Supmix 62 cc Chainsaw (20 inch Bar) - Set up and my initial thoughts of the saw up at the cabin

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 พ.ย. 2024

ความคิดเห็น • 22

  • @gerardbrownrigg3498
    @gerardbrownrigg3498 8 หลายเดือนก่อน +2

    I have the supmix 62 cc
    Been using it now for over a year only on very large trees
    It is loud. But it is the fastest and most powerful 62 cc that I have ever seen.
    But, it is a gas guzzler. Very hard on gas.

    • @scottnoiles8131
      @scottnoiles8131  8 หลายเดือนก่อน

      Good to hear! I agree, it's a loud one. Take care, Scott

  • @marcuscicero9587
    @marcuscicero9587 9 หลายเดือนก่อน +1

    recommend this guy watch the Husqvarna vid on how to tension a chain and tighten the bar nuts

  • @marcuscicero9587
    @marcuscicero9587 9 หลายเดือนก่อน +1

    smart man goin the extra mile to secure non ethanol fuel

  • @DC5-DRO
    @DC5-DRO 9 หลายเดือนก่อน +1

    I got it and it’s a beast ! On my second years and kicks my dads stihl chainsaw butt for 150 Amazon

    • @scottnoiles8131
      @scottnoiles8131  9 หลายเดือนก่อน +1

      It's not bad for the money. I cut 2.5 chords of firewood and it just ripped through it. 👍 Take care, Scott

    • @DC5-DRO
      @DC5-DRO 8 หลายเดือนก่อน

      Yessir I like it, on second chain and it kicked the live oaks butt I could not split w maul!

  • @philliphall5198
    @philliphall5198 8 หลายเดือนก่อน +2

    I think they are great first time buyers, not much loss if you burn it up or destroy it 😢😢😢

  • @marcuscicero9587
    @marcuscicero9587 9 หลายเดือนก่อน +1

    how the hell was he able to move the chain with the chain brake on

  • @marcuscicero9587
    @marcuscicero9587 9 หลายเดือนก่อน +1

    wish I could still get a 2 stroke snowblower. the straight gas ones are lame

    • @petropete3122
      @petropete3122 3 หลายเดือนก่อน

      Toro use to make one. Not sure if they still do now or not.

  • @riffnstrumguitarlessons9196
    @riffnstrumguitarlessons9196 10 หลายเดือนก่อน

    I cannot for the life of me get this freaking chainsaw going. It started once and began smoking like it was on fire.

    • @scottnoiles8131
      @scottnoiles8131  10 หลายเดือนก่อน

      I wonder if you got the gas/two stroke mixture wrong as this could be why it's smoking badly when it ran? I would check the spark plug (it's set right/spark) along with the air filter to see if anything in the carburettor that's preventing it from starting. hope you get it going!

    • @gerardbrownrigg3498
      @gerardbrownrigg3498 8 หลายเดือนก่อน

      I had the same problem. Drilled 2 small holes in back of the filter cover and it worked excellent after I did that

    • @philliphall5198
      @philliphall5198 8 หลายเดือนก่อน

      Dump the fuel and buy a can of premix and install new plug 😊

  • @rebekaknorthcott1035
    @rebekaknorthcott1035 ปีที่แล้ว +1

    We watched it and liked listening to the birds and you walking in the leaves but Iris got a bit bored and thinks you need to edit the videos

  • @canajian
    @canajian ปีที่แล้ว

    🖐😎👍

  • @HellTriX
    @HellTriX 10 หลายเดือนก่อน

    no update? how did it do?

    • @scottnoiles8131
      @scottnoiles8131  10 หลายเดือนก่อน +1

      I will do a proper review once I run it through its paces. My initial thoughts of the saw are positive. I have cut up 2.5 cords of firewood with the saw and it's handled it really well. I had to make some minor adjustments re: bar oil adjuster screw and turn down the idle of the saw. The chain has worked well - although I have run my file across it at every fuel up. I have a number of trees to cut up in spring and will do a review after this. Take care, Scott

    • @gerardbrownrigg3498
      @gerardbrownrigg3498 8 หลายเดือนก่อน

      Did you find that it went through a lot of gas?
      I have one and that is my only complaint

    • @scottnoiles8131
      @scottnoiles8131  8 หลายเดือนก่อน

      Not anymore than my other chainsaw. Take care, Scott

  • @bobsommers4329
    @bobsommers4329 5 หลายเดือนก่อน

    Garbage ...spent more time putting the chain back on than actually cutting...the so called chain tightener is easily unscrewed and the bar bolts loosen constantly