? Thank you
I want to do something simillar but with PLC and hmi. I have pc connected to one port of PLC and hmi is connected to The second but i cannot find The hmi through PLC. When i'm choosing "Connection to interface/subnet" between PN/IE_1 and 2, nothing is showing on "1st gateway"... What am I doing wrong?
thanks for the valuable video and, i have one question: i have 2xS7-1215C and 1x KTP700..... the 1215C also has 2 Ethernet ports but the hardware in TIA shows actually only X1. and in topology view there are 2 ports and in network view there is one port, does that mean that both ports has the same addresses?….it is a little bit confusing thanks in advance
This Routing only works for SIEMENS Components? I mean, if Ihave a Modbus TCP device that I need to communicate with a PLC in a connection like the second PLC in your exaple, can I define the first PLC as a default gateway?
In this example, suppose the HMI is connected to Profibus port of PLC 2, still is it possible to communicate PC(Connected to PLC 1) with HMI(Connected to PLC 2) ?
First, thank you for the tutorials! brand new to Siemens Simatic manager, and TIA portal. I have run across an interesting problem. SFC14. The LADDR input is W#16#nnn . what does the W# and the 16# stand for? Where is it getting the information to record it into the ouput? Thanks in advance, and keep these coming. they have been the most helpful and easy to understand tutorials I have seen.
Few correction. If yor network mask is 192.168.0.0/23 it covers IP addresses from 192.168.0.0 to 192.168.1.255. You need to add subnet mask on your diagrams because its fundamental part of routing, switching and subnetting. To be honest, I would never use such complex network. Having switch makes your life much more easier when all devices are in same network. Connecting management server or PC directly to other host (or PLC) is from 1980s. Even this solution works, I do not recommend it. Have been playing with Valmet, ABB and Honeywell systems
A question : what if you download the changed IP address configuration to the second PLC first and then download to the first PLC ? Would that work to be able to change the IP address via PLC routing ?
Thank you, but i have one question,i am using S7-300 Plc (PN/DP) and ET200S which uses PROFIBUS, and IFM module which uses ETHERNET,when i download from my PC i use ethernet,but my PROFIBUS module says UNREACHABLE,how can i solve this?
Thanksa lot! And how can I remotely get to a PLC by using Tia Portal? There is an Ewon connected to the PLC. From Tia Portal I am having troubles to find the decive through the VPN. is there any especial setting? ( I can PING properly the PLC though) Regards!
Thank you very much hegamurl. I'm just wondering if it possible to change the IP address for PLC_1 and PC so it matches the PLC_2 IP address for exemple 192.168.1.3 for PLC_1 and 192.168.1.4 for the PC.
Hello Hegamurl, ich have following configuration in my plant: PLC 1513F-1 PN combined with a network card CP1543-1. On the network from the PLC is connected a TP700 Panel. Access to the PLC is over the network from the CP. The network from the PLC and TP700 is a 192.168.X.X. The network from the CP is an 172.18.X.X. All Ethernet-Plugs configured to a Subnet. The Ethernet on the PLC is called "Processbus" and the Subnet from the CP (PG-Interface) called "Systembus". I can acess the PLC over the "Systembus" with no problems. But how can i download the software in my panel over the Systembus to the Processbus ?? Is this possible ? Thanks for your effort :-)
Hi! I want to make a connection between a Phoenix AXC 1050 PLC and WinCC Professional Scada. So I downloaded the GSD-File from the phoenix and added it in Tia Portal. But the Phoenix PLC is connected with a ethernet cable to a modem (with M2M Internet SD-Card). Which (HMI?)connection could I use. I do also want to use OPC UA as protocol but I am not sure how to ':). Last question, if this above could work. Should I use IP Adress of the modem or the PLC. Hope you can help me! Joost
I have a simple network, a PLC, a Comfort panel and a servo drive where each is connected to a Ethernet switch. I can ping each device individually from my latop (where it is also connected to the Ethernet switch). Having said that, I created a network by dragging PLC port to HMI and then to the servo drive. I can't get online with either HMI or the servo drive. Assigning name (update list in dialup screen) returns 0 device found. I can not figure out why TIA can not detect devices.
thanks i enjoy you video. QUESTION: is it possible to make a connection between wincc profesional and et200s, noting that the two are on difference IP range, but both share a S7 1500PLC
hi thx for everything please tell how can I Ritch my encoder connected to plc1 by profibus interface from another plc connected by profinet like you done with HMI but from my user program not from pc
Hi, Excellent simple explanation. Thanks. One question, if the Profibus HMI was connected to PLC_2 , any method to access it via routing through PLC_1?
