ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How To Install a 4-Stroke Engine Kit on your Bicycle - 48cc - Motorized Bicycle
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2013
- BikeBerry.com technician, Jonny, goes over tips and tricks on how to install a 49cc or 50cc 4-stroke engine kit on a standard beach cruiser. This complete installation manual gives great advice on installing the complete motorized gas bike kit as long as the bike is a 26" Men's beach cruiser. By providing this extensive tutorial, we are here to help you turn your bicycle into a motorized bicycle.
Got any other advice? Any questions about the installation? Leave a comment!
Credits:
"Cool Rock" Kevin MacLeod
"Faster Does It" Kevin MacLeod
"Wah Game Loop" Kevin MacLeod
"Montego" Kevin MacLeod
"Funk Game Loop" Kevin MacLeod
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
Dude went from Napoleon Dynamite to Bobby Hill in the course of 13 minutes!!!
9 Years later Oct 2022, this early BikeBerry installation is still good today.
If you pause at 12:47 you will see that this bike does not have clearance between the crank arm and transmission housing, making conventional riding impossible. If you run out of gas or the engine quits, you will be pushing this puppy. It is also a good idea to make certain that oil is present in the crankcase in the correct amount BEFORE adding fuel...
You're correct. Adding the engine oil is definitely a pivotal part in getting the motor running. I'll add an annotation. Thanks for noticing.
You can tell a good mechanic by the tools they use! Slip joint pliers are not made for hex nuts but a open end or box wrench is! If I saw someone using a per of pliers on my bolts or nuts unless stripped I would come unglued! Been making my living work on motorcycles and doing machine work for 45 plus years!!!!!!!!
i don't think anyone should pliers or wrenches on their nuts
YAWN
Jeff Bicht shut up old man
@@robh.3124 Lmao 😂
100 % correct. Use the correct tool for the job.
9:22 You can use compressed air to remove the handlebar grips. Stick the end of a tube air nozzle under the grip and blow.
Or wd 40
The most Cleanest Professional simple and easy installation video i have ever seen on the internet. love it ...im subscribing
I love how everyone here is tripping out on him cutting his hair halfway through the video 😆
appreaciate the diy video i been going over it all day long ... been looking for more diy videos as i plan on studying my but off on these videos until i just know what to do without thinking about it do will be checking your other videos out ty!
Thank You im plaining on putting everything on now in next week. Thanks alot bikeberry!
Yes, it's a 26" Micargi Men's Tahiti. Keep in mind that they recently made a design change where the cranks are designed for forward pedaling which means the crank housing is in front of the seat post instead of underneath it. This makes installation a little more difficult, but still doable.
What name of a good 4 stroke kit motor wise
How are you doing, I see your video was published long time ago, I got a question:
What is the right name of a new crank shaft you use on approximately 4:40 in your video?
Is it threaded 3 ps crank shaft?
Thank you.
Napoleon Dynamite does motorbike installation tutorials?!
+Ryan K hes working for bikeberry now!!!
Duh
@Cornel Rusu IKR, he's more like Bette Midler's grandnephew
Well hes gotta tow kip into town somehow
excellent video very well made with detail instructions
Good tutorial, I now feel confident about to install my first 4-cycle kit
Step 1: Vote for Pedro
Gosh
Right😆
Great instructive Video...Respectfully suggesting chafe padding of the motor mount clamps to preserve paint. Use old inner-tube material or what-have-you.
I love this dude. Super good vibes
Very good video, please make more! 😁👍
Awesome video!
You did a fine job with this video. Thank you for posting. Ignore the trolls. You did a real public service.
Sure, a public service showing how not to do the job.
Thank for you time and show put together motor bike.
Always glad to help.
Great job on the vid! Question: Does the geared transmission slip? I've heard that can be a problem. If so, what can you do to correct it? Thanks again.
Yea I'm definitely switching too the 4 stroke I'm tired of the CDI boxes on the 2 strokes getting fried all the time
Good job
Is there a tutorial for doing this on geared bikes? Also my friend has one, and it compression starts, and has a clutch. What kind of build would I do for that?
Nice job , when covering splices exposed to the elements a small tie wrap keeps fraying next to nothing . Thanks be
Yes i was wondering if we can convert an e bike to a hybrid using this method however I am unsure because of the electric motor being on the back wheel and as well as it also being twist throttle based
Please make a video on how to install electronic starter in 4 stroke or 2 stroke engine.
How did you bolt the engine in to the mount with the other 2 covered?
Thank you
Hey BikeBerry, could we get a video showing this 4-stroke installed on a typical hard tail mountain bike like a Specialized Rockhopper?
Also, does installing a motor mean that the front derailleur and 3-speed chainrings can no longer be used?
I would think that motor shelf might get in be way of the derailleur mount. If the crank has to be replaced to allow for the thickness of the engine and mount to clear the sprocket then I see it being a problem
what maintenance is required for kits like these and how often? how frequently do we need to change the engine oil? from where can i buy kits that require minimal maintenance?
Don't forget to let people know, one pedal is left thread and one is right hand threaded.
Starts with a coaster brake on the rear wheel, no brake on the front wheel, ends with hand brakes on both wheels.
Where can I find information on how to break-in this engine after installation? Thank you @BikeBerrycom
Also , removing the clutch springs improves clutch and overall motor performance. It allows the clutch to fully grip at low RPMs
I tried that, and my bike stalls at idle because it grips. Yes, I played with the idle speed, but couldn’t get it to stop so I put the springs back in.
you really just gotta bend them a little. there’s a video on here that shows that pretty sure.
