Nice mods. Looks classy. Just picked up my Kia tribute similar to yours in colour, just orders the Eibach and the mbrp catback. Pickup a used jb4. Tinted and wrapped it. Thinking about smoking the lights. Your video was very informative and I have a similar taste. Great upload
Congratulations on the car! Thank you very much for the compliment as well. That video was from last summer,of course I have added a few extra things this year. If you follow my other videos you will see some of the modifications I did this year. Hope you enjoy your car!
What part of AB are you in? I have a 22. Also just bought a used Jb4. I am pretty mechanically inclined, but since I am still under warranty, I am thinking to have a mechanic install new plugs. Dealer wants $600. That is a lot..
Very cool mods! I got the roof spoiler from spoiler king and was trying to figure out where to put the sticker and I see u put it on the sway bars, looks cool! Also those Ali express exhaust tips look great, ex install?
Thank you! The install on the tips wasn’t to difficult. A lot of guys cut the plastic in the bumper but I was able to get them to fit with minor trimming.
Love your build by the way. You may have posted this awhile ago but, I just bought the same speaker grille covers you have. Did you have any trouble getting the grilles to stick and stay attached? I read that this is a problem. And I agree, if you can get them to stick, they're absolutely beautiful 😍
Thank you! Those speaker grills will not stay attached if you just stick them on. You need to use a 3m adhesion promoter. They are little pads with a solution. They help the tape activate. Mine have now been on for a couple of years with zero issues.
@@OVRBoosted You are such a gentleman! I have always thought so.. Your videos are strait forward and honest and I always learn alot from them! Thank you so much for responding so quickly. I'll give the 3m pads a try and update you on my progress...I may include a photo, if that's alright? My build is coming along, I just installed Jun.bl racing exhaust with downpipe, plus Super Pro swaybars! Next addition is a BMS intercooler. and Afe hot & cold pipes (red). Anyway, thanks again so much and I'll continue to follow your build! Sincerely yours, Stephen Reilly 😉✌
@@stephenreilly4762 no problem at all, the promoter will make them stick. I use to work at a body shop and that’s what was used to put moulding and emblems back on. Don’t rub it on the 3m tape itself, rub the solution on the plastic you want to stick something to. Take your time because as soon as you touch the 3m tape to it you have a really sticky situation.
Hello from Tooele, Utah USA 🇺🇸 Thanks Casey for the tip on attaching the speaker grilles. It worked fantastic 👏 and as you know make a big improvement in appearance in the cabin!😊 I wanted to send you a picture of the finished product, but I couldn't figure out how to send or attach it or whatever 🤔 But thanks mucho!!
Casey that is correct, I bought used diffuser and used it modify my templates for diffuser so no problem now. I improved the original which turned out to be bad considering it is suppose to be made in Germany.
Yeah my mold was bad, I have a body shop back ground so I did put a lot of hours in to fix it. I remember you mentioned that you built a better mold, so I pass that information on. I believe you probably just got an order from a fellow who seem my video. I supplied him with a link to the Defuser on your site.
@@OVRBoosted yes he ordered it from me 6 days ago. Actually I needed to modify existing template for deck and I made new ones for fins and I know it now has a perfect fit. If there are some discrepancies it can only be because of the fact I had diffuser sitting on the bench and it might sit a bit differently when on the car but even so it can't be much, not something that can't be adjusted.
I run a WMI setup from BMS off a JB4. I was running it along with JB4 tuning Map7 but have recently gone full ECU/TCU tuned (Tork) so now the JB4 is only used for logging and controlling the WMI. I have no experience with CPI so I can't say if it's better or worse but I've had absolutely zero issues with the WMI setup. That said I don't drive my Stinger all that often since I live next to where I work. This year I've used a total of 2 gallons of boost juice. I can't easily get methanol or E85 where I live unfortunately.
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
As someone that just got a Stinger, this was a huge help. Thanks for the video.
No problem at all I hoped it helped you. Congratulations on the stinger I think you will enjoy it.
2020 stingergt2 panthera metal. Great car.
Nice mods. Looks classy. Just picked up my Kia tribute similar to yours in colour, just orders the Eibach and the mbrp catback. Pickup a used jb4. Tinted and wrapped it. Thinking about smoking the lights. Your video was very informative and I have a similar taste. Great upload
Congratulations on the car! Thank you very much for the compliment as well. That video was from last summer,of course I have added a few extra things this year. If you follow my other videos you will see some of the modifications I did this year. Hope you enjoy your car!
