So happy to see you back! It's really great to see you building cool stuff again. The number of supportive comments on this page is just amazing, it's so heartwarming to see this many people caring and sending well-wishes.
He know what he's doing he's acting like there's hurdles to make this work he knew exclusivamente how to make that don't u realize he's been doing this for a while
You went from a fast charge power brick to a bunch of tiny bricks that can only slow charge. The USB fast charging protocol negotiates power delivery to accept higher voltages when attempting to fast charge. The slow charge bricks have no negotiation and only charge at 5V, thus no matter how many slow charge bricks you used the time was always going to be slower than a single fast charge brick. The phone itself determines how much current it will/can accept, the brick can only say yes or no to its request.
@@Twisted_Biscuit you charge a LiPo with CC-CV method, never goes over a given battery voltage, so your limit is the maximum charging current in the CC state, which is already limited by the negotiation. Unfortunately, the rest of your power possibilities are not used here. But with USB pd standard you can go up to 5Amps. Scotty was right trying an extremely high Amp charging current, but delivered energy at 4.2V was 🔥 Edit: I'm just explaining the battery charging part. Of course, higher power delivered between the brick and the phone is used "elsewhere", like operating the phone 😉
Since he mentions the chargers are 1A, maybe they're just really old school 5V 1A chargers (would explain how he would've gotten loads of chargers for a reasonable price) And in that case I assume the old school chargers would top out at 0,5A if the data lines aren't hooked up, would explain how the charge time pretty much doubled
You hit the nail on the head when you said that you learn best when you are solving a problem, not reading a text book. As a self taught software engineer, I can say that many of us are the same way, which is exactly the skillset you need when what you learned in school is out of date within months or you need to learn to do something new that doesn't have documentation for your use case. You get bonus points for going through and soldering all those wires in the beginning knowing that it wouldn't work. A+ for effort!
I actually got very disappointed from this video, after seeing him build Iphone with USB C - I thought it going to be a true and functional build, not an clickbait for battery + iphone.
Oh how I've missed these meticulously and perfectly planned, filmed and edited videos. Stopped 1/3 through to write a comment, which I never find myself doing. But, I really see the love for what you do. Welcome back.
This was really cool! If I understand it correctly, you need to split up the LiPo battery into multiple cells so it won't overheat, then you can set the BMS to charge 0-100% in around 15 minutes without compromising the capacity.
@@kaukon not really it's about the voltage if you keep voltage high then your current to get same output power at low voltage will be much smaller And also it's 150W at 230V and it's using 2 bats in parallel can't find much info but it's probably 20V 7.5A charging
ngl I was expecting the multi-battery approach, since two half-size batteries cuts the time down by half, five fifth size batteries to a fifth of the time, and so on without sacrificing capacity. This works better tho because more batteries means more heat and more heat means more chance of going explode-y
The BMS uses the cell voltage to estimate the battery percentage. 4.2v would be 100% and ~3.5v would be 0% so since you’re putting a constant 5v it’ll stay there. Would be cool to try those cells in series and remove the step up just to see the bms report an accurate percentage
Scotty! I lost track of you on youtube a few months back. Great to see you again! Love your style! I plan to catch up on your brain health progress videos! Hope all is well!
Scotty, your channel is amazing and I’m so glad you’re doing well. My friends and I sat and watched a bunch of your videos, leaving us entertained for hours. You are incredibly entertaining and great at what you do! Never give up!
I'm staggered at how small that supercar is. I remember seeing early caps that were positively massive compared to their counterpart chemical batteries. The one you have in this video is only slightly larger than the lipo from the iphone. Amazing progress in that field. I'll have to do some reading about the materials.
@@drkastenbrot Even if it was half the capacity like stated in the video, that's still phenomenal. Aside from significantly faster charging times, capacitors have significantly longer lifespans measured in the hundred-thousands and some in the millions of charge/discharge cycles.
This one is a LIC (Lithium ion capacitor), which is more like a hybrid between lithium battery and a supercap. They are much more energy-dense than regular supercaps in exchange for shorter life cycle and lower maximum currents.
Super cool video! So glad to have you back to digging up these Strange Parts! I've been paying attention to battery and supercap tech for years, and I've never seen titanate batteries nor seen flat supercaps like you have here.
