Perfect video brother. Straight to the point, enough detail but not too much, enough demonstration but not too much. Gotta do this tomorrow. Thanks man.
I really like how you show everything up close ,breaking it all where the average person or someone not to familiar with woodworking can really understand and get it done, great job thanks.
Nice job! You ‘ Nailed it ‘. TY still waiting on help to build, home with Lung Disease from COVID-19. I have two Support Dogs, my back porch has no gate door😔.. All wood deck no gate door. Single prior Healthcare Worker that’s how I caught COVID, no more COVID but severe complications Lung Disease.
Excellent tutorial!! Should have watched before I tried to cut angles for my first gate cross brace🥴…oh well that lesson only cost me a 2x4 & a visit to the confessional 😉🙏 Thanks so very much for sharing your knowledge.
I literally rewatched a few times to take notes. I’m building a gate to keep out dogs, I’ve never built anything before but I’m tired of waiting for someone else to do it. Next I need to fix a door. Lol dogs kinda ate the bottom.
Thank you so much for this! I have very similar setup as you. Followed this perfectly. Can you make a sliding rail gate for the same type of deck you have?
Yes, one screw in each probably would be a good idea. Plus I would consider (or ask customer if this is a job) if they would like a top rail on the gate that matches the rest of the fencing. Done very well.
Great video! Quick question please. I went and measured my width on my deck stairs and the bottom measurement was a quarter inch shorter than the top. Top was 42.75”and bottom was 42.5”. How do I approach this? Thanks.
Make it to the smaller size the 42.5" Or just split the difference, we don't build stuff out of square, (unless on a boat or special reason, split difference or build smaller size... usually split difference 🥸
Idk i like it when my top and bottom rails line up.. the total shortness aswell as the short balusters are messing with my eyes, its not pleasant in my opinion.
Where are at. In Canada it is illegal to have a gate or a door at the top of stairs. The building code also says. The spacing between balasters are to be so that you can not pass a 4"ball between. That means that the spacing needs to be less than 4" . Not 4" between.😮
When tu said 4", I thought 3" that ,7 I had to learn from experience, tu like my US Navy Sea Bee playlist for Enlistedman and Officers who are motivated to rank up on ytb videos by CIA O29 US Navy Seal Devgru 6 SWCC Officer O19 Kaiser Tsar Matthew Floyd Marston Romanov Windsor 2 Rothschild Rockefeller Cartier 2
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 59 [ซับไทย]](http://i.ytimg.com/vi/GmW4a8prWUQ/mqdefault.jpg)
Perfect video brother. Straight to the point, enough detail but not too much, enough demonstration but not too much. Gotta do this tomorrow. Thanks man.
Thank you for the video! My husband and I built and hung 2 gates for our deck over the weekend using these steps. It was super easy to follow!
I really like how you show everything up close ,breaking it all where the average person or someone not to familiar with woodworking can really understand and get it done, great job thanks.
Just finished. Great video.
Thank you so much for this video. It’s super helpful and easy to follow with less talking and more showing!
Great job with presentation. Clear and concise. Just what I needed for the finishing touch for my deck. Thanks!
Nice job! You ‘ Nailed it ‘. TY still waiting on help to build, home with Lung Disease from COVID-19. I have two Support Dogs, my back porch has no gate door😔.. All wood deck no gate door. Single prior Healthcare Worker that’s how I caught COVID, no more COVID but severe complications Lung Disease.
Good work. Great instructions, especially on the spacing.
Excellent tutorial!! Should have watched before I tried to cut angles for my first gate cross brace🥴…oh well that lesson only cost me a 2x4 & a visit to the confessional 😉🙏 Thanks so very much for sharing your knowledge.
I literally rewatched a few times to take notes. I’m building a gate to keep out dogs, I’ve never built anything before but I’m tired of waiting for someone else to do it. Next I need to fix a door. Lol dogs kinda ate the bottom.
Mission Accomplished! Just finished our gate and it worked perfectly. Just need to make one more.
Great job, you make things look so easy&your easy to understand
Great help!!! Thank you from a novice gate builder!
Very easy to understand and I am for real, just about to get around to doing a wooden gate. A great Find this vid. 👍
Nicely done. easy, simple and very detailed. keep up the great work brother. thanks
Thanks man , never understood how to get even spacing
Just built this using picket fence boards instead of deck styles. Only took a couple hours to build and hang. Thanks!
Thanks so much for the video! It worked like a charm!
Nicely done. Exactly what I w was looking for!
I sure wish utube doesnt put the writing it gets in the way. Great posts
That’s an easy fix. If you tap the video and click “cc”, it will turn them off. Hope that helps.
Even spacing is as easy as find the middle and space evenly as you work out from the middle. Always a different way to skin a mushroom
great job new to the channel now Im going to try this.
Thank you so much for this! I have very similar setup as you. Followed this perfectly. Can you make a sliding rail gate for the same type of deck you have?
Great job, only thing I would change is the height.
The reason we made it low is for the kids coming up the stairs. They can reach over the gate and open the latch!
Only thing i'll say is that at the very least youll want to angle the cut on the top of those balisters.
Great video man. Planing to do one😊
Im about to build me a gate now thanks to your help Sir 😎😎
Nice job Sam help me out building my gate.
looks very good 👍
Good Video. I use a fraction calculator on my phone. Occasional ad, but helps me a lot!
Good job ...Thanks
Very nice professional
Would help to fasten each balister to the cross brace.
Yes, one screw in each probably would be a good idea. Plus I would consider (or ask customer if this is a job) if they would like a top rail on the gate that matches the rest of the fencing. Done very well.
What size countersink bit did you use?
A crazy question one could make the rails recessed for less thickness but extra work.
How did you screw the bracing?
Hi Sam I'm 63 and I think I can do it thanks
Great video! Quick question please. I went and measured my width on my deck stairs and the bottom measurement was a quarter inch shorter than the top. Top was 42.75”and bottom was 42.5”. How do I approach this? Thanks.
Make it to the smaller size the 42.5"
Or just split the difference, we don't build stuff out of square, (unless on a boat or special reason, split difference or build smaller size... usually split difference 🥸
I'm going to try this myself ....
For a wide porch staircase, would you just build two gates and have them latch in the middle?
Yes or put a wheel on the bottom of latch side of gate.
Awesome video! Very informative.
Thanks
Does one need the diagonal cross board? Is there a purpose for it or can someone skip it?
... And cheaper
Rarely is an opening square on a deck
👍👍
Idk i like it when my top and bottom rails line up.. the total shortness aswell as the short balusters are messing with my eyes, its not pleasant in my opinion.
Where are at. In Canada it is illegal to have a gate or a door at the top of stairs. The building code also says. The spacing between balasters are to be so that you can not pass a 4"ball between. That means that the spacing needs to be less than 4" . Not 4" between.😮
... that code makes no sense, wouldn't you want to prevent a accidental fall down the stairs by installing a door?😂
Better if it was level with the top part.
When tu said 4", I thought 3" that ,7 I had to learn from experience, tu like my US Navy Sea Bee playlist for Enlistedman and Officers who are motivated to rank up on ytb videos by CIA O29 US Navy Seal Devgru 6 SWCC Officer O19 Kaiser Tsar Matthew Floyd Marston Romanov Windsor 2 Rothschild Rockefeller Cartier 2
Muita conversa
ffs three and eleven sixteenths! Just go metric will ya?!!!!
Ew.
Screws, no way bro.... its ugly try some better joinery. 😢