Loving your build. I would go with the CPI over the WMI. I think the M&S rear vent covers would look awesome with your setup also
Thank you very much. I have been looking at the rear vent covers, but I also like the Adro ones as well.
What part of AB are you in? I have a 22. Also just bought a used Jb4. I am pretty mechanically inclined, but since I am still under warranty, I am thinking to have a mechanic install new plugs. Dealer wants $600. That is a lot..
I’m in Alberta. The plugs are not as hard as you’d think. Lots of videos on how to get it done.
Great mods. Your Stinger looks fantastic!
Thank you, it’s definitely a work in progress. I’m not done yet, but things get expensive.
Very cool mods! I got the roof spoiler from spoiler king and was trying to figure out where to put the sticker and I see u put it on the sway bars, looks cool! Also those Ali express exhaust tips look great, ex install?
Thank you! The install on the tips wasn’t to difficult. A lot of guys cut the plastic in the bumper but I was able to get them to fit with minor trimming.
Love your build by the way. You may have posted this awhile ago but, I just bought the same speaker grille covers you have. Did you have any trouble getting the grilles to stick and stay attached? I read that this is a problem. And I agree, if you can get them to stick, they're absolutely beautiful 😍
Thank you! Those speaker grills will not stay attached if you just stick them on. You need to use a 3m adhesion promoter. They are little pads with a solution. They help the tape activate. Mine have now been on for a couple of years with zero issues.
Here is a link to them.
7000002020 - 3M Adhesion Promoter 4298 Sponge Applicator Packet 2.5 cc (3EA) a.co/d/d3IV09Z
@@OVRBoosted
You are such a gentleman! I have always thought so.. Your videos are strait forward and honest and I always learn alot from them! Thank you so much for responding so quickly. I'll give the 3m pads a try and update you on my progress...I may include a photo, if that's alright? My build is coming along, I just installed Jun.bl racing exhaust with downpipe, plus Super Pro swaybars! Next addition is a BMS intercooler. and Afe hot & cold pipes (red). Anyway, thanks again so much and I'll continue to follow your build!
Sincerely yours,
Stephen Reilly 😉✌
@@stephenreilly4762 no problem at all, the promoter will make them stick. I use to work at a body shop and that’s what was used to put moulding and emblems back on. Don’t rub it on the 3m tape itself, rub the solution on the plastic you want to stick something to. Take your time because as soon as you touch the 3m tape to it you have a really sticky situation.
Hello from Tooele, Utah USA 🇺🇸
Thanks Casey for the tip on attaching the speaker grilles. It worked fantastic 👏 and as you know make a big improvement in appearance in the cabin!😊 I wanted to send you a picture of the finished product, but I couldn't figure out how to send or attach it or whatever 🤔 But thanks mucho!!
Casey that is correct, I bought used diffuser and used it modify my templates for diffuser so no problem now. I improved the original which turned out to be bad considering it is suppose to be made in Germany.
Yeah my mold was bad, I have a body shop back ground so I did put a lot of hours in to fix it. I remember you mentioned that you built a better mold, so I pass that information on. I believe you probably just got an order from a fellow who seem my video. I supplied him with a link to the Defuser on your site.
@@OVRBoosted yes he ordered it from me 6 days ago. Actually I needed to modify existing template for deck and I made new ones for fins and I know it now has a perfect fit. If there are some discrepancies it can only be because of the fact I had diffuser sitting on the bench and it might sit a bit differently when on the car but even so it can't be much, not something that can't be adjusted.
I run a WMI setup from BMS off a JB4. I was running it along with JB4 tuning Map7 but have recently gone full ECU/TCU tuned (Tork) so now the JB4 is only used for logging and controlling the WMI. I have no experience with CPI so I can't say if it's better or worse but I've had absolutely zero issues with the WMI setup. That said I don't drive my Stinger all that often since I live next to where I work. This year I've used a total of 2 gallons of boost juice. I can't easily get methanol or E85 where I live unfortunately.
Sounds like you have a great set up. I do believe my next modification will be a tcu tune.
Do a muffler delete on the Borla it sounds so much better man and it isnt obnoxious
I’ll have to think about that. I find it sounds good now with no in cabin drone ever since I put on different exhaust tips.
What’s the purpose of the roof spoiler if you don’t mind me asking?
Just personal preference for exterior styling. It serves no other purpose other then looks.
i like your mod overall. 👍
Thank you very much, I appreciate that.
How’s the reliability?
Pretty darn good!
CPI OR. TERRY BURGERS NEW fuel pump to run. FULL E85. NICE. UPGRADES
I was gonna message you on Instagram and ask you about the cpi install you did.
스팅어~