I didn't realize that battery capacitors could be so size efficient. I thought the disparity was much worse. Would totally take a phone that was twice as thick if it meant a few minutes of time to charge to full.
back with a vengeance damn, good subject good editing and looks like you've built an awesome setup there. Hope you're feeling yourself again now, great to see you smashing them out
It's great to have you back, Scotty. While it's a nice video to watch, it feels to me somewhat incomplete. Things that are important in my opinion that were left out: What is the normal voltage of a Lithium cell and how it changes with respect to the amount of change. How can the phone tell the battery percentage (it's not linear) What a battery protection circuit protects against (overheating, under voltage, over voltage, over current, short circuit...) Why you don't want to run a high current with low voltage through a wire, and that you would rather increasing the voltage to get more power using the same current, which is the base for many quick charging technologies. How you can connect batteries in series to charge to a higher voltage using a special IC that monitors the voltage of each cell in the series and balances the charge rate. Why you may not want to charge your phone as fast as possible (causes damage to the battery in the long term. I know you can't fit all of these ideas in one video, but without touching on some of the topics I've briefly mentioned, at least in a follow-up video, or mentioning that it's only a part of the picture, recommending other videos on TH-cam for further watching, so people wouldn't get the feeling that what you've mentioned is VERY complicated or that that's all there's to it.
@@MichaelFri Agreed. I've missed many of that stuff because I don't know and wished he went a bit more deep into the topic, nonetheless a very interesting video.
I strongly believe that this isn't a supercapacitor but a boosted up Lithium battery. Capacitors and/or supercapacitors have to stand incredible pressures inside, and that's why they are usually cylindrical. That's also why capacitors explode from the top. If this was a supercapacitor the cell would have bulged in an instant because of the pressure inside. It is layered like a battery, and it probably is. But according to this testing, it's a pretty juiced-up battery, designed to charge and discharge more quickly than other regular batteries. still impressive, tho.
Scotty, you are the segway MASTER! That sponsor segway was as natural as it gets. 👍 Great video (as always). Great concept too. Always fun on your channel my friend. Thanks again.
Great video! I really like your experimental trial and error process of modifying smartphones. They seem like a ‘black box,’ but are really just made up of smaller, simpler parts that can be swapped out, bypassed, etc. It’s very encouraging!
Atleast this video there's no triál an error he know what he's doing he was acting outside his garage bsing us "aww I was expecting a battery fire(he gives his act away) idk what I'm gana do continues knowing what hes doing he's just acting now
Keep exploring at brilliant.org/strangeparts. Get started for free, and hurry-the first 200 people get 20% off an annual premium subscription. Watch this video without ads on Nebula: nebula.tv/videos/strangeparts-how-fast-can-you-charge-an-iphone Lastly, if you get a reply to a comment asking you to text me on Telegram, it’s a scam. Report it as spam and ignore it. I’m working with TH-cam to try and deal with this in a more systematic way, but it’s challenging.
@Strange Parts i have a better solution so we have seen red magic 7 phone's and how they can charge with 165w and its possible becouse there using two batteries some other brands use even 4 batteries at a time so lets say each battery can charge at 61w maximum if we have 4 of those thats around 244w and it can still fit in a smart phone and charge in 6 minutes oppo have done it so why didn't you do it lol i gues thats a part 2.
Awesome as always i can say Strange Parts is my favorite channel on TH-cam! Everything you do is clearly with passion to improve and innovate keep doing what you do stay Awesome!
Well, I mean... you didn't really build an iphone that charges fast, you temporarily hooked one up to a battery that charges fast. I was kinda expecting it to be a self-contained thing that outwardly appears normal, ie a useable thing
Interesting but a bit disapointed I expected you to address how good smartphones can succesfully charge very fast now like we have 150W charge and some manufacturers are even pushing that number higher, you could have talked and showed us about how their batteries are made.... and actually I was also thinking you would integrate one of those multicell batteries and chargeboard into the iPhone.....
mad respect to you for doing that whole mission of a soldering job at the beginning even though you 100% knew it wouldnt do anything. its was a funny bit
I'm a Chinese fan of yours, I'm happy to see you continue to update the video, and I love the Apple phone modification series 5 years ago. We grow together.
for fast charging it needs data wire too by increasing amperes you can't fast charge a phone as fast charging is software based not hardware based so not connection the data wires the green and white wire don't trigger the fast charging software on your phone instead it will charge your phone by a normal charger phone
You could increase voltage as current drops, that would likely charge a little bit faster than keeping the voltage locked (I think, I'm no expert)! Personally I wouldn't mind a battery that lasts half the time but charges much faster. It would work out better in the long term if you could charge a battery in 10 minutes (albeit costing more in electricity). That said, it amazes me how Apple are still so far behind Samsung in terms of charging capability. I can charge my S20 Ultra in just about an hour from flat to full.
