SUNDOWN 18s on 16,000 Watts Part 5
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Link to the HUGE 16,000 AMP!
bigjeffaudio.c...
Link to the Marts 2000.4
bigjeffaudio.c...
Link to the INSANE Sundown X Series Subs!
bigjeffaudio.c...
Make Sure to Check Out Today's Sponsor, Alphard Audio!
alphardaudio.us
Link to the TX Speakers!
bigjeffaudio.c...
Link to the Super Tweeters
bigjeffaudio.c...
Support the basshead family by checking out my affiliates!
D4S: lddy.no/108an
BigJeff: bigjeffaudio.c...
CT Sounds: www.ctsounds.c...
Check Out My Socials!
IG: www.instagram....
FB: / parker-the-basshead-of...
![[TH] VALORANT Champions Seoul - Grand Final - EDG vs TH](http://i.ytimg.com/vi/WvObMc9VelI/mqdefault.jpg)
For terminals I use all thread. Drill a hole slightly smaller than the all thread and screw it in. With the all thread you can make them as long as you want. Use two nuts and a washer on the inside and a nut a washer and a wing nut on the outside.
I use acorn nuts on the outside. Makes for a more finished look. 😊
@@RJSDZNS I like the wing nuts. Makes removal much easier.
@@wijibo6772 I will not argue that sir😁
I like lock nuts because the massive bass doesn't rattle them loose.
Just wait till you got them broken in
Those are used, fully broken in they got spider sag
@@ChaosTherapy719 😂😂😂😂
@@ChaosTherapy719Spider sag???????? Hehehehehehehehehehehehehehehehehehe lmao!!!! XD😭😭😭😭😭😭😭😭😭😭😭😭🤣🤣🤣🤣🤣🤣🤣🤣
@@Terranwilliamson1745 what's hilarious is y'all don't pay attention for shit lmao Parker as soon as he bought the 18s said he got em used 🤡🤡🤡🤡🤡
I don’t think sundown you have too break in correct me if I’m wrong but I think they be breaking them in at the factory and you can slam on them when you get it
Your box don't look much different than the custom box I spent a decent amount of money on lol. Good job man!👏👏👏
Hey, use rubber grommets on the inside and outside of your box speaker terminal bolts. I always recommend this they aren't expensive and they keep your box from getting pressure squeeze marks and it's just a little extra protection just in case.
When painting MDF: mix white glue with water (or wood glue with water) and brush onto box with a chip brush, allow dry time, then paint. It will seal the pores in the wood so the paint/stain doesn't soak into the wood, leaving a dull finish. I didn't come up with this trick, but have done it and can confirm it works.
Yessirr I got 6 18s now but started out with 15s and 18s just take lows so much better👌
Mine only wants to hit lows 🤧
@@joshjorgensen2002 yessir we love air movement!!
WOW that's awesome Parker simply banging love your channel and work truly inspirational
Thank you man!!
Man that’s awesome! I’m sure they’ll perform even better when broken in. Thank you for the build vids Parker.
Good stuff man! You’ve came a long way, keep up the awesome work. Bass on bro!
PARKER THE BASS HEAD has done it again.. Keeps me coming back week after week.. So I am guessing you are also loving the new Marts Amps also???
Yessir doing a great job!
Shit looks and sounds good brother. Can't wait to see what it meters. Love your channel.
Enjoy watching and learning from you videos! Always clean setups
Just had a customer order from Big Jeff audio. He bought that exact five channel. I called them on the phone to confirm that item was in stock they were extremely polite and Very quick delivery! Jeff Audio for the Win!
Wow!! I love it 💯 It's loud and your box looks amazing 😃
I've never owned 18s, had 4 JL w7s 13s and 4 JL w6 10s in a 2001 eclipse gt. Had 2 kicker 15 L7s in another vehicle, but 15s are as large as I've went. I've seen people running larger subs for comps, but for my daily drivers, I've personally never seen the need. Thank you for showing them to us though. Very useful and interesting info. Thank you for your generosity and the opportunity 🙏, stay well and be safe brother.
Making me miss my old setup watching this build, zv4 18's two Ampere 3800's strapped at 1ohm. Thanks to your channel and some others I'm dipping my toes back into audio after years wish my wallet luck lmao
Looks Beautiful Parker!
I appreciate you!!
If you still get whine after swapping out your rca cables then try to either ground the rca's negative to the vehicle itself or if still hearing it then get yourself a cheap ground loop isolator they usually eliminate all motor static interferences....
I'm pretty sure this build can do over 150 db Very easy. Good job. I love 18s 👍🔊🔊🔈
He sucks so bad watch it only be like 148db lol
Looking good. 👍👍
I like the look of bigger subs.
Damm bro that's one hell of a set up hopefully one day I can meet u in person great content keep up the great work
Lol the fire extinguisher, this is how a true bass head plays it safe
Man I'm a big fan of your I've learned a lot from your TH-cam channel
That's right Parker!!! Love your content. Hate when ppl talk bad on your channel like they know better or do better or can provide better. But yet I don't see no channel being made by them so they still hating from the sidelines crying with their Sony Xblows!!
Exactly! I appreciate you man!
