Phatmoto Rover 2020 [Motorized Bicycle] - 79cc 4 Stroke - Unboxing & Installation Tutorial
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- Please subscribe for more! The Phatmoto Rover 2020 is one of the coolest and easy to install motorized bike of 2020. These are equipped with a 4 stroke 3 HP motor and are able to give you up to 30mph stock from factory. Below I have provided purchase options and a table of content for this video.
Link to buy: www.gasbike.net/collections/m...
Table of content:
Motor Unboxing: 01:09
Bicycle Unboxing: 01:55
Front Wheel Assembly: 03:03
Front Brake Setup: 04:32
Handlebar Installation: 06:18
Front Fork Adjustment (if needed): 07:38
Front Brake Lever & Line Setup: 09:06
Seat Installation: 10:06
Rear Brake Adjustment (if needed): 10:43
Rear Tire Alignment & Pedal/Motor Chain Tension (if needed): 11:11
Pedals Installation: 12:47
Clutch Preparation (before engine install): 14:14
Motor Installation On The Bicycle: 19:01
Clutch and Jack Shaft Chain Installation: 20:35
Jack Shaft Preventive Maintenance: 22:13
Clutch Cover Install: 23:44
Fuel Line Installation: 24:06
Throttle Line Installation: 24:32
Kill Switch Installation: 25:55
Fuel Valve and Choke Demonstration: 26:54
How To Do The First Start: 27:18
How To Correct The Idle (if needed): 28:04
How To Add/Change The Engine Oil: 28:43
My first Ride on The Phatmoto: 31:05
Conclusion: 33:22
#Phatmoto #Rover #79cc - ยานยนต์และพาหนะ
![[TH] VCT Masters Shanghai Playoffs DAY 1 // 100T vs FUT | FNC vs GEN](http://i.ytimg.com/vi/erQ7pGChzxA/mqdefault.jpg)
I'm usually indifferent to these type of bikes but this particular design is very cool. That color just pops and really serves to accentuate that classic style. Pretty impressive.
Just to clear up any confusion the tool that the gentleman calls vice grips are not vice grips at all
Those are in actuality slip joint pliers and are commonly called channel locks
Mount the engine mounting bolts with the head facing up. If the nut comes off you have a better chance of not losing the bolt. In aircraft maintenance if you put the nut up you would probably be fired.
that engine sounds gorgeous
Oh yes they do.
Hahaha! What does "gorgeous" sound like¿! Lol!¡!
It doesn’t like a lawnmower
It's a lifan industrial motor. Basically a Briggs and Stratton clone. It and it's peers are used for everything from mopeds to water pumps to go karts
Great assembly video. I bought the 2022 version. Found pedal chain way too tight. Removed governor inside engine then changed to 19 mm round slide carb. Great performance.
Nice bike, i really like the color, people can see that coming.
That tool is called a set of snap ring pliers. Great job I like that bike it's sweet
And those "vise grip" pliers are "slip joint" or "plumbers" pliers.
Red loctite is a bad idea
Most cases you will need to heat it up to remove it. Blue is fine for a bike.
I suggested he just put one small drop on there..
Thank you for taking the time provide so much detail and informative video. Very much needed and extremely welcomed! 😃
Probably the BEST ride / Speed videos EVER !!, Can see the speedo, hear the engine gives real world feel for the power characteristics of this bike.
THANKS FOR THE GREAT VIDEO
A very nice video, well done. Appreciate you. I would like to add that if you don't do much riding off road, one thing you can do to make your bike faster and improve the range and ride quality is to replace the factory knobby tires with a set of good street tires of the same size. Switching the off road tires for a set of smooth street tires offers advantages and improvements you will notice immediately. The street tires have less rolling resistance than the knobby tires so your millage and speed will both increase. They are also much quieter and give you a better ride and control when riding on pavement, it's Win-Win. Thanks again _ great video.
Way more Better than a factory instruction - understandable and precise - Thank You very much !!! And btw. a very nice bike and colour. LIKE
Excellent video! I just found out about these bikes yesterday, and I'm in the discovery phase. I'm really considering getting one.
Very nicely done tutorial. Excellent videography as well. Thanks for all the tips on assembly. Looking forward to more videos.
Excellent assembly and maintenance, Looks like you have no fear to trip long journey. 🚴👍
One of the best install instruction Videos on TH-cam Thank You!
I just unboxed and started to assemble my new Rover 2020. Your video is what gave me the confidence to perform the task at hand comfortably. I think I noticed a Sachtler Tripod which explains why the video quality was so good. You know your equipment (video). I had to quit because it got too dark in my work area, but I will finish and post again when it's done to let you know how I did tomorrow. Thank you - Jeffeo
Like your instructions, only thing I would change is using BLUE thread locker not the red. Red makes removing the bold almost impossible without destroying it. My experience your may very.