Makes it more impressive that OnePlus have had the Warp Charge 65T standard for a number of years now being able to do a 0-100% charge in under 30mins.
And here, ladies and gentlemen, we resume our scheduled programming. Love to see more Strange Parts builds :)
he didnt built anything, just tested batteries.
@@michellefernandez3155 he built the battery pack thingy and hooked up to the iphone ?
@@STANI420 hooked to an iphone is not the same as i built an iphone as he claims
@@michellefernandez3155 i think you just find out about Clickbait, everyone does it and has done it since the past 8+ years, get over it
@@hizutoff127 he never did it before, kid. look for his mainland China iphone build series
The advantage of the supercapacitor is that they can be cycled millions of times as apposed to lithium cells that loose their capacity quickly
The legend is back. Good to see you're doing good ❤ Thanks for brining some joy to a lot of us by being who you are
So happy to see you back! It's really great to see you building cool stuff again.
The number of supportive comments on this page is just amazing, it's so heartwarming to see this many people caring and sending well-wishes.
He know what he's doing he's acting like there's hurdles to make this work he knew exclusivamente how to make that don't u realize he's been doing this for a while
You went from a fast charge power brick to a bunch of tiny bricks that can only slow charge. The USB fast charging protocol negotiates power delivery to accept higher voltages when attempting to fast charge. The slow charge bricks have no negotiation and only charge at 5V, thus no matter how many slow charge bricks you used the time was always going to be slower than a single fast charge brick. The phone itself determines how much current it will/can accept, the brick can only say yes or no to its request.
Yes, agreed. I think I probably should have tried to explain that better. Your explanation is great though.
Apple has his own limits at max 2.4A, below the USB BC1.2 standard max of 3A.
@@oraszuletik yes but 2.4A at 5V is much slower than 2.4A at 9V or even 12V. I’d assume it’s 9V
@@Twisted_Biscuit you charge a LiPo with CC-CV method, never goes over a given battery voltage, so your limit is the maximum charging current in the CC state, which is already limited by the negotiation. Unfortunately, the rest of your power possibilities are not used here. But with USB pd standard you can go up to 5Amps. Scotty was right trying an extremely high Amp charging current, but delivered energy at 4.2V was 🔥
Edit: I'm just explaining the battery charging part. Of course, higher power delivered between the brick and the phone is used "elsewhere", like operating the phone 😉
Since he mentions the chargers are 1A, maybe they're just really old school 5V 1A chargers (would explain how he would've gotten loads of chargers for a reasonable price)
And in that case I assume the old school chargers would top out at 0,5A if the data lines aren't hooked up, would explain how the charge time pretty much doubled
You hit the nail on the head when you said that you learn best when you are solving a problem, not reading a text book. As a self taught software engineer, I can say that many of us are the same way, which is exactly the skillset you need when what you learned in school is out of date within months or you need to learn to do something new that doesn't have documentation for your use case. You get bonus points for going through and soldering all those wires in the beginning knowing that it wouldn't work. A+ for effort!
Great content!
The new studio takes the videos to a hole new level! 👍🏻
@@kalinke Sorry, English is not my native language 🙈🙈🙈
Can not stress how happy I am to see you making content again. Really happy to see you active again man.
I’m so happy you can make projects again!
Please never stop exploring weird projects
I actually got very disappointed from this video, after seeing him build Iphone with USB C - I thought it going to be a true and functional build, not an clickbait for battery + iphone.
The shop/studio is magnificent! SO stoked to see you back at it. Really cool idea for a video, but then yours always are.
i’m so glad to see this channel absolutely blow up over the years and to see what he can do with better equipment is insane
Oh how I've missed these meticulously and perfectly planned, filmed and edited videos. Stopped 1/3 through to write a comment, which I never find myself doing. But, I really see the love for what you do. Welcome back.