There is some wire look that is specifically made for RCA wires. It helps block the interference.
Exciting to see this coming to a completed build..
I can already see in the very near future your bubble is going to pop and it will be a 4 18s wall build..on 2 marts 16ks
Done both and have been a subscriber since the beginning yo!!!
My man!!
@ParkerTheBasshead bro just wait till ya really push them . Seems like you are being a bit nice with them bud.
And look at the knukonceptz crystal series rcas I have them in my truck and the rca cables are right next to the power and no whine at all.
18s are my dream and hopefully one day I can reach that goal 🙏🏼
Yep I can't wait to see what numbers it does once you got it dialed in great video my man this is the content that I login for
Thanks Parker and big jeff.
Yessir!
Awesome another banger parker
You also gotta remember you're so dealing with Sundown now, and 18's at that 😎
I have Love for the 18” sub my whole life. My 1st build was (1) the Punch 15” sub with the Punch 45 and my 2nd build was also in my 89’ Honda CRX was (1) the Punch 18” sub and my the Punch 150 which was “Awesome” for the time in the early days and I built my single 18” enclosure in Votech carpentry 1 class in high school sophomore year on some of the finest shop equipment money could buy. Best looking enclosure I’ve ever built and I did fab “MANY” in High School (9-10 grade Carpentry 1 / 11-12 grade Carpentry 2 ) as my Legal hustle, I built boxes for the entire school & community known as the Enclosure King or “the Box Guy” putting all the local shops out of work in their shops on their enclosure builds because this was before pre-fab boxes. I built anything from (1) single sub enclosure to (8) 15” subs in bed of mini-trucks with snug tops, I made a small fortune in high school on subwoofer enclosures for 4 years in the “ Bass Beginnings” having a state of the art wood shop at my leisure at my Vo-tech. I started out with high end gun cabinets for guys and China Hutches for women and when subwoofers hit the South I never looked back! Rules were I had to turn in a Complete drawing for a grade & people had to provide ALL materials and deliver ALL materials on site (wood, screws, glue, carpet or paint) and my teacher was so cool telling me did Not want to see any money being exchanged at school. I took alot of time & I was REALLY proud of this slanted 18” single enclosure painted in black with neon splattered paint. After all this was the 80’s and it was a big hit at the time instead of carpet! I had a friend from local electronics store (Hooper’s Electronics) that worked out All my enclosure volume for sub sizes that was a mathematical genius so we had a winning combination as a team for I was the builder and I sent all my customers to him to buy Alpine, Rockford Fosgate ( the Punch), Kicker(subs only back then), MTX( the Red Terminator Series Amps & subs 🔥) & Linear Power was All the Rage back then!#thePunch#”80’sBestofTimes”#🔊@ParkertheBasshead
Don't open that Dr Pepper! ROFL!
I be watching all your stuff parker shit u be doin some Kool stuff
I have a single 18 And that makes me Tap out. So Honestly 2 18" subs is a whole different monster
Keep kicking bass 💪🏻💪🏻
Will do!!
Would suck if the Marts amp is the source of the whine...
Probably is. My Mart’s and Expert Electronics (same company it seems by the design and manuals) we’re identical and both caused hissing and whining in my system. They can’t take over 1.9 volts of RCA input or they cause a dirty clipped signal on every output.
Come on parker... always seperate power and ground from rca's. One the first things we learned.
That skar joke had me cracking up😂😂
Hahahaha good!
Nice give away. Big Jeff really stepping up!
More great Content! Keep work’n man!
Parker, use 0000 grade steel wool from a hardware store and use that to hand polish the box, it will make the finish smooth
I remember when Parker started his channel and mfkrs would troll him because of his low budget builds. Look at him now! Congrats Parker love your builds and content
Going to upgrade to 4 15s once I can find a box builder in Kentucky
You are loving the basshead dream!
The enclosure looks very, very nice! 👍
time for the great moment🔥🔥🔊🔊
Insane build my man lol
Looks good Parker 👍😎
Hey Parker, nice build. When you get a chance can you give a demo playing Young Jeezy- Hypnotized and Gucci Mane Ft. Oj Da Juiceman- Stealing, Those songs slap super hard👍💯
Sounds Brutal... got the fire extinguisher 🧯 shaken
If he doesn't dead short another sub.. should be no need. 😊
I had solo x 18 when I was like 20 something wish I never sold
Yeah they are awesome for sure
on boxes i always make terminals like these, imo the best and cheapest way to make proper terminals...just i mark them by painting the ends of the bolts with red and black colors
Your smile says everything we need to know 😅 its a beast!.
Ive been waiting for this giveaway to actually happen😭
LOOKING AWESOME 👍👍👍👍
Looks similar to my box for my 12s lol! Nice!!
I love that amplifier
I just had a scammer use your channel to try and get my bank information.
Rock on parker
Love the box!!!
Love your videos i have learned alot from you nice and clean wiring and hits hard
That’s crazy your happy thst 2 18’s floated a napkin. I was actually thinkin it would be more. I had 2 skar zvx12’s on a smart 3 a sub and I floated better. I feel like there could be more wind
Parker, have you ever done a video on building the loudest system only using the factory electrics (alternator and battery) ?