Great video 👍🏽 good commentary and very informative, simplistic instructions bro 😊
Your instructions were spot on. Nice
channel. TX
Nice kit bike tutorial, now I am looking forward to your tweaks on it
Thinking of buying one. Wow, what a great presentation. Thank you!!!
I really dont like the typical gas-frame bike but the spoked wheels make them look better to me personally. Also, I prefer spokes so that when accidents happen, it's possible to straighten the wheels back out.
Spokes are easily the best and lighter option
I've been thinking of a gas bike versus an electric one....since seeing your video, I'll probably to with gas.......great instructions...thanks.
Thanks for sharing. My 2024 Rover is on the way 😁👍
After I had Rocker off road shocks installed on my front wheel by a professional bicycle mechanic, I truly appreciate the double Lock down instead of spacer approach. When it's important there is no replacing a professional. Rear Disk brake is 100% impressive bye the way.
Kool video! I'm totally going to buy one now.
Good, easy instructions cheers
Thank for the helpful video !!!
Thanks this toys, make go back tu resurrection when I was a verry jung guy!
A lot of memories!., thanks!
I'm planning on getting one of these thanks
Just to clear upany confusion the c clip removal tool
Is in actuality known as
Snap ring pliers
Snap rings are for some reason are known c clips cir clips but they are in actuality only sold in stores
As snap rings
Super cool, thanks...
Hey MJ, good video is it possible to jack shaft the jack shaft? So we can power the gears. Thank you.
Excellent video
I love you videos man you're very detailed and very educational for guys like me who just started on this Hobby thank you so much God bless God bless
Really good narrative
This is nice. I guess this is all part of the new normal. 👌
Great 👍 review
Absolutely beautiful ❤️
C-clip is a snap ring, and those are snap ring pliers 👍
Who gives a shit?
@@stevefoster7603 likely only them that have a clue. The others are too stupid to know the difference
He says them are visegrips no they are waterpump pliers
Avoid the red lock tight, thread locker especially if it's a bolt you may want to remove, you can destroy the bolt trying to get it out!!
So does this bike use a standard motorcycle gas cap or do I need to buy a specific one. I was thinking about buying for food delivery but backed out of it because I didn’t know if I could upgrade the cap to a keyed locked cap since I didn’t want people stealing or messing with the gas.
I’ve got a question. What app would you recommend I use to keep track of my speed, distance, etc. Most of the apps I’ve come across for Apple are for exercising. I want something that I can use for reminders to do preventative maintenance. I’ve seen in a few videos on TH-cam some rather cool looking apps tracking speed, average speed, distance etc.
Good video! I'm buying one!
Awesome 😎 Sir..... thanks.... Keep up the good work...
So it’s up and running but when we’re actually on it and you hit the throttle you hear slight clicking noise which we think the chain might be too tight so we’re gonna try and relieve tension but there’s also a slight squeaking and we don’t know if it’s the brakes rubbing it because i did have an issue with the back brake pads being way too tight
You are going to regret using red thread locker.....will need heat to break the bolts. Blue is all you need.
Good looking bike though! The yellow looks awesome!
Yeah, the blue is plenty!
You never use thread locker it just causes trouble later.
Always blue on everything and tight if it comes loose. use red like on my back phat moto sprocket my 2019 back sprocket is not hub piloted - center suported not good. Why things come loose more often when on these bikes no rubber motor mounts like cars, trucks, generators and more to reduce vibration.
Phat moto has solid motor mounts so it wiggles stuff loose like my muscle car with solid motor mounts typical things loose too. I always use blue lock type on everything and if the bolts come loose I put red loctite back in it I never had to use heat backing off blue, red or even green loctite bolts. But when bolts come out or loose they can strip threads break things be a real disaster and leave you stranded. I've seen it a lot from do-it-yourselfers not getting bolts tight enough and doing things right the first time.
Excellent device .
This bike is nice I'm feeling I think is nice perhaps ✨
If blue locktite has less holding power this is true, red is more holding some times requiring heat to remove fasteners!
Very cool.
so much more needed .. gas, oil, brake adjustments etc.. still a goodvideo.
Great video! Learned a lot. Some vids are boring. Not this one!
Tman.....
Excellent
Cool bike,God bless
Very nice and informative video. Did you eventually use the threadlock on the motor? Looks like the adjustment of the chain is by loosening the screws and moving the motor.
You should be the 1st to ride this across the US. Florida to Seattle
Chris Slack Damn can you imagine?
Can’t take that on interstate, too slow.
