P0192 - High pressure fuel sensor - REMOVE AND REPLACE, Peugeot, Citroen
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2023
- How to Remove and Replace High pressure fuel sensor - Full tutorial
P0192 - Short circuit to earth or value too low
Fault Code: P0192
➢ Description of Fault: Measurement of the pressure in the fuel injection rail; Short circuit to earth; Pressure too low. Voltage lower than 200 mV.
➢ Symptoms: Jerking/stalling, Engine acceleration at wrong time, Noise,
Starting problem, Lack of power, Absence of automatic stopping of the internal combustion engine (If the vehicle has the Stop and Start system).
➢ Suspect Areas: Pressure sensor on the fuel high-pressure injection rail, Electrical harness, Connectors.
If this video is useful to you, you can press the "Thanks" button to buy me a coffee.
WARNING!
This video is for informational purposes only. Any injury, damage or loss that may result from improper use of these tools, equipment or information contained in this video is the sole responsibility of the user and not Adrian Drăgan (this channel) or TH-cam.
I recommend that you do this in an authorized service.
☕🍵 If this video tutorial was helpful to you, you can press the "Thanks" button to buy me a coffee 😊
1.6 HDI High pressure fuel sensor location (OE Number: 1570.G2 , 9655465480 )
1.6 HDI Fuel high pressure common injection rail location
1.6 HDI EGR Location
1.6 HDI Senzor Rrampa Comuna Inalta Presiune
1.6 HDI Sensor de combustible de alta presión
Capteur haute pression carburant 1.6 HDI
1.6 Sensor de combustível de alta pressão HDI
1.6 HDI Датчик топлива высокого давления
1.6 HDI Yüksek basınçlı yakıt sensörü
1.6 HDI Vysokotlaký snímač paliva
1.6 HDI高压燃油传感器
חיישן דלק בלחץ גבוה 1.6 HDI
1.6 HDI Sensore carburante alta pressione
➢ Tutorials:
- 1.6 HDI Air Filter Box Removal: • 1.6 HDI Air Filter Box...
- Peugeot 307, 308 How to Remove Wiper Arm and Windscreen Grille: • How To Remove Wiper Ar...
- Peugeot 307, 308 Battery Removal: • How to remove battery ...
- Peugeot 1.6 HDI fuel diesel filter replace: • How to change fuel fil...
➢ Facebook Page: / adrian-pgt-diy-repairs...
➢ TikTok: / adrianpgt
➢ If you like, you can buy me a coffee: paypal.me/adioperator?locale....
➢ Skoda Volkswagen Audi Seat Tutorials: / justacar
➢ Dacia Renault Tutorials: / @adriandrnro
Peugeot Right to repair
Citroen Right to repair
Comment, Thumbs up, Share, and Subscribe!
Peugeot 206, Peugeot 307, Peugeot 308, Peugeot Bipper, Peugeot 3008, Peugeot 5008, Peugeot 207, Peugeot 407,
BIPPER (AA_), BIPPER TEPEE, EXPERT (VF3A_, VF3U_, VF3X_), PARTNER
CITROËN Berlingo, CITROËN Berlingo Multispace, CITROËN C1, CITROËN C2, CITROËN C3, CITROËN C3 Picasso, CITROËN C4, CITROËN C4 Grand Picasso, CITROËN C5, Jumpy, Nemo, Xara Picasso
Fiat Scudo
Toyota Aygo
Peugeot Diagbox
Diagbox Citroen
DV6 ATED4 - 90 PS (66 kW; 89 hp) Turbo-Diesel 16-valve
DV6 B - 75 PS (55 kW; 74 hp) Turbo-Diesel 16-valve
DV6 TED4 - 110 PS (81 kW; 108 hp) Turbo-Diesel 16-valve
8HS DV4TED , 8HX DV4TD , 8HY DV4TED4 , 8HZ DV4TD
9HT (DV6BUTED4)
9HU (DV6UTED4)
9HX (DV6ATED4)
9HY (DV6TED4)
9HZ (DV6TED4)
DV4D
DV6B
Ford 1.6 TDCI
3M5Q9D280AC
1 148 081
1 346 474
1747239
1 230 958
2S6Q-9D280-AA
1447993 - ยานยนต์และพาหนะ
Thank you, very helpful!
Glad it was helpful!
excellent, thank you!
Hello, Adrian thank you very much for what you provide. I have a question about canceling the EGR system. What do you advise me to do? Thank you.
Exelente video bien expliquer
Super et merci ✨👍🏽
Very good video, well done! I want to make a proposal to disassemble and clean (possibly) the oil cooler!
Hello. It's a good tutorial idea. I'm putting the tutorial on the list to probably be done in the spring.
@@AdrianDragan what to expect in the next videos, could you share?
@user-hi4tn5mc2z I still don't have any videos filmed for the next few days. For me this is a very busy period and probably the next video will be only in a month. But I have on the list for the following videos for the 308 t7: egr 1.6 hdi replacement, windshield grill sealing, replacing Android multimedia with a newer one and physical buttons, and others...
Nice work 👏
Thanks!
good works!
Thanks!
Hi Adrian, thank you for the vídeo. This tutorial works on citroen c4 1.6 thp?
Hello. It doesn't work, they are different engines.
hello iam from indonesia, have problem with fuel pressure sensor in peugeot 307HDi 2.0 liter. its hard to find the parts in here. do you know OEM or similar that i can use for replacement?
Hello. Send me a message on my Facebook page or Insta with the VIN number of your car:
➢ Instagram: instagram.com/adrian.pgt
➢ Facebook Page: facebook.com/Adrian-PGT-DIY-Repairs-101561312503402
Would copper grease works to stick the washer?