He made a video about how loud 1000 watts can get which is basically all you can get from factory electrical
Sick af parker
Awesome, The Big 18” Beast sub and it’s a Sundown to boot! I’d Love to have two Sundown 12” DVC2 with a pair of Down4Sound’s JP8s slaved on each sub because I ended up buying 2 when they were on sale!#Down4Sound#JPAmps#JP8🔥🔊
I had two Skar Evl 18s in my Tahoe and I thought that was loud😅 but your System definitely sounds good.
Damn this goes hard!
I have 1 18 in a hhr pannel in a 7.4 cube box. Under powered but still nasty
Grounding your rca outputs from behind the radio fixes that whining.
Awesome video. As usual. Buy why sundown & not deaf bonce 🤔 4518r😂
I would have loved to run those 4518Rs! But I got these sundowns locally for a great deal
i love this build !!! i have a slight feeling of envy LOL... well ALOT .. lol.. ugh, i want this soooo bad !!!!! congrats on your awesome achievements and work , dedication parker your the MVP.. also thank you to BIG JEFF YOU sir are LEGEND !!!!
Envy is really bad. Work hard and save your money and you can have anything you want. Parker just didn't wake up with (2) 18's.... He's been putting out videos for a few years now. He's earned and worked his way up to what he has. But like I said if you have envy work a little harder and make some more money you'll be in the same spot in no time
@@PeterFeltersnatch852 envy isn't always a bad thing/..also you sir are diving wayyyyy to deep, dont overthink things or assume... :)
also never gloat
You should review the new H series from Trinity audio.
I personally don't care for the simple poke bolts out the side of the box it looks kinda cheesy but here's a terminal tip, which is take a 4" or so hole saw and put a hole where you want your terminals router a radius on the outer edge looks nice and then attach it however you choose over the hole on the inside then put your bolts through, not only does it look less "ah whatever good enough" but it also recesses your bolts so if it's on carpet not sitting on a hard surface you could lay the box on that side if you change your mind on where to aim your subs or just to hide the terminals. Trust me it looks way more professional than diy.
Just tie a knot in the wire then feed it through a hole in the box. No chance of ruining the carpet, and you get no change in wire diameter from a terminal block or bolt.
Jus an observation, but aren’t those recones? They look like they have spl surrounds, besides that love ur videos keep do’n ur thing
parker you rule the earth! you should start going to the gym with JP. all he does is chest, bi's & tri's 6 days a week. he'll beef you up
4 --18s? Then maybe that whole door will come off lol
Cant wait to upsize myself
the more coats of poly the better the gloss will be enough coats and it will look like a piece of glass on top
I really could use a 5 channel amp. Love deaf bonce when I got back into car audio a couple years back from watching YOU and EXO, JACOBVIRAL and I saved and bought a full deaf bonce apocalypse setup.
Nice system 👍
Does anyone have RE Audio anymore? I'd love to see some of those old subs put to the test. My 12's have been going strong for like 15 years
Dat bit beaten!!
Sounds like hurricane in after my house 😂😂😂😂
Now you just need 2 more 18s 😂
Exactly!
Sounds good so far on headphones
Nice job
I did my box the same color
💪🏼💪🏼
After I finished building my 2 custom D2 400oz 15s that are now at half ohm on my cab45 on lithium I had a small chip on the bottom of my windshield from like 5 or six years ago that's lived through the pretty decent setups ive had but after a couple days of the new setup my windshield cracked all the way to the top. I have Mixed feelings on that one it sucks my windshield is toast but the idea my subs cracked it from the bottom to the top is pretty cool. It does flat out slam now but I'd say the reason it cracked is it's a grand caravan so the windshield frame flexes big-time and it was chipped already so it's not because subs are so insane it broke my windshield...
We have BASSSSSSS!
Let's see some Defbonce. I want to see. If the smaller motors.can still.hit hard. I like EDM.
Dude in the future if your going to take the time to build a pretty box, instead of a black sharpie use a red and black paint pen to mark the ends of the bolts. Looks way better! Great job on the box my dude!
Nice
you should do 3 or 4 18s
I can't stand the rattle trap stuff. I used double seals on .y hatch lid and it helped a whole lot. Definitely gotta use rubber on that license plate as well. It made my hatch hard to close but no more rattles!😂
Big subwoofers
You should try upchurch hydias 7
Might be the amp. Marts equipment causes whining/hissing in my experience. Had one of their DSP’s. Had to get rid of it. Expert Electronics does the same thing.
I bet that enclosure with the subs installed is a mfr to move. My back is hurting just thinking about it.
Parker you certainly could have done more to ensure the box had better fliw like rounding over the edges of the port sides kind of mimicking a kerf or even actually kerfed them inside and out and use 45's on each inside corner and then for $20 you could get a SMD terminal that looks alot better than a couple of shiny bolts lol this box was absolutely rushed and it shows them woofers deserve better
I will msg you some cut sheets and a box design for two 18's that will get the most out of these whether you choose to use it and build a proper box or not is entirely up to you bud....
Where would I find the box specs, to build that box