Thank you for the tips. As weather (temperature & humidity) permits I am varnishing the top of my bait box & wet bar for my '65 Commander. I have been using Petit 2015 High Build and am quite satisfied with the product. I'm at 8 coats and needs scuff with 400 then 2 following coats of 1015. These prices are in the sun most of the summer even though I am in a covered slip. Thank you again and yes I have a 3" putty knife with sand paper attached to it.
Thanks Mike. The inside corner, coaming, cowling and deck at the end of your video, how do you varnish that? Are you able to do that with a foam brush without leaving a puddle/runs? Maybe that's a future video?
We use a 2 inch smaller brush and also go over that area a couple of times to make sure there is no puddling. We also make sure our foam brush is not full of varnish.
Mike, I’m getting ready to fare my hull sides. Can you tell me where I can buy those adhesive sandpaper rolls you are using? Also, your faring long board. I need one of those too. Thanks sir!
You can get them on my website www.mgstudioworks.com it is an affilated link to amozon and it helps me out with about 2% of the sale going to the channel. If you need any help with information let me know.
Greetings from southern Ontario Canada 🇨🇦 thanks for the update on the wooden boats resortation, what's the cost to build a wooden boat from start to end I'm Ontario
Sorry, not sure I can give a price without knowing more details. We don't build custom or scratch built boats and restorations very a ton depending on size, make, model and year.
Great job
Great tip. Thanks
Thank you for the tips.
As weather (temperature & humidity) permits I am varnishing the top of my bait box & wet bar for my '65 Commander. I have been using Petit 2015 High Build and am quite satisfied with the product. I'm at 8 coats and needs scuff with 400 then 2 following coats of 1015. These prices are in the sun most of the summer even though I am in a covered slip.
Thank you again and yes I have a 3" putty knife with sand paper attached to it.
Good, helpfull Video! 🛠️✨ Thanks! Allways watching 👍🏻
Useful Tip!
good stuff thanks
Love your vids Mike!
Thanks Mike. The inside corner, coaming, cowling and deck at the end of your video, how do you varnish that? Are you able to do that with a foam brush without leaving a puddle/runs? Maybe that's a future video?
We use a 2 inch smaller brush and also go over that area a couple of times to make sure there is no puddling. We also make sure our foam brush is not full of varnish.
Mike, I’m getting ready to fare my hull sides. Can you tell me where I can buy those adhesive sandpaper rolls you are using? Also, your faring long board. I need one of those too. Thanks sir!
You can get them on my website www.mgstudioworks.com it is an affilated link to amozon and it helps me out with about 2% of the sale going to the channel. If you need any help with information let me know.
Greetings from southern Ontario Canada 🇨🇦 thanks for the update on the wooden boats resortation, what's the cost to build a wooden boat from start to end I'm Ontario
Sorry, not sure I can give a price without knowing more details. We don't build custom or scratch built boats and restorations very a ton depending on size, make, model and year.