Buenas señor, tengo una FX Impact MK2 quiero ponerle el regulador y la válvula de la botella para que me quedé regulada, sabiendo que no queda con el manómetro de regulación se puede montar la válvula de la botella y el regulador a la mk2???? Gracias
I hate to say it but I already told fx the easy way to install the pin ,I installed it without removing the valve but degassed. If you have a Huma bottle fill adapter you can get the adaptor started on the pin then screw your Huma battle adaptor on and itll push the brass bushing right on ."done"
Mr Ernest what is the reason to upgrade the bottle pin if regulator will not fit to MK2??? You guys are professional and other expert of FX said regulator from MK3 won't fit to MK2 so what the point upgrade bottle 🍼🍼🍼??
Was hoping for a definitive answer from the manufacturer since it seams logical to avoid unnecessary stress to the vessel but... they transport oxygen tanks to remote locations at full pressure and there at or above the same bar we are running although I don't know the max range of an oxygen tank compared to our much smaller bottles... 250 bar max is the guns rating I'm assured the bottles can withstand 300-350 bar with absolutely no problem as part of there safety requirements... but who knows not me just an educated guess at this point here's to hoping someone with more knowledge will chime in and let us know for sure! Thanks for sharing!
@@jackdaniels7913 if you ship ammo ,spraycans ,tanks with high pressure you need a certificate . if you want to know the latest rules ,ask a airport or surf there on the website for the rules.
if you weigh the same empty bottle ,and a filled one there is a weight difference. a cubic meter (1000 liter) is plus minus 1 kilo ,in a 500 cc bottle can be at 250 bar plus minus 125 liter is plus minus 125 gram xtra
Does this mean that the M3 first stage regulator can be installed in the MII and I can get my old bottle converted to the new valve pin and use it on the converted MII?
@@edwinsanjaya5575 when I purchased my MK2 I didn’t know the M3 was out ! My supplier let me down when I called them to place my order , they could have mentioned it , I would have definitely bought the M3 ! The schematic for the M3 is so much better than the Mk1 & Mk2 , also they made changes on the valve rod & valve house on the MK2 generation 5 , I found that out when placing my order for an o-ring kit , they kept sending me the wrong kit , the US headquarters sent the wrong valve rod twice , it took them 3 weeks to finally make it right , I’m still waiting for a refund !
Why is it IMPOSSIBLE to find and buy a complete valve assembly for a M3 bottle? So frustrating. You invest nearly $3000 on a rifle and accessories and then can't buy something as essential as a bottle with the correct valve already installed or a valve to install in a bottle. Come on guys!!!!
Buenas señor, tengo una FX Impact MK2 quiero ponerle el regulador y la válvula de la botella para que me quedé regulada, sabiendo que no queda con el manómetro de regulación se puede montar la válvula de la botella y el regulador a la mk2????
Gracias
I hate to say it but I already told fx the easy way to install the pin ,I installed it without removing the valve but degassed. If you have a Huma bottle fill adapter you can get the adaptor started on the pin then screw your Huma battle adaptor on and itll push the brass bushing right on ."done"
Can a bottle be installed without the valve?
Mr Ernest what is the reason to upgrade the bottle pin if regulator will not fit to MK2??? You guys are professional and other expert of FX said regulator from MK3 won't fit to MK2 so what the point upgrade bottle 🍼🍼🍼??
Do you need to depressurize the tank / bottle before shipping / air transport for service / travel?
🥃cheers🍻
i think so
Was hoping for a definitive answer from the manufacturer since it seams logical to avoid unnecessary stress to the vessel but... they transport oxygen tanks to remote locations at full pressure and there at or above the same bar we are running although I don't know the max range of an oxygen tank compared to our much smaller bottles... 250 bar max is the guns rating I'm assured the bottles can withstand 300-350 bar with absolutely no problem as part of there safety requirements... but who knows not me just an educated guess at this point here's to hoping someone with more knowledge will chime in and let us know for sure!
Thanks for sharing!
@@jackdaniels7913 if you ship ammo ,spraycans ,tanks with high pressure you need a certificate . if you want to know the latest rules ,ask a airport or surf there on the website for the rules.
No. Though you could.. I would not recommend doing so.
Will the new bottles fit the old guns like Crown?
Yes, new bottles still work with previous rifles
@@FXAirguns thank you
Is it possible to fit a bottle reg on your fx crown or it wont work?
if you weigh the same empty bottle ,and a filled one there is a weight difference. a cubic meter (1000 liter) is plus minus 1 kilo ,in a 500 cc bottle can be at 250 bar plus minus 125 liter is plus minus 125 gram xtra
Um equipamento esplêndido sempre vídeos excelente um sucesso merecido você merece um sonho desejo muito mais sucesso like garantido sempre
Does this mean that the M3 first stage regulator can be installed in the MII and I can get my old bottle converted to the new valve pin and use it on the converted MII?
M3 regulator won't fit into MK2 due to sizing. It had to be built larger in order to make everything work.
@@FXAirguns question is it can be done or not???
@@tkielek24 No, the MII would need to be machined, and I don't know if there is enough room for the regulator.
Huma will make a regulator kit to convert the MK1 & MK2 , watch !
why dont they make converter from mk 1 to m3 , why still make mk2 when 3 is out there?
@@edwinsanjaya5575 when I purchased my MK2 I didn’t know the M3 was out ! My supplier let me down when I called them to place my order , they could have mentioned it , I would have definitely bought the M3 ! The schematic for the M3 is so much better than the Mk1 & Mk2 , also they made changes on the valve rod & valve house on the MK2 generation 5 , I found that out when placing my order for an o-ring kit , they kept sending me the wrong kit , the US headquarters sent the wrong valve rod twice , it took them 3 weeks to finally make it right , I’m still waiting for a refund !
Awesome stuff.
Will the new bottles work on the MK2???
yes
Why is it IMPOSSIBLE to find and buy a complete valve assembly for a M3 bottle? So frustrating. You invest nearly $3000 on a rifle and accessories and then can't buy something as essential as a bottle with the correct valve already installed or a valve to install in a bottle. Come on guys!!!!
Just think if they would have put the valve in the bottles they could have sold millions of bottles to the old impact owners ....hmmmm