I'm so glad you're back! Love your videos and I hope everything is going well!
This was really cool! If I understand it correctly, you need to split up the LiPo battery into multiple cells so it won't overheat, then you can set the BMS to charge 0-100% in around 15 minutes without compromising the capacity.
I'd love to see you open a OnePlus 10T battery and see if it can be pushed further than the stock 125 watts.
Yeap, kinda crazy to think they got to that without these super caps or wires as thick as your finger
@@kaukon not really it's about the voltage if you keep voltage high then your current to get same output power at low voltage will be much smaller
And also it's 150W at 230V and it's using 2 bats in parallel can't find much info but it's probably 20V 7.5A charging
Xiaomi phones with 210w charger for 300$ :🙈
@@dan2800 for the non US model. Here we're limited to 125watts with our power being 110v
My idea is to stack 10 ontop of each other, and sure you have a thick phone but it also charges at 1250 watts
ngl I was expecting the multi-battery approach, since two half-size batteries cuts the time down by half, five fifth size batteries to a fifth of the time, and so on without sacrificing capacity. This works better tho because more batteries means more heat and more heat means more chance of going explode-y
I can't express how happy I am to see you back in your element creating again. Keep up the amazing content Scotty
Welcome back hope you are doing well and heal from the injury ❤
its great you made an iphone video again , your older iphone videos are etched in my mind
Great to see you back man keep it up!!
Never clicked on a video that fast
Same.
Oh wait.
You can call this spasm clicking
Same. 😂 😅
Love this guy. Found you on your viral iPhone with a headphone jack video and have been *OBSESSED* since. Nice to see u back!
The BMS uses the cell voltage to estimate the battery percentage. 4.2v would be 100% and ~3.5v would be 0% so since you’re putting a constant 5v it’ll stay there. Would be cool to try those cells in series and remove the step up just to see the bms report an accurate percentage
You monster! Soldering directly onto your cutting mat! 😂
Scotty! I lost track of you on youtube a few months back. Great to see you again! Love your style! I plan to catch up on your brain health progress videos! Hope all is well!
Scotty, your channel is amazing and I’m so glad you’re doing well. My friends and I sat and watched a bunch of your videos, leaving us entertained for hours. You are incredibly entertaining and great at what you do! Never give up!
I'm staggered at how small that supercar is. I remember seeing early caps that were positively massive compared to their counterpart chemical batteries. The one you have in this video is only slightly larger than the lipo from the iphone. Amazing progress in that field. I'll have to do some reading about the materials.
Yeah I remember the blue soda can like ones from Maxwell, remember those? That was about 2013. Really amazing progress.
The energy density does not and will never get close to chemical batteries. Still neat to have that new form factor.
@@drkastenbrot Even if it was half the capacity like stated in the video, that's still phenomenal. Aside from significantly faster charging times, capacitors have significantly longer lifespans measured in the hundred-thousands and some in the millions of charge/discharge cycles.
This one is a LIC (Lithium ion capacitor), which is more like a hybrid between lithium battery and a supercap. They are much more energy-dense than regular supercaps in exchange for shorter life cycle and lower maximum currents.
@@SaNjA2659 you also have to treat them like lithium batteries so you can’t overdischarge or overcharge them.
Finally he is back. Loving the new look and design.
Super cool video! So glad to have you back to digging up these Strange Parts! I've been paying attention to battery and supercap tech for years, and I've never seen titanate batteries nor seen flat supercaps like you have here.
Glad to see you back and healthy! Best wishes for this new chapter in your life! 👍🤓👍
I didn't realize that battery capacitors could be so size efficient. I thought the disparity was much worse. Would totally take a phone that was twice as thick if it meant a few minutes of time to charge to full.
Happy that you recovered completely and coming back to form. Expecting more videos from now on wards.
back with a vengeance damn, good subject good editing and looks like you've built an awesome setup there. Hope you're feeling yourself again now, great to see you smashing them out
Yay another strange parts video! 😃
Are there smaller super capacitors available, that you could fit inside the phone?
Very informative rechargeable battery science. I enjoyed this episode a ton. Keep learning Scotty. We enjoy coming along for the ride.👍🏼👍🏼
It's great to have you back, Scotty.
While it's a nice video to watch, it feels to me somewhat incomplete.