Hi. Use only grease with no other particles in it.
Salutăm
1. Codurile de pe computer via interfața se aseamănă în ce proporție la mașinile cu benzină sau motorină?
2. Ați prezentat undeva valorile de verificare cu aparatul de măsură la senzorii masinii ? Mulțumesc!
Salut.
1. Sunt motoare diferite, codurile de eroare pot fi diferite.
2. Nu am facut o comparatie intre valorile zenzoriului vechi si valorile celui nou.
Salut Adrian! Pe ce windows rulezi diagbox? Eu am o interfață after market și nu merge pe win 10, doar pe win 7.
Salut. Rulează pe Windows 10 cu virtual machine VMware.
@@AdrianDragan Mulțumesc pentru info 🍻
very nice. did you notice any improvement in fuel consumption after replacing the pressure sensor?
Hello. Can't say I saw any difference in fuel consumption. However, this sensor has no influence on consumption.
@@AdrianDraganSalut mon frère j'ai un code P0192 des fois quand j accelaire plus 2500 tour pour passer en 3eme la voiture s arête. Hier j'ai changé le filtre à gasoil. Sa rien changer le problème est toujour la
@@jimmysaint515 Bonjour. Ce capteur de la rampe haute pression est probablement à changer.
@@AdrianDragan est ce que c'est pas le regulateur de pression carburant qui fait ce problème le diagnostic nous dit valeur d entrer trop basse
@@AdrianDraganHello this is an interesting video for me I have a problem when I accelerate into 2nd gear at more than 2500 revs to go into 3rd gear the engine stops I have the fault code P0192 value d between too low. is that what it is it is indeed the pressure sensor to be changed thank you if you tell me if it is the sensor to be changed that must be changed I changed the fuel filter but the problem is still please help me

Commentaires
Résultats Web
Salut! La eroarea P1113 si P0087 Fuel high presure regulation, cu urmatoarele simptome cand iau piciorul de pe acceleratie masina dă in nas, ca si cand ar intrerupe, de vreo doua ori imediat dupa ce am pornit motorul s-a oprit si am dat ceva la automat pana sa porneasca iar, acum merge ok, dar am gasit aceste doua erori, necesite schimbat senzorul sau ar putea fi alta cauza?
Salutare ai rezolvat ceva..eu am aceeași eroare P0087 am inlocuit senzorul și face lafel..adică îmi apare cand si cand eroarea și dacă o țin constant cu treapta a2..a 3 îmi da în nas..întrerupe puțin în sarcina nu se simte..nu știu ce sai mai fac😢..șterg eroare și o perioada nu apare
@@marianstoica3330 salut, vezi sa nu fie mufa de la senzorul de presiune de la rampa comună
Salut Adrian. Este necesar cuplul de strângere Nm???? Si daca nu cunosti perechea??? Mulțumesc
Salut! Este necesar sa folosesti o cheie dinamometrica pentru a strânge la cuplul specificat. Poti strânge și la mână dacă ești sigur de ceea ce faci. Despre ce pereche vorbești?
@@AdrianDragan Nu stiu cuplul, dar ar putea fi 45nm pentru ca este tot un Peugeot, 1.5 hdi T9
@@tbctb243 Cel mai probabil este același cuplu.
Ei bine, mulțumesc pentru informații
Care ar fi prețul pentru o intervenție de genu? 😊
Salut! Nu stiu care ar fi prețul deoarece eu am făcut operatiunea pe masina mea în garajul propriu, deci nu am service auto 🙂
thanks for the video, I am going to change it as it lose power after 2000rpm, do you know the part number of the tiny washer?
Hi. ELRING 887.090
@@AdrianDragan I had the great idea to change the glow plugs 3 out of 4 snapped in, the metal part came out with the glow plug making them not magnetic, I hammered them into the cylinder head but was impossible to take them out with the vacuum cleaner, will scrap the car at the end, new glow plugs new fuel pressure sensor for nothing 🙃
@@Franco_Emmanuel Did you diagnose the car? What error did it have?
@@AdrianDragan there were P0092 car broke down because of this, the glow plugs error had for years error code P1351, as I felt motivated replacing the fuel pressure sensor so as I got new glow plugs for long time I said to my self why no take the risk and change the glowplugs 🥲
@@AdrianDragan P0092 for the fuel pressure sensor and P1352 for the glowplugs,I had this error for long time, I got new glow plugs and said to myself why not change them as I felt motivated changing the fuel pressure sensor 🥲
what kind of diagnostic you have for peugeot cars?? i buy some cheap chinese and they dont show nothing
You need a proper scanner for Peugeot/ Citroen's
seems so because otherwise it doesnt show nothing and its looks like connector dont work@@navy7804
i got delphi scanner, its ob2. Pretty handy and not expensive 80-100 euro its also usefull for other cars
@@swd6430 i have cheap chinese for 20$ and it show nothing
Salutare am aceeasi eroare...am inlocuit senzorul..si tot apare cand si cand..il sterg merge o perioada si iar apare..nu stiu ce sai mai fac..este masina personala
Salutare. Ar trebui verificata si mufa impreuna cu cablurile, posibil sa fie un contact slab in mufa. Cand a fost inlocuit senzorul, mufa a fost curatata cu sray pentru contacte electrice?
@@AdrianDragan da a fost curățată..ai idee siguranțele care sunt deasupra bateriei or avea legătură??
Scz acum am băgat realizat ca eu am cod eroare P0087..presiune scazuta combustibil..și am inlocuit senzorul de pe rampa
@@marianstoica3330 tengo el mismo problema de baja presión de combustible, como lo has solucionado cual era el problema? Gracias
What a pain in the arse to get to