Huh, ist the routing only available for downloading to hardware? Because every time I plan a robot cell I have to put the HMIs into the warehouse-network-layer just for the sake of reaching it (and watching it via smartserver) with VPN. Great videos by the way, weiter so ^^
Would this still work if you had a CP1543 card attached to the PLC and you would try to connect to the HMI? I am trying to make it work with this method, but i can only simulate the HMI but not download
Hi, could you make a video of network configuration in tia portal when you have multiple PLCs and and HMIs using a switch (any other switch than what can be found in siemens' repertory? Thank you in advance.
Great video. Thank you for the content that you provide. I was wondering if you could help me regarding communication between CPU's via routing. My 2 CPU are not connected on the same network but there is a VPN linking them 2. Is it possible to make them exchange ?
Hi, can I do this process but connecting 2 virtual PLC's with PLC SIM?? I do nota have the posibility if buying a PLC so I want yo practice virtually..... Thankyou!
Hi Martin, with the normal version of "PLCSIM" it is not possible to do so. The version "PLCSIM Advanced" can be used for testing networking/hardware. I have never tested it... but I think there might be a free workaround with the standard version of "PLCSIM" using an additional tool called "NetToPLCSim". Link here: sourceforge.net/projects/nettoplcsim/files/latest/download
Great. Well, does anybody visit forum today?) It is important to rise up forum members, I think. Because almost all forums that I know are close to death. (Of course Siemens Industry support is immoral)
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Thank you. This is something new even for many advanced TIA users.
I hope you start making TIA videos again. You’re the best channel I have yet to find!
Always put a million likes on your tutorial before watching, it's always useful & skillful
Thank you!
thanks hegamurl. i hope you share more about TIA PORTAL topics
Thank you so much......this is what I need to do very soon in my work place......connecting two different CPUs running in two different networks & accessing both from my Service PC......
Happy I could help!
Spot on and its easy to enter the IP directly on a 1500 Screen, to get you going
I absolutely appreciate everything you put on here. Thanks for sharing your knowledge.
Oh my god... that last tip, where you said changing the IP address requires first time downloading to be done directly. This one issue might have probably caused me hours of issues already in my first few months on PLC programming !
I mean, I have lost a lot of days trying to find the cause of this error more than once.
Thank you.
Excellent!! It's so simple and so, so handy in a real plant.. Thank you!!
Hi Hegamurl! Your tips are the best! I'm really appreciate it 😊!
Great video like always. Looking forward to seeing more videos related with industrial communications.
Thank you so much! Siemens support said this wasn't possible!!
Perfect video!
I really would appreciate a series about OSI and network!
Cant wait to try this with router module!.Great video
thank you
we need you to explain
Modbus tcp/ip
modbus rs485
in tia
we really need it bro
Thanks really informative video
Did you activate "Use router" in the properties of the X2 port?
Great video, just what I needed.
Thank you!
You are very welcome!
@@hegamurl7434 i have a question:
Is there a way to use a PLC as a gateway between two subnetwork generally, not just for TIA?
For ex, i have a 2PN 1500 with a LAN for devices and a second LAN for an IPC traceability system.
Can I connect to a device on the first LAN from the second one through the PLC as a gateway/router?
Thank You!!! Great explanation! Very helpful for learning!
Danke für Ihre Mühe 🙏🙏🙏
Always some good advices Philip ;-)
Hegamurl is a maister !!!
Thank you for sharing this. It was very useful
Cool! Glad it helped!
It was very helpful
You're the best
Is it possible to disable routing in order to improve security and isolation between subnets? Will routing work for non Tia Portal or non S7-Connection traffic ?
Дякую за цінну інформацію! ))
hi, you are really doing great. Could you make a video on How to Remote access (configuration)of Siemens PLC(s7-1500),HMI(comfort panels) using Suitable Siemens product??? Please.....
17:54 We can not download to PLC 2, because IP adress has been changed. What should we do in this situation? Delete PL_PLC_Network and make it one more time? Then it should work again, right? Thank you for another avesome video!
Hello Hegamurl
I am struggling to connect two S7 400 CPU and one HMI TP1900 comfort panel. S7 400 CPUs are in different subnets
Great explanation, thank you for the information. Do you know how could I download the same project at once to multiple PLC in the same network?