Things that are important in my opinion that were left out:
What is the normal voltage of a Lithium cell and how it changes with respect to the amount of change.
How can the phone tell the battery percentage (it's not linear)
What a battery protection circuit protects against (overheating, under voltage, over voltage, over current, short circuit...)
Why you don't want to run a high current with low voltage through a wire, and that you would rather increasing the voltage to get more power using the same current, which is the base for many quick charging technologies.
How you can connect batteries in series to charge to a higher voltage using a special IC that monitors the voltage of each cell in the series and balances the charge rate.
Why you may not want to charge your phone as fast as possible (causes damage to the battery in the long term.
I know you can't fit all of these ideas in one video, but without touching on some of the topics I've briefly mentioned, at least in a follow-up video, or mentioning that it's only a part of the picture, recommending other videos on TH-cam for further watching, so people wouldn't get the feeling that what you've mentioned is VERY complicated or that that's all there's to it.
@@MichaelFri Agreed.
I've missed many of that stuff because I don't know and wished he went a bit more deep into the topic, nonetheless a very interesting video.
Remember when this guy whent mega viral on Reddit. And now here he is! I'm so proud of being an early sub.
Great video, it would be cool to see if you could weld steel with your 100 parallel chargers (100amps)!
Happy to see my fav youtuber and channel back up. Great vid
Amazing to see how much supercapacitors have progressed over the last 10 years. And I'm glad Scotty is doing well
I strongly believe that this isn't a supercapacitor but a boosted up Lithium battery. Capacitors and/or supercapacitors have to stand incredible pressures inside, and that's why they are usually cylindrical. That's also why capacitors explode from the top. If this was a supercapacitor the cell would have bulged in an instant because of the pressure inside. It is layered like a battery, and it probably is. But according to this testing, it's a pretty juiced-up battery, designed to charge and discharge more quickly than other regular batteries. still impressive, tho.
I vote for 9 mins charge but last half as long. Thanks for the video! love this channel.
Scotty, you are the segway MASTER! That sponsor segway was as natural as it gets. 👍
Great video (as always). Great concept too. Always fun on your channel my friend. Thanks again.
*segue
Hope you’re doing well now! Great to see more content here!
Such a high quality video ! Well done :)
Huge jump in quality at the new studio, glad to see new strange parts 😁
We miss this insane content that you give all the efforts you can!
Welcome back! We missed you
Great video! I really like your experimental trial and error process of modifying smartphones. They seem like a ‘black box,’ but are really just made up of smaller, simpler parts that can be swapped out, bypassed, etc. It’s very encouraging!
Atleast this video there's no triál an error he know what he's doing he was acting outside his garage bsing us "aww I was expecting a battery fire(he gives his act away) idk what I'm gana do continues knowing what hes doing he's just acting now
Holy cow your channel has grown so much since the last time I was here!
I’ve never clicked on a video that fast…
Finally a new video after ages❤️
At first i thoughtyou disregard the ohms law and the cc-cv charging method but you proved me wrong. Awesome job
Keep exploring at brilliant.org/strangeparts. Get started for free, and hurry-the first 200 people get 20% off an annual premium subscription.
Watch this video without ads on Nebula: nebula.tv/videos/strangeparts-how-fast-can-you-charge-an-iphone
Lastly, if you get a reply to a comment asking you to text me on Telegram, it’s a scam. Report it as spam and ignore it. I’m working with TH-cam to try and deal with this in a more systematic way, but it’s challenging.
Scotty always delivering what apple is unwilling willing to you should try to do some collabs with Linus and his new lab team
why would ever need harmful fast charging when you can just simply keeping charging all the time by using wireless battery bank !!
THE RETURN
@Strange Parts i have a better solution so we have seen red magic 7 phone's and how they can charge with 165w and its possible becouse there using two batteries some other brands use even 4 batteries at a time so lets say each battery can charge at 61w maximum if we have 4 of those thats around 244w and it can still fit in a smart phone and charge in 6 minutes oppo have done it so why didn't you do it lol i gues thats a part 2.
Please make a Vlog channel.
Awesome as always i can say Strange Parts is my favorite channel on TH-cam! Everything you do is clearly with passion to improve and innovate keep doing what you do stay Awesome!
you didn’t built an iphone charges in 9 mins you just charges a super-high priced super capacitor in 9 mins
It's great to see you back Scotty!