I built the 212cc with 2.5 stage upgrades hitting 70mph with 4stroke power!(=
Don’t die because you ARE using a bike frame
On the phatmoto frame?
@@st.paulmn9159 yeah bike frames aren't made for 70 mph. Maybe just 15 mph max
@@youngfinance6319 if you're only going 15mph tops on a bicycle something's not right haha
@JayJay One yah.... that "class" is what most criminals call "Anger Management".... instead of FUCK OFF and you go to JAIL... you must kinda like your FREEDOM?? That's NICE..😁✊🔥
Thanks man
Felicitaciones que bonita bicimoto... Saludos desde México.
Master!
Way cool 😎
I would have used a different exhaust. A chrome pipe that came forward and then down around the cover and back toward the rear wheel. Then use a chrome heat shield on the top part of the exhaust to the first bend of the chrome pipe. That would make the bike really stand out, and keep the riders leg from having to move out and away from that cage.
I didn't realize you had to do a complete assembly on these
It's not a complete assembly. All you have to do is mount the front tire, mount the engine and handlebars. A few other items like the throttle, but that's it's a piece of cake. - Jeffeo
As said its not a complete assembly... HOWEVER its a mass production bike 🏍 made with cheap parts. When you get it you NEED to take apart everything grease and oil what should be greased or oiled lockthight everything than ride it.
Thats how i got over 20,000 miles on more or less a stock bike. I did upgrade jackshaft bearings highly recommend doing that right away makes it easier plus the stock bearings suck night and day with some good ones. 👍 even had a bad wreck on my bike folded my CDH forks rim still good! Bike still starts 1 pull but is finally running ruff and gets hot 🔥 fast!
@@miguel360kmc so you took the engine apart and tightlocked it back together?
Good job on this video.. I will be using it to build my bike, thanks!
Use blue loc tite ,have fun getting that bolt off with red stuff ,you'll have to heat it up with a propane torch to soften the loc tite .
Bike looks nice 👌👍nice on the video ma guy you do know your stuff thanks for sharing your knowledge is good info 👍God bless you and the family and the whole world
I think there’s a fitment issue with the EZM transmission. The rear sprocket on the EZM is also huge (so you have to use a tensioner most likely meh!). The go cart transmission that piston bike or gas bike sells is just jackshaft. Haven’t seen a cvt idunno wtf to do for a transmission. Grubee won’t have stock for the 5G for a month or two -Oct 19 2020
UPDATE - the kick stand was hitting the rear brake disc. Not just touching and sanding the kick stand but cut a 1/16th inch cut into the stand. Had to use a blow torch to heat and pull/ bend the stand. That helped a little bit. Finally used a zip tie and tied it up to the frame. It's nice a secure.
On the good note - Did 35 mile per hour top speed at 3/4th throttle. Did not want to push it any more. lol.
Mods - I took off all the throttle assembly and mounted the base plate on top of the engine on one of the OHV bolt and installed the throttle arm and a L- bolt from Home Depot and a throttle bolt to connect to the throttle cable. A cruiser handlebar from my old Huffy and a spring saddle also from my old Huffy. A Suntour 80mm front suspension fork. The stock fork came damaged and bent and tampered. Would not fit the wheel.
VERDICT - Yes I like it.
Get a back fender and a good soft seat and you’re good to go. Nice sleek looking rig.
My crank shaft came with 2 right hand bores in 2019. The left peddle was in perpetual loosening until I replaced the shaft. Love the bike though, the assembly was kind of therapeutic, I thought.
Installed blue lock tite when on new center crank nuts later loosened. Bent bolt got a new one added red lock tite tightened tight. I have turned wrenches for the years all ways use lock tite. For rust prevention, backing off, breaking off, stripping threads out when coming loose and more! I always say do the job right the first time. So you don't have to do it a second time possibly get hurt spend more down time and money. So many people I have come behind and fixed things for not doing the job right and stuff not tight with lock tite the first time and not thinking (What could go wrong with what I'm doing?)
Cool ride you got side car for the puppy ha
You did a very good job with installation of parts and making video.
I'd consider replacing that oil drain bolt with a petcock to which I could attach a hose so that future oil changes would be neat.
I have the same one it’s a little older black one but when I take off it stalls unless I pedal in a forward motion what do you think is causing it to stall when I hit the throttle when I’m not moving ?
Im going to see if the Honda GX100 fits. the valve cover is real close to the tank, I hope the Honda has enough clearance. ill find out because I have a engine and a 2022 Phatmoto coming in.
where do you live? it kinda has a Hawaii feel to it but it isn't.
Does the bike come with a way to add lighting ,front and rear?