Thank you
I want to do something simillar but with PLC and hmi. I have pc connected to one port of PLC and hmi is connected to The second but i cannot find The hmi through PLC. When i'm choosing "Connection to interface/subnet" between PN/IE_1 and 2, nothing is showing on "1st gateway"... What am I doing wrong?
thanks for the valuable video and, i have one question:
i have 2xS7-1215C and 1x KTP700..... the 1215C also has 2 Ethernet ports but the hardware in TIA shows actually only X1. and in topology view there are 2 ports and in network view there is one port, does that mean that both ports has the same addresses?….it is a little bit confusing
thanks in advance
FYI, this ports act like a switch, they share the same IP address.
Could you also cover the indirect addressing in TIA? Thanks in advance
Thank you it's really useful topic
This Routing only works for SIEMENS Components? I mean, if Ihave a Modbus TCP device that I need to communicate with a PLC in a connection like the second PLC in your exaple, can I define the first PLC as a default gateway?
Great video. Thanks for your work.
👏👏👏👏👏👏👏👏👏 Congratulation. Well explained
Very cool video!
Hi Hegamurl,
Do yu think make videos abaut WinCC V16 lectures(especially scripts vs.)
Thanks my friend for this video
Hello sir, if my PLC IP address is 192.168.0.7, Can I communicate with modbus TCP/IP 192.168.1.7?
Thank you very much for your explanation.
In this example, suppose the HMI is connected to Profibus port of PLC 2, still is it possible to communicate PC(Connected to PLC 1) with HMI(Connected to PLC 2) ?
First, thank you for the tutorials! brand new to Siemens Simatic manager, and TIA portal. I have run across an interesting problem. SFC14. The LADDR input is W#16#nnn . what does the W# and the 16# stand for? Where is it getting the information to record it into the ouput?
Thanks in advance, and keep these coming. they have been the most helpful and easy to understand tutorials I have seen.
W stands for Word and 16 stands for number of bits (16 in case of word). So output is a 'word of 16 bits'. Word is a datatype.
Very interesting advice and tips.
Few correction. If yor network mask is 192.168.0.0/23 it covers IP addresses from 192.168.0.0 to 192.168.1.255. You need to add subnet mask on your diagrams because its fundamental part of routing, switching and subnetting. To be honest, I would never use such complex network. Having switch makes your life much more easier when all devices are in same network. Connecting management server or PC directly to other host (or PLC) is from 1980s. Even this solution works, I do not recommend it. Have been playing with Valmet, ABB and Honeywell systems
Hi brother!. I needle to connect to a remote plc s7-1200 from my office. What is the better way? And cheaper!. Thanks
A question : what if you download the changed IP address configuration to the second PLC first and then download to the first PLC ? Would that work to be able to change the IP address via PLC routing ?
Thank you, but i have one question,i am using S7-300 Plc (PN/DP) and ET200S which uses PROFIBUS, and IFM module which uses ETHERNET,when i download from my PC i use ethernet,but my PROFIBUS module says UNREACHABLE,how can i solve this?
Thanksa lot! And how can I remotely get to a PLC by using Tia Portal? There is an Ewon connected to the PLC. From Tia Portal I am having troubles to find the decive through the VPN. is there any especial setting? ( I can PING properly the PLC though) Regards!
Thank you very much hegamurl. I'm just wondering if it possible to change the IP address for PLC_1 and PC so it matches the PLC_2 IP address for exemple 192.168.1.3 for PLC_1 and 192.168.1.4 for the PC.
Hello Hegamurl, ich have following configuration in my plant: PLC 1513F-1 PN combined with a network card CP1543-1. On the network from the PLC is connected a TP700 Panel. Access to the PLC is over the network from the CP. The network from the PLC and TP700 is a 192.168.X.X. The network from the CP is an 172.18.X.X. All Ethernet-Plugs configured to a Subnet. The Ethernet on the PLC is called "Processbus" and the Subnet from the CP (PG-Interface) called "Systembus". I can acess the PLC over the "Systembus" with no problems. But how can i download the software in my panel over the Systembus to the Processbus ?? Is this possible ? Thanks for your effort :-)
Is it possible to show topology network status of plc in HMI screen? in Siemens
what is the CP communicatin processor to connect winccv7.5 (PC) to 100 RTU VIA PRIVATE APN TCP\IP
Gracias compa! eres lo maximo!
hello. how to add equipment library to tia portal for example cpu et-200 im- 155
Please make video on dprd an dpwr block used for profinet communication for drive
Hi!