Well, I mean... you didn't really build an iphone that charges fast, you temporarily hooked one up to a battery that charges fast. I was kinda expecting it to be a self-contained thing that outwardly appears normal, ie a useable thing
So good to see you back! Keep doing what you love and best wishes from the UK!
Came from tiktok, need links from there my guy might get more subs
This channel brings back "iPhone 7 headphone jack" memories. I love this guy and the channel.
There was no need to destroy 100 cables just for that. So wasteful
exactly, and the worst part is that he knew it wouldnt work and he also could just simulate the same thing using his fancy device
Good to see you back up and running Scotty. Wish you all the best with your recovery.
Could you install a 13 Pro Camera in an iPhone 13 Mini? I love the Mini form factor but need the Pro Camera.
Missed your videos, welcome back!
Interesting but a bit disapointed I expected you to address how good smartphones can succesfully charge very fast now like we have 150W charge and some manufacturers are even pushing that number higher, you could have talked and showed us about how their batteries are made.... and actually I was also thinking you would integrate one of those multicell batteries and chargeboard into the iPhone.....
mad respect to you for doing that whole mission of a soldering job at the beginning even though you 100% knew it wouldnt do anything. its was a funny bit
Whose here after seeing on tik tok💀
Right here
I'm SO HAPPY watching you healthy!!! Hope you are doing well !!!
I'm a Chinese fan of yours, I'm happy to see you continue to update the video, and I love the Apple phone modification series 5 years ago. We grow together.
for fast charging it needs data wire too by increasing amperes you can't fast charge a phone as fast charging is software based not hardware based so not connection the data wires the green and white wire don't trigger the fast charging software on your phone instead it will charge your phone by a normal charger phone
Hey Scotty, great to see you back filming again. Hope you're feeling much better and I can't wait for more content
Great to se you back
Try to make a video regarding increasing the battery capacity of the iPhone it would be great
Glad to see you're doing good, and glad to have you back!
Oh my god. I was waiting for a long time to see a new video from you.
Nice video as always
Great to see you back in action, Scotty! Keep doing what you do best!
Been a fan of your since you build your own iPhone adventures, love you Scotty
I am so glad you are back and appear to be doing well! Let’s go!
So glad to see you back, up and running
1:43 hahaha, mind blown, what an awesome set up, awesome bloke :)
I am certainly not the only one, but Scotty we are glad you are back making videos. You were missed during the downtime.
You could increase voltage as current drops, that would likely charge a little bit faster than keeping the voltage locked (I think, I'm no expert)! Personally I wouldn't mind a battery that lasts half the time but charges much faster. It would work out better in the long term if you could charge a battery in 10 minutes (albeit costing more in electricity).
That said, it amazes me how Apple are still so far behind Samsung in terms of charging capability. I can charge my S20 Ultra in just about an hour from flat to full.
I am so happy to see you back Scotty. Your new video made a very big and clear smile on my face.
I'd love to see a phone with a hybrid approach, or maybe a phone accessory/case.
Nice to see you back IPHONEGUY
Man, I’ve really missed your videos. You’re such an inspiration.
You've come back stronger and better than ever! So happy to see you again :)
Yeah, Scotty is back cracking open iPhones again!
Nice explosion containment pie dish there, buddy :D
Legend has it, the slick electronic music continues to this day
I'm glad you're feeling better and that you're back 🙏
Glad to see you back, alive and healthy! I love your room and setup you’ve got.
It's great to see you doing well health wise and making great content again. Let's go man!
This is the type of content we all originally came here for. Glad to see you healthy and at it again.
“I didn’t want to spend too much money” *pulls out 100 chargers*
Fantastic to see you at your old antics! Glad you're doing well!
Finally a great strange parts episode to nice again. Missed the China type ones
I can't convey how happy I am to see your smiling face back in my subscription feed. Hope all us well for you and you're health is improved. ❤
We really really missed you man. Great to see you back
i love the amount of engineering there is behind simply putting power into a battery
Phone disassembly bits are fantastic
now he doesn’t need a 30W charger adapter anymore lol
Makes it more impressive that OnePlus have had the Warp Charge 65T standard for a number of years now being able to do a 0-100% charge in under 30mins.
im glad ur back , ur my driving force on fixing phones