Can it be installed with a jack shafts on a mouthing bike to be able to shift the gears while riding and have the engine power the sprockets
I have an Micargi Pantera 7 Speed and I'm just curious does the flying horse has made any 2 stroke 49CC engines
Will this engine fit on a Micargi Falcon GT?
Your website for BikeBerry shows a couple of different complete four-stroke motor kits there. Which one is this kit?
Would it make a difference if adding an expansion chamber and smaller tooth sprocket?
I have a question about the coaster brake arm. Do I need to reinstall it if i will have a rear and front brake
what is the max length the mounting plate extends too?
Can the foam from the carburetor filter be exposed? what happens if it gets exposed? exposed that I say is without the protective cover. thanks.
Will the pedal also clear a belt transmission or is a wide crankshaft needed?
what are the needed dimensions for the engine to fit?
How do you put the muffler on. The bolts protrude from the engine and are to long. Looks to only fit the stock box muffler it came with.
this woodfit nice on my 29 onex
Can this motor be pedal started? Or do you have to use the pull starter?
Thanks Napoleon
Do these kits come with 3piece wide crank set for mine did not come with the long drive shaft in only came with the peddles
Question can I add on a shock fork on a beach cruiser and if a gear block can work on the back wheel just asking for you advise bless up 🙏 you self out there
Would I be able to make this work mounting it above my back wheel?
My kit came with the transmission separate from the engine. Do you have instructions on how to assemble?
You have to use the pull start.
Is there a way to improve the clutch
What gas octane should be used for this engine? 85/87 or high octane like 91?
Can kits like these work with a multi-speed bike?
Anyidea where to get the correct crank shaft?
What about the 4 stroke oil? How much do we put in the motor with oil?
Could you mount this kit to a larger frame bike (28"-29") if you modified the chain to make it longer?
+ColtWKnight the chain that comes in the kit was way longer than I needed for 26s. it should be long enough easily for a 29 were only talking about 3 inches of chain-----my 26 inch build I had about ohhh 5 inches left after I cut it where I needed it you should be good bro
Does the engine kit come with torque specs?
Also will it mount on a 29 inch mountain bike or is the max size only 26 inch
You put the tensioner pulley in a maxed out position when the chain stretches you'll have to move the clamp. I think it should of been put about in the middle lower end of the bracket. Great video though
Where we can buy it?
is that bike a huffy or Schwinn?
You should shrink wrap the wiring splice.
Ever hot any sweet jumps on that thing?
I have the same bike frame, but in my kit I got a long axle that for a mountain bike, where do I get that central axle that has a thread? or how did you do?
hey, what is the purpose of those two vinyl hoses coming off the carb?
What oil do you use for it?
Hey I was looking at these motors at ebay and found one for 22 bucks full kit is it worth it?
Does the carburetor need to be assembled like a 2 stroke ?
What size bottom bracket did you use???!!!
This dude got a haircut halfway through the video WTF!!
Russell Fedorov 😋😂
On a Huffy beach cruiser you are better off using only the back rubber grommet because the front one will push the sprocket out too far making it difficult to align everything. Just be sure to remove the bearing dust cover and cut the lip so you can flatten it out over the top of the sprocket. Other than that the stock 40 tooth fits perfectly and you do NOT have to bend the brake arm.
I got a 4 stroke kit with a#25 chain?is this normal all my bikes have a 415 or #41 chain?
U hittin dabs off camera lol u look fried!
😆
My 4 stroke clutch engages way too late and it always slips when i apply throttle so acceleration is practically non existent and it's so bad that my bike isn't usable at the moment.
I think my clutch springs are too stiff, is there anything i can do?
So..you added clamp brakes rear and front aside from the coaster brakes?
Can that engine mount support the Predator 79cc Engine?? Please help
Not on the stock mount the 4-stroke 48cc comes with, but I believe it can for the Heavy Duty Mount: www.bikeberry.com/engine-kit-parts/4-stroke-parts/heavy-duty-4-stroke-mount-plate.html
We are currently out of stock of it though. It should be available again in the next 1-2 weeks.
and what you do to not die the clutch easy?
What all do I need to buy?
How come mine did not come with the crank shaft, are they suppose to come with a crank shaft, my bike can't get built now until I get one, there is still 3 inches or so left wen useing big pedels you will need a 8 inch crank shaft for the larger pedals, also with my beach cruzer which has one fat bar needs extra large engine mounts which the kit ones don't fit as well as the fule tank one's aswell
I'm using this kit on a Unisex bike. How to add a support to the engine. Probably not necessary as the engine will be totally exposed. Thinking a support bracket would help keep secure. Any ideas. Tia.
Do I need to install the pedal chain or can I just ride without the need to pedal
I can't find a thing on enstalling a motor on a three wheel bicycle. Help please.
Where do the kill switch wires connect he cut them?
If I needed to replace the motor can I just buy the motor and just reconnect that or do I need the whole kit ?
Do you have to have a certain bike for this?
Can i get this kit in portugal ?
can i switch out a 2 stroke for a 4 stroke by just replaceing the engine?
What was the purpose of the drilled hole in the handle bar??
how match hp have this engin
What's the top speed with this kit ?
The heat shields do nothing but overheat the engine if there’s not a fan blowing through them I seen a lot of people with Chinese scooters Who remove the fan to try to make it faster only to blow it up
You can pick the same thing w d-40 is that the self to wash your hands
THE SMALL YELLOW BOTON
WHAT IS THE FUNTION????
THANKS
Extra wide crank and sprocket did not come with the kit?
Do you have any videos on how to remove the flywheel? I recently purchased a duel chain transmission, and need to replace the old flywheel with a new one.
I would like to take a cross country trip on a motorized bike would any brand of engine stand up to such a trip or what engine would be best
Lk4ahro I would say a honda 4 stroke, also keep spare parts