I want to make a connection between a Phoenix AXC 1050 PLC and WinCC Professional Scada. So I downloaded the GSD-File from the phoenix and added it in Tia Portal. But the Phoenix PLC is connected with a ethernet cable to a modem (with M2M Internet SD-Card). Which (HMI?)connection could I use. I do also want to use OPC UA as protocol but I am not sure how to ':).
Last question, if this above could work. Should I use IP Adress of the modem or the PLC.
Hope you can help me!
Joost
I have a simple network, a PLC, a Comfort panel and a servo drive where each is connected to a Ethernet switch. I can ping each device individually from my latop (where it is also connected to the Ethernet switch). Having said that, I created a network by dragging PLC port to HMI and then to the servo drive. I can't get online with either HMI or the servo drive. Assigning name (update list in dialup screen) returns 0 device found. I can not figure out why TIA can not detect devices.
thanks i enjoy you video. QUESTION: is it possible to make a connection between wincc profesional and et200s, noting that the two are on difference IP range, but both share a S7 1500PLC
Can you tell how to communicate a profinet device with two PLC both PLCs are in different pn/ie
Ok we can connect & upload program to pc but how we can upload HMI program connected profibus. Sorry I can't get it. Please explain.
Whata topic I loved good job
Great video...
Awesome, I've never known it's possible
hi thx for everything
please tell how can I Ritch my encoder connected to plc1 by profibus interface from another plc connected by profinet
like you done with HMI
but from my user program
not from pc
Hi, Excellent simple explanation. Thanks. One question, if the Profibus HMI was connected to PLC_2 , any method to access it via routing through PLC_1?
Pretty much the same way... but have not tried it, so no guarantee😅
So... what about the subnet mask?
Hi can you Please Configuration of SCALANCE W788-1 RR and SCALANCE W 747-1 RR. Thankyou
Please make video on multi-project
Huh, ist the routing only available for downloading to hardware? Because every time I plan a robot cell I have to put the HMIs into the warehouse-network-layer just for the sake of reaching it (and watching it via smartserver) with VPN.
Great videos by the way, weiter so ^^
Would this still work if you had a CP1543 card attached to the PLC and you would try to connect to the HMI? I am trying to make it work with this method, but i can only simulate the HMI but not download
hi mr plc
thank you for this video .
If i want to connect my PC to PLC and Internet at the same time (in case i do not have wireless adapter on my PC), what do i need to do?
Thank you, Have good health`
Hi, could you make a video of network configuration in tia portal when you have multiple PLCs and and HMIs using a switch (any other switch than what can be found in siemens' repertory? Thank you in advance.
Hi can i put the two profinet interface for plc1 on the same subnet. Second how to manually configure the IP address for plc2
Great video. Thank you for the content that you provide. I was wondering if you could help me regarding communication between CPU's via routing. My 2 CPU are not connected on the same network but there is a VPN linking them 2. Is it possible to make them exchange ?
Hi how can I use web navigator via internet without public IP???
How to make multi project in TIA Portal
Thanks, useful video
and, how add smart panel 700ie to Tia portal?
Profinet > Profibus
Thank you Very Much !!! :)
Good job, thanks
Thanks you so much
Great job! Please may u reveal ethernet connection!
Hi, can I do this process but connecting 2 virtual PLC's with PLC SIM?? I do nota have the posibility if buying a PLC so I want yo practice virtually.....
Thankyou!
Hi Martin, with the normal version of "PLCSIM" it is not possible to do so. The version "PLCSIM Advanced" can be used for testing networking/hardware.
I have never tested it... but I think there might be a free workaround with the standard version of "PLCSIM" using an additional tool called "NetToPLCSim".
Link here: sourceforge.net/projects/nettoplcsim/files/latest/download
@@hegamurl7434 thankyou very much. I Will try it....
Profibus ihm doesn't work?
Danke
hey man i swear i love u , u help me so much
please can u help us with MQTT in tia portal and how it send ti ibm cloud
Great. Well, does anybody visit forum today?) It is important to rise up forum members, I think. Because almost all forums that I know are close to death. (Of course Siemens Industry support is immoral)
Let me know how to buy you 🍺, ☕ or a 🍕❗❗
Great info thanks
Thank u very much
thank you master ;)