I always soak my chain with
90 weight gear oil and take
A clean cloth to get off any
Excess. It will penetrate the
Rollers. Never use greese on
Chain it will not penetrate the
Rollers. If u have a used chain
Make Shure u clean it with a
Brush and solvent dry it off and
Put oil on a cloth and soak your
Chain with it and then take another cloth and clean off any
Access .this will save your chain
And I have been using this trick
For over 50 years . Check your chain often and make Shure u
Don't have more then half inch
Of slack up and down in your
Chain that way u save your sprokets from wear to soon👱
Thank you for the great video. Would you please say how much and where did you buy it from?
Hey is possible to install gasbike wheels i have cdhpower 29" 700c black aluminum mag wheels I paid 170 $ is that ok for that phatmoto without customization? I'm going to buy one of those in 3 months lol.
Ty i appreciate it.
What is the gps app you are using for the speedo ty.
Always keep all controls on the handlebars loose enough to just barely to rotate that way if you wreck or the bike falls over they just turn and dont break
my 80€ engine is still hitting with 15 mm carburetor 77 km/h insane fast
@Reuben Thatcher NO ONE CARES SCAMMER!!!
Mine actually works best with the rear wheel cocked slightly to the left, my jackshaft is actually on a very slight angle, I don't know if they're all like that but I have seen a couple others that are like that.
Wrong
@@raynellwelch2792 do you have a Phatmoto? Is the jack shaft straight. Mines s on a slight angle, I've heard other people say the same thing.
@@mjsmjs7905 Yeah I hade the shop put it together
do you just plug up the tube or put a little air filter on it?
it's so phat
What you of oil should be used? Regular car oil or 4 stroke?
Nicely done hows it holding up?
The build quality of the Phatmoto Rover looks excellent.
A solid engine mount, is better than the clamp on plates used on other setups including my 4 stroke, to the fixed countershaft and reinforcement gussets. How about changing the exhaust to a pipe and silencer [ no hot exhaust blowing on your leg ].
I have fitted a 39cc 4 stroke Huaseng to an Avalanche Cruz88. The engine is outboard on the LHS. Busy with changing the sprocket to a 49T from 44T. I live in a hilly area, so need more low down pull over speed and it is a small engine.
Will wait for the upgrades.
.
Love the way you pronounce it Pat-motot instead of Fat-moto! A Very good watch, thank you very much for this one! The best of luck with your future builds.
Sincerely,
Alicia Antoniadis from Sweden
Agreed
NEVER ride with sandals. Also, you dont make handlebar controls ( brake levers) too tight. You want them to move out of the way if you go down, not break off.
I got the 2020 version and after adjusting the idle the throttle seems to take for ever to respond and the bike cuts in and out. It’s like it’s starving for fuel. I barely have a mile on it. Any thoughts?
on mine the choke was marked wrong
@@markhagerman9736 so where it say’s off it’s really on?
You should a fuel shutoff valve on the tank.
Im having trouble with the throttle i pull it and it doesn’t snap back in to place and it doesn’t move the throttle cable at all, also im having a bit of trouble getting the chain to be more lose and the breaks are giving me trouble to i tried to tighten it and still really nothing not sure if im doing stuff wrong
Spary some wd40 in the openings of the cable and around the Linkage
can anyone answer me a question about the tube coming out of the OHV?
once you put on a different carb
Awesome bike live the yellow. Did you like the spoke rims better than the colored 7 split allow mags.
David Lorince Yes like the yellow. I prefer these spoke rims over the alloy. They seem sturdier.
@@MJTechChannel when you mount the motor onto the frame that lower flange mount is there a rubber gasket to reduce vibration throughout the frame ?
where did you-guys buy the phatmoto bikes ?
it come in blue ?
I got a question I just got the fat Moto and I have to keep it full throttle at all times or will pretty much come to a complete stop on top of that it's really hard to keep it at full throttle it really hurts your wrist did I do something wrong when I installed it
Check your idle screw on the carb. It has a round black cap on the side. You need to remove that black cap and the screw will be exposed. Move it clockwise until reaching normal idle. Let me know how it goes!
It's idling perfect but when I spin the tires they come to a stop quick is that normal
I oiled my cable that helps. Also motor cycle stores has something that slides over hand grip called cramp buster - throttle assist for $10.00 I'm going to try soon. Oil in throttle cable definitely helped me. Also loosen and greese pivot points on engine at linkage not to tight on linkage nut.
Thanks man but I already have mine up for sale it's just made cheap I've already had two replacement parts and I don't want to go through another breakdown so I'm selling it
@@810craig2 how much are you selling it for? What city and state are you in? I know what you mean I have a 2019 model phat moto with a bit of miles on it and it's constantly working on the phat moto and maintaining it. But at the right price I might buy another one.
Might get one any good deals??
I’m from Australia 🇦🇺??