i have same problem on e39 530i, using pasoft sacn software i cannot access any of the modules except for the dme so i will try this tomorrow and update yall if this is real fix, do you know if this issue is caused by the xenon going bad or maybe caused by aftermarket bulbs as mine are aftermarket and the driver side recently went out
my e46 m3 got one of the headlight not working, and I got the same issue as your but only on the engine electronic side no communication. Will try that later, thought my ecu busted.
Hello Please I can't communicate with my DSC Module at all BMW X3 E83 Tried everything, even changed the module, Nothing, checked the fuse box and relay Everything seems ok Any help? It's very frustrating It's showing Red on ISTA P Control tree page
cluster sometimes yes, but what you guys need to do is disconnecting the most modules possible and connect one by one and doing diag between each new module connected to find the bad module
@@MadmanCar I have the same problems with comunication,right xenon and steering angle sensor. Near the fuse box you have a strip with purple-white wires. This is a strip Can Bus www.newtis.info/tisv2/a/en/e46-320d-tou/wmrfjUv www.newtis.info/tisv2/a/en/e46-320d-tou/VqQVgD4
Thanks man you save one bmw from burning, i unplug almost everything and I forgot that f*** xenon have diagnostic on this line, THANKS
Hey mate. What scan tool would to recommend ?😊
Will it be the same side for right hand drive please or same side as steering wheel?
i have same problem on e39 530i, using pasoft sacn software i cannot access any of the modules except for the dme so i will try this tomorrow and update yall if this is real fix, do you know if this issue is caused by the xenon going bad or maybe caused by aftermarket bulbs as mine are aftermarket and the driver side recently went out
my e46 m3 got one of the headlight not working, and I got the same issue as your but only on the engine electronic side no communication. Will try that later, thought my ecu busted.
Hello
Please I can't communicate with my DSC Module at all
BMW X3 E83
Tried everything, even changed the module, Nothing, checked the fuse box and relay
Everything seems ok
Any help?
It's very frustrating
It's showing Red on ISTA P Control tree page
I have the same issue with e83 x3 2007 , it says k bus line I disconnect every modules and it nothing happen
what app you are using
Dashboard/instrument cluster replace ;) AND hip-hip hurra!
not in my case
@@FREEAIR_1973 Hello! Do you solve problem with bmw?
cluster sometimes yes, but what you guys need to do is disconnecting the most modules possible and connect one by one and doing diag between each new module connected to find the bad module
it doesn't work for E83
Just unplug steering angle sensor
it doesn't help, unplung xenon
@@MadmanCar I have the same problems with comunication,right xenon and steering angle sensor. Near the fuse box you have a strip with purple-white wires. This is a strip Can Bus www.newtis.info/tisv2/a/en/e46-320d-tou/wmrfjUv
www.newtis.info/tisv2/a/en/e46-320d-tou/VqQVgD4
Pin 8 in obd2 socket -> x183 Connector Diagnostic link TXD(near fuse box) -> angle sensor, xenon, abs, instrument cluster .... etc
Hi, I could get INPA to talk to most modules except DSC. I am willing to give unplugging a try. How do I unplug the angle sensor?
@@fungames24 Hello. remove the plastics from wheel and disconnect